Hi just want to ask if anyone has encounter this error?
emc luns were mounted on the server with GB sizes but when i tried to mount the given luns it were all MB in size.
Can you help me resolve the issue.
thanks in advance
Moderator's Comments:
Please use CODE tags as required by forum rules!
Last edited by RudiC; 03-29-2017 at 03:33 AM..
Reason: Added CODE tags.
I have an sco unix v/386 version 4.26 open server. I need to add a 2nd scsi hard drive. I don't know how to partition & format it as a bootable drive & mount it.
I know this is easy but I'm not familiar.
Thanks (1 Reply)
Hello,
How is it possible to copy the partition of hard drive that have unix on it (it's a scsi hard drive of an Irix (SGI)), under windows xp - what I did till now is to connect the drive to the my pc (windows xp installed) with a scsi adapter and the program partition magic can't recognize the... (2 Replies)
Hi,
we are running solaris 9 on V280R. Due to power failure, one disk's label and lost its details like drive type etc.
Disk details:
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
single partition on slice 6 with UFS.
The below i see when i run "format" command
.....
.....
4.... (1 Reply)
Hi,
I was trying to define a variable as a result of an operation,
b=` echo $a+1 | bc -l`
with a specific format (5 digits integer completing with zeros, 00025, for example)
c=` printf "%05d\n" b `
Does anyone how can it be done in one step in bash shell to get the formatted... (2 Replies)
Hey i have a new USB 320GB harddrive i want to use in my Solaris 10 enviroment.
i first had the drive format in windows with FAT32,
Solaris was able to auto mount this drive and everything was fine, until i realised that it would not except files greater then 4gb, due to the limitations of... (6 Replies)
Hello all,
I have a USB drive mounted on a linux RHEL 4 server which goes offline every now n then.
Here are some logs :
---------------------------------------------
# lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002... (1 Reply)
Hi Friends,
I have the following values in
echo "$csi_tas_id"
echo "$platform"
echo "$region"
I want to display these values as shown below:
CSI_TAS_ID | PLATFORM | REGION
123 | UNIX | SG
231 | AIX ... (1 Reply)
anyone have any idea how do to this with auth_attr?
I suspect if I grant him
solaris.device.:RO::Device Allocation::help=DevAllocHeader.html
that will work but I'm unsure. Just looking for a second opinion. (10 Replies)
Hi,
I am facing issue with one of the drive is solaris 10. it is showing offline in the messages file
scsi: WARNING: /pci@2,600000/QLGC,qlc@0/fp@0,0/ssd@w5006016746e00b1b,0 (ssd0):
drive offline
genunix: WARNING: Page83 data not standards compliant DGC LUNZ 0430
... (1 Reply)
Discussion started by: Prasanth T K
1 Replies
LEARN ABOUT DEBIAN
ppmtosixel
ppmtosixel(1) General Commands Manual ppmtosixel(1)NAME
ppmtosixel - convert a portable pixmap into DEC sixel format
SYNOPSIS
ppmtosixel [-raw] [-margin] [ppmfile]
DESCRIPTION
Reads a portable pixmap as input. Produces sixel commands (SIX) as output. The output is formatted for color printing, e.g. for a DEC
LJ250 color inkjet printer.
If RGB values from the PPM file do not have maxval=100, the RGB values are rescaled. A printer control header and a color assignment table
begin the SIX file. Image data is written in a compressed format by default. A printer control footer ends the image file.
OPTIONS -raw If specified, each pixel will be explicitly described in the image file. If -raw is not specified, output will default to com-
pressed format in which identical adjacent pixels are replaced by "repeat pixel" commands. A raw file is often an order of magni-
tude larger than a compressed file and prints much slower.
-margin
If -margin is not specified, the image will be start at the left margin (of the window, paper, or whatever). If -margin is speci-
fied, a 1.5 inch left margin will offset the image.
PRINTING
Generally, sixel files must reach the printer unfiltered. Use the lpr -x option or cat filename > /dev/tty0?.
BUGS
Upon rescaling, truncation of the least significant bits of RGB values may result in poor color conversion. If the original PPM maxval was
greater than 100, rescaling also reduces the image depth. While the actual RGB values from the ppm file are more or less retained, the
color palette of the LJ250 may not match the colors on your screen. This seems to be a printer limitation.
SEE ALSO ppm(5)AUTHOR
Copyright (C) 1991 by Rick Vinci.
26 April 1991 ppmtosixel(1)