Sponsored Content
Operating Systems AIX Power8 S812L:HMC issue and ... Post 302961823 by agent.kgb on Friday 4th of December 2015 06:55:44 AM
Old 12-04-2015
1. what do you mean "it does not recognize the hard drive and Ethernet card"? Can you show an error, or what happens, when you try to boot up the server?

2. you don't need an HMC, if you have only this one server.
This User Gave Thanks to agent.kgb For This Post:
 

10 More Discussions You Might Find Interesting

1. AIX

Hmc

Well i am right now working on an IBM P550 risc server with an HMC connected.. The server has 2 logical partitions (Lpar). both lpar is having Aix 5.3 installed. Now I have a doubt.. is it possible to have Aix in one lpar and windows 2003 in another.. cheers Bala (4 Replies)
Discussion started by: balaji_prk
4 Replies

2. AIX

Hmc

Hello everybody, had a question. Iam having a p650 box here, System Model: IBM,7038-6M2 Machine Serial Number: 1078DCC managed system - 1 which has 2 lpars on it i added memory to the box(made sure that memory added was in proper quads and was verified by a CE) after i rebooted the box, the... (4 Replies)
Discussion started by: karthikosu
4 Replies

3. AIX

CDROM Issue on LPAR HMC VIO

Whenever I assign/unassign a CDROM ( RAID CTRL ) to Active LPAR from HMC, I have to reboot the LPAR. How can I do it without rebooting the LPARS. POWER6 with HMC LPARS = AIX 6.1 Any info developerWorks : AIX and UNIX : PowerVM Forum : Moving CD-ROM/DVD-ROM dynamically ... But... (5 Replies)
Discussion started by: filosophizer
5 Replies

4. AIX

AIX and HMC installation issue

I started the AIX install with a fiber channel disk, and let it run: restricted by GSA ADP Schedule Contract with IBM Corp. . . . . . << End of copyright notice for perfagent.tools >>. . . . ... (2 Replies)
Discussion started by: Gideon1a
2 Replies

5. AIX

HMC Commands

Hello All, Can anybody knows a command, what I can check the processes in the HMC restricted shell? :wall: (1 Reply)
Discussion started by: kalaso
1 Replies

6. AIX

[TIP] Migration to POWER8

Read "Migration to POWER8" article to get prepared for migration to POWER8: link removed, advertisement (0 Replies)
Discussion started by: pave01
0 Replies

7. AIX

New IBM Power8 (S822) and StorWiz V3700 SAN, best practices for production setup/config?

Hello, Got a IBM Power8 box (S822) that I am configuring for replacement of our existing IBM machine. Wanted to touch base with the expert community here to ensure I don't miss anything critical in my setup/config of AIX. Did a fresh AIX 7.1 install on the internal scsi hdisk, mirror'ed... (3 Replies)
Discussion started by: c3rb3rus
3 Replies

8. AIX

StorWize v3700 and Power8 (S822) AIX, configuration best practice for LUNs?

Hello, We have an Power8 System (S822) and a IBM StorWize v3700 SAN. The OS is AIX 7.1. With this hardware from what I read I need to download/install special SDDPCM drivers, so I did (SDDPCM VERSION 2.6.6.0 (devices.sddpcm.71.rte). I carved my volumes in the StorWize and presented to... (3 Replies)
Discussion started by: c3rb3rus
3 Replies

9. AIX

HMC in VmWare NIC sl0 issue.

Hi There, First of all I'm new to *nix world, so bear with me and English is not my native tongue :) Now I'm working on the HMC 7.3.3.0 ServPack:0 base_version:20080402.1 to make it work in VmWare (testing in Workstation) I've got HMC installed and realized that network options in GUI... (8 Replies)
Discussion started by: JKat
8 Replies

10. AIX

IBM Power Linux Cluster Fence device on Power8 Platform

wasn't quite sure which forum to post in. What typical fence device to configure for a Power Linux PaceMaker Cluster running on the Power8 Platform (S822 Model of hardware), or what should be ordered with the S822 for use as a Fence Device? (5 Replies)
Discussion started by: mrmurdock
5 Replies
SN(4)							   BSD Kernel Interfaces Manual 						     SN(4)

NAME
sn -- National Semiconductor DP83932 (SONIC) based Ethernet device driver SYNOPSIS
arc sn0 at jazzio? mac68k sn* at obio? sn* at nubus? DESCRIPTION
The sn interface provides access to a 10 Mb/s Ethernet network via the National Semiconductor DP83932 (SONIC) Ethernet chip set. Each of the host's network addresses is specified at boot time with an SIOCSIFADDR ioctl(2). The sn interface employs the address resolution protocol described in arp(4) to dynamically map between Internet and Ethernet addresses on the local network. HARDWARE
arc The sn driver supports on-board JAZZ based SONIC interfaces found on Acer PICA and NEC machines. mac68k The sn driver is currently known to support the following NuBus cards: o Apple LC Twisted-pair (part #820-0532-A) PDS card o Cayman Gatorcard PDS o Dayna DaynaPort/E30 In addition, the sn interface supports the following interfaces: o on-board Ethernet for non-AV Quadras o on-board Ethernet for 500-series PowerBooks o Apple CS Ethernet Twisted-pair card for Comm Slot found on LC575, Quadra 630, LC630, and Performa 580. DIAGNOSTICS
sn%d: transmit FIFO underrun sn%d: receive FIFO overrun sn%d: receive buffer exceeded sn%d: receive buffers exhausted sn%d: receive descriptors exhausted These messages indicate that the interface gets errors (due to heavy load etc.) and reinitialized. SEE ALSO
arp(4), inet(4), netintro(4), ifconfig(8) HISTORY
The sn interface for mac68k, which was derived from a driver for old NetBSD/pica port, first appeared in NetBSD 1.3. Jason Thorpe has rewritten a new machine independent SONIC driver which uses bus_dma(9) and bus_space(9) APIs after NetBSD 1.5 release, and NetBSD/arc has been switched to using the machine independent (MI) driver. NetBSD/mac68k has also been switched to using the MI driver after the NetBSD 4.0 release. BSD
May 16, 2009 BSD
All times are GMT -4. The time now is 04:51 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy