Both igb0 and igb4 have same mac address, is this intentional ?
I suspect that all the interfaces have system wide mac, check the output of :
In that case you will need to switch that value, and reboot the host to have unique macs for all interfaces.
After that you can use them for grouping.
hi,
i tried to configure an VLAN interface on my SF280 based on the documentation on docs.sun.com
# ifconfig eri1000 plumb up
Oct 21 13:41:26 cmsmaster ip: ip_rput_dlpi(eri1000): DL_ERROR_ACK for DL_ATTACH_REQ(11), errno 8, unix 0
ifconfig: SIOCSLIFNAME for ip: eri1000: no such interface... (2 Replies)
Probe-based IPMP active - active
Probe-based IPMP active - passive
Link-based only active -standby
????
What are differences between
Probe-based IPMP active - passive anddd
Link-based only active -standby
???!!!
For example in active active probe-based IPMP there are
lets... (6 Replies)
Hi all,
so server: FreeBSD 7.0 release,
interfaces on it DLINK DGE-528T with support of vlans :))
so first interface looks to LAN second to ISP.
I created vlan1 with id 1 and gave to it ip address and plug it in
tagged port of swith for vlan 1. so client from vlan1 reaches the server.
it... (2 Replies)
Hi all
My application is a monitoring application that monitors the incoming udp packet when ever required. When ever a particular source ip and port and dest ip and port is provided the filter will be framed based them. For eg,
char filterExpr;
filterExpr = "udp and src host 192.168.16.100... (0 Replies)
Hello. I want to Communicate 2 VLAN with router like this solution:
http://8pic.ir/images/83m0ouih8mmm9s1sfl56.jpg
For this purpose I'm configuring 2 Linux system as a switch and connect 4 host to them. Then a router is added to scenario.
The configuration of the switches is:
On DUT1(Linux):... (1 Reply)
Hi,
Is it possible to VLAN tag with a ce interface on Solaris 9? Link speed is gb.
ce:0:ce0:link_speed 1000
I have a ce0 interface I would need to have access to another VLAN as well as the one it's currently on.
What commands would I need to run?
Thanks.;) (2 Replies)
We have two hosts in same vlan with same route rules.
One of them is not able to connect to an outside IP while in another I get "failed: Connection timed out" while testing the connectivity through netcat.
I have tried mtr /traceroute and it gives me the same results.
Is there a netcat... (1 Reply)
Have 2 nics on physical system
net0 phys 1500 up --
net1 phys 1500 up --
1. I want to create a link aggregation with LACP enabled with above 2 nics
2. Create port-group(Like we create on ESXi) with VLAN-ID 2141
3. And assign this... (0 Replies)
Hi Guys,
Our lpars is currently running on 2 different vlans (20, 30). Now we have a requirement that vlan 30 needs to be change to vlan 31 at the same subnet. I'm not sure on what is the best approach for this or what change is involve on the AIX side.
This is our setup.
Network switch -... (5 Replies)
Discussion started by: kaelu26
5 Replies
LEARN ABOUT DEBIAN
bt-network
bt-network(1) bluez-tools bt-network(1)NAME
bt-network - a bluetooth network manager
SYNOPSIS
bt-network [OPTION...]
Help Options:
-h, --help
Application Options:
-a, --adapter=<name|mac>
-c, --connect <name|mac> <uuid>
-s, --server <gn|panu|nap> <brige>
DESCRIPTION
This utility is used to manage network services (client/server). All servers will be automatically unregistered when the application
terminates.
OPTIONS -h, --help
Show help
-a, --adapter <name|mac>
Specify adapter to use by his Name or MAC address
(if this option does not defined - default adapter used)
-c, --connect <name|mac> <uuid>
Connect to the network device and return the network interface
name, uuid can be either one of "gn", "panu" or "nap"
-s, --server <gn|panu|nap> <brige>
Register server for the provided UUID, every new connection to
this server will be added the bridge interface
AUTHOR
Alexander Orlenko <zxteam@gmail.com>.
SEE ALSO bt-adapter(1)bt-agent(1)bt-audio(1)bt-device(1)bt-input(1)bt-monitor(1)bt-serial(1)
2010-11-22 bt-network(1)