In my script I use the cat and echo commands like this:
And I want to use exec instead, but I have no idea how can I capture the device to the log and printf to the same descriptor. I need the capturing of the modem to check (by grep) if there is any OK response or for example the CONNECT response.
Last edited by krustowski; 06-29-2017 at 08:51 AM..
Hi everyone
I am having some real difficulties getting a dial in modem to work on one of my HP boxes. It's a mux modem on port 7 which I have set up at 9600 baud.
I can dial in, the handshakes are completed, but then it returns incoherent characters on the emulation screen. I think my dial in... (1 Reply)
I've spent enough time trying to put on work Lucent Winmodem in my armada M300 (compaq laptop) I use Mandrake 8.0 but as soon as i get connected
and prompmts appears modem shutsdown.
Does any one had a similar situation, solved it?
cheers (2 Replies)
Hi!
I have a little prob with dialing up to the internet... When I try connect, it says "Sorry, modem is busy"...
Specs:
Laptop
56K modem
Slackware 8.0
Kernel 2.4.5
Cheers;) (4 Replies)
Specs:
Dlink DFE-560EL external modem.
RedHat 7.1
How do you turn off the modem volume? I am getting annoyed of it beeping everytime I use it but there is no switch on the hardware to tune down the volume.
I have tried using minicom and use the following commands:
ATL0
ATM0
Next, I... (2 Replies)
Pleaseee... Helpppp.... !!!
I am using SCO Open Server 5.05. Recently, i have upgraded the system which means transfer all apps and data to the new system. Everything work well except one thing. On my old system i have an external modem which to dial out. Now that i use the same modem on... (4 Replies)
I have got Suse 8.0 by using a modem (US Robotics 56K Faxmodem Ext).
During connection i got the error 16. I tried it under RedHat and Mandrake too.....same problem. What can i do ?
Thanx...a lot...
Logfile:
SuSE Meta pppd (smpppd), Version 0.73 on zuhause.
wwwoffle not is running ... (1 Reply)
Ok. I tried following the directions from some of the other threads, but I've hit a road block.
I have red hat 7.3 and I installed the hcf package:
hcfpcimodem-0.99lnxtbeta03042700k2.4.18_3-1rh.i386.rpm
It installed ok, no errors, but I still can't get linux to find my modem. I've tried... (2 Replies)
Hi all,
Is there any difference between a null modem cable or a modem cable ?
i assume that a null modem cable is a normal cable that i used from cpu serial ports to a modem for dialup.
please correct if i am wrong,
thks (2 Replies)
Hi, my first Sco question so go easy!
We have a customer who is on Sco v5.0.2. We are attempting to talk a consultant on site through how to configure the MODEM in scoadmin. Unfortunately the MODEM install instructions that we work from only work for v5.0.4 and assume that scoadmin has an option... (1 Reply)
hi folks,
i am looking for a analog modem to use it with a solaris9 sparc mashine. as far as i know, solaris communicates with the modem using AT-commands. so do i need a special modem for solaris or just a modem? i am open for everything. PCI-modem, seriell modem, usb modem. what are you using? i... (1 Reply)
Discussion started by: pressy
1 Replies
LEARN ABOUT CENTOS
scsi_ready
SCSI_READY(8) SG3_UTILS SCSI_READY(8)NAME
scsi_ready - do SCSI TEST UNIT READY on devices
SYNOPSIS
scsi_ready [--brief] [--help] [--verbose] DEVICE [DEVICE]*
DESCRIPTION
This bash shell script calls the sg_turs utility on each given DEVICE. This will send a SCSI TEST UNIT READY command to each DEVICE. Disks,
tape drives and DVD/BD players amongst others may respond to this SCSI command.
OPTIONS
Arguments to long options are mandatory for short options as well.
-b, --brief
for each DEVICE given output a line containing either ' ready' or ' device not ready'. If DEVICE is not found or there is
another serious error then an error message will appear instead.
-h, --help
print out the usage message then exit.
-v, --verbose
increase level or verbosity.
EXIT STATUS
The exit status of this script is 0 when it is successful. Otherwise the exit status is that of the last sg_turs utility called. See the
sg3_utils(8) man page.
AUTHORS
Written by D. Gilbert
COPYRIGHT
Copyright (C) 2009-2013 Douglas Gilbert
This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
POSE.
SEE ALSO
sg_turs (sg3_utils)
sg3_utils-1.36 May 2013 SCSI_READY(8)