Hi just want to ask if anyone has encounter this error?
emc luns were mounted on the server with GB sizes but when i tried to mount the given luns it were all MB in size.
Can you help me resolve the issue.
thanks in advance
Moderator's Comments:
Please use CODE tags as required by forum rules!
Last edited by RudiC; 03-29-2017 at 03:33 AM..
Reason: Added CODE tags.
I have an sco unix v/386 version 4.26 open server. I need to add a 2nd scsi hard drive. I don't know how to partition & format it as a bootable drive & mount it.
I know this is easy but I'm not familiar.
Thanks (1 Reply)
Hello,
How is it possible to copy the partition of hard drive that have unix on it (it's a scsi hard drive of an Irix (SGI)), under windows xp - what I did till now is to connect the drive to the my pc (windows xp installed) with a scsi adapter and the program partition magic can't recognize the... (2 Replies)
Hi,
we are running solaris 9 on V280R. Due to power failure, one disk's label and lost its details like drive type etc.
Disk details:
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
single partition on slice 6 with UFS.
The below i see when i run "format" command
.....
.....
4.... (1 Reply)
Hi,
I was trying to define a variable as a result of an operation,
b=` echo $a+1 | bc -l`
with a specific format (5 digits integer completing with zeros, 00025, for example)
c=` printf "%05d\n" b `
Does anyone how can it be done in one step in bash shell to get the formatted... (2 Replies)
Hey i have a new USB 320GB harddrive i want to use in my Solaris 10 enviroment.
i first had the drive format in windows with FAT32,
Solaris was able to auto mount this drive and everything was fine, until i realised that it would not except files greater then 4gb, due to the limitations of... (6 Replies)
Hello all,
I have a USB drive mounted on a linux RHEL 4 server which goes offline every now n then.
Here are some logs :
---------------------------------------------
# lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002... (1 Reply)
Hi Friends,
I have the following values in
echo "$csi_tas_id"
echo "$platform"
echo "$region"
I want to display these values as shown below:
CSI_TAS_ID | PLATFORM | REGION
123 | UNIX | SG
231 | AIX ... (1 Reply)
anyone have any idea how do to this with auth_attr?
I suspect if I grant him
solaris.device.:RO::Device Allocation::help=DevAllocHeader.html
that will work but I'm unsure. Just looking for a second opinion. (10 Replies)
Hi,
I am facing issue with one of the drive is solaris 10. it is showing offline in the messages file
scsi: WARNING: /pci@2,600000/QLGC,qlc@0/fp@0,0/ssd@w5006016746e00b1b,0 (ssd0):
drive offline
genunix: WARNING: Page83 data not standards compliant DGC LUNZ 0430
... (1 Reply)
Discussion started by: Prasanth T K
1 Replies
LEARN ABOUT NETBSD
pcscp
PCSCP(4) BSD Kernel Interfaces Manual PCSCP(4)NAME
pcscp -- Advanced Micro Devices Am53c974 PCscsi-PCI SCSI driver
SYNOPSIS
pcscp* at pci? dev ? function ?
scsibus* at pcscp?
DESCRIPTION
The pcscp driver provides support for the Advanced Micro Devices Am53c974 PCscsi-PCI SCSI controller and boards using this chip, including
the Tekram DC-390 PCI SCSI host adapter.
For Tekram DC-390U/UW/F PCI SCSI host adapters, use the siop(4) driver.
For Tekram DC-395U/UW/F PCI SCSI host adapters, use the trm(4) driver.
SEE ALSO cd(4), ch(4), esp(4), intro(4), pci(4), scsi(4), sd(4), ss(4), st(4), uk(4), scsipi(9)
http://www.amd.com/
BUGS
The driver currently ignores EEPROM settings, which establish per-target parameters etc.
BSD February 21, 1999 BSD