01-15-2014
I would not disable a bunch of features just for the heck of it. First I would try the "pci=noaer" by itself. The pci express error reporting is new to redhat 6 and redhat's docs suggest to turn it off to address a kernel hang somewhat similiar to yours. This is my reason to suggest disabling it. If that didn't work, maybe I would try something else. But I would try one change at a time. Then if it starts working you know which change fixed it.
10 More Discussions You Might Find Interesting
1. SuSE
this may be something trivial to many of you, but is there a way to purposely cause a process to hang? (6 Replies)
Discussion started by: laila63
6 Replies
2. AIX
Hello there!
I have a RS-6000 7043-140 machine with AIX version 4.1.5, that is
working for almost 8 years now. It has a tty monitor. My problem
started when I upgraded my machine to install a gxt250 graphics adapter
card together with a 15" AOC VGA Monitor, logitech keyboard and mouse, ... (2 Replies)
Discussion started by: bright_genius
2 Replies
3. Solaris
I have an ultra 10 system, and am trying to install and verify a previously cloned hard drive, to make sure it works, that it really is a duplicate of the hard drive currently on an other server, etc.
I plugged in this cloned hard drive as master, only drive in the system.
No network LAN... (2 Replies)
Discussion started by: HikerLT
2 Replies
4. UNIX for Dummies Questions & Answers
Hi, I have a Unix box running HP-UX 10.20 and it suddenly won't boot. Every time it goes down the boot checklist, it hangs on "NFS client subsystem" and just continues to say busy/wait. I have read something about the /etc/auto_master but don't quite understand what has to happen to fix it. ... (4 Replies)
Discussion started by: Asheley Ryan
4 Replies
5. AIX
Why is one of my blade hanging and does nothing after trying to boot from CD???
==================
I tried to press 1....JS20 does not support SMS menu
Here's what I see after 30 minutes...
-------------------------------------------------------------------------------
... (0 Replies)
Discussion started by: mifch
0 Replies
6. Linux
Hi guys,
i explain my problem:
I've FC10 64bit installed on a server Dell R410.
When i boot the system with eth0 or eth1 linked (only one eth linked), all work fine and the system start normally.
When i boot the system with eth0 + eth1 linked,
the system hang when the rpcind service... (1 Reply)
Discussion started by: andreaden
1 Replies
7. SCO
Hi folks,
I had problems trying to install SCO OpenServer 6 on a PC with no floppy drive and a SATA CD drive.
Eventually after advice received on this forum last week, I adopted a different approach by fitting the LSI HBA RAID adapter and associated disks into an older PC that does have CD and... (4 Replies)
Discussion started by: millosman
4 Replies
8. BSD
Hi Experts,
I am facing one problem here which is one process always stuck in running state which causes the other similar process to sleep state . This causes my system in hanged state.
On doing cat /proc/<pid>wchan showing the "__init_begin" in the output.
Can you please help me here... (0 Replies)
Discussion started by: naveeng
0 Replies
9. UNIX for Advanced & Expert Users
Hi Experts,
I am facing one problem here which is one process always stuck in running state which causes the other similar process to sleep state . This causes my system in hanged state.
On doing cat /proc/<pid>wchan showing the "__init_begin" in the output.
Can you please help me here... (1 Reply)
Discussion started by: naveeng
1 Replies
10. UNIX for Advanced & Expert Users
Hi Experts,
I am facing one problem here which is one process always stuck in running state which causes the other similar process to sleep state . This causes my system in hanged state.
On doing cat /proc/<pid>wchan showing the "__init_begin" in the output.
Can you please help me here... (6 Replies)
Discussion started by: naveeng
6 Replies
LEARN ABOUT NETBSD
stpcide
STPCIDE(4) BSD Kernel Interfaces Manual STPCIDE(4)
NAME
stpcide -- STMicroelectronics STPC IDE disk controllers driver
SYNOPSIS
stpcide* at pci? dev ? function ? flags 0x0000
DESCRIPTION
The stpcide driver supports the STMicroelectronics STPC x86 SoC internal IDE controllers, and provides the interface with the hardware for
the ata(4) driver. The driver features DMA mode 2 and PIO mode 4 transfer speeds.
The 0x0002 flag forces the stpcide driver to disable DMA on chipsets for which DMA would normally be enabled. This can be used as a debug-
ging aid, or to work around problems where the IDE controller is wired up to the system incorrectly.
SEE ALSO
ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)
BUGS
The timings used for the DMA and PIO modes are for STPC Atlas and its siblings with their PCI clock configured at 33 MHz. Other speeds
including the STPC Vega Ultra-IDE controller will need adjustments.
BSD
October 31, 2003 BSD