Sponsored Content
Full Discussion: Failed mpio path on AIX5.3
Operating Systems AIX Failed mpio path on AIX5.3 Post 302875321 by murali969 on Tuesday 19th of November 2013 08:47:03 AM
Old 11-19-2013
Code:
using IBM v7000 storage.

Unable to find the as below host mappings in storage end

5005076802308847,8000000000000:fscsi0:Available:Enabled
5005076802308846,8000000000000:fscsi0:Available:Enabled
5005076802408847,8000000000000:fscsi3:Available:Failed
5005076802408846,8000000000000:fscsi3:Available:Enabled

Please help me any other way to find this.

---------- Post updated at 08:47 AM ---------- Previous update was at 08:26 AM ----------

Code:
Lsdev -Ccdisk info as below

hdisk0  Available 00-08-00 SAS Disk Drive
hdisk1  Available 00-08-00 SAS Disk Drive
hdisk2  Available 05-01-01 MPIO IBM 2076 FC Disk
hdisk3  Available 05-01-01 MPIO IBM 2076 FC Disk
hdisk4  Available 05-01-01 MPIO IBM 2076 FC Disk
hdisk5  Available 05-01-01 MPIO IBM 2076 FC Disk
hdisk6  Available 05-01-01 MPIO IBM 2076 FC Disk
hdisk7  Available 05-01-01 MPIO IBM 2076 FC Disk
hdisk8  Available 05-01-01 MPIO IBM 2076 FC Disk
hdisk9  Available 05-01-01 MPIO IBM 2076 FC Disk
hdisk10 Available 05-01-01 MPIO IBM 2076 FC Disk

 

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

AIX MPIO and EMC

We are looking at running MPIO for it's redundancy and load balancing benefits. Does anyone know what pieces of software or modules are needed on the VIO server to get load balancing to work. Remember we are using EMC's DMX3500 storage system. We no longer want to use Powerpath. :rolleyes: ... (2 Replies)
Discussion started by: vxg0wa3
2 Replies

2. Solaris

path 108528-29 failed

Hi All, The path requires me to go Single User mode. On single user mode, the patch still won't continue: dhcpagent supports a new keyword in /etc/default/dhcpagent. Please merge the existing /etc/default/dhcpagent with the patched version of /etc/default/dhcpagent shipped with this... (2 Replies)
Discussion started by: itik
2 Replies

3. AIX

AIX native MPIO

Hi folks, does anybody have a link to a documentation how to implement native MPIO on AIX? We are using EMC PowerPath and Datacore SanSymphony/Cambex for this so far and I wasn't able to find a good description on that topic. All I know so far is that mkpath, chpath and lspath are used to... (3 Replies)
Discussion started by: zaxxon
3 Replies

4. AIX

How to upgrade AIX5.3TL6-07 to AIX5.3TL8-04?

Hello All, After creating lpp_source/spot from AIX 5.3TL6-07 DVD on the NIM(AIX6.1), I went online and download the fix pack for reaching TL8-04. (it was less than 200Mgegs total) then I did define a newer lpp_source530TL8-04 via a copy from the older lpp_source530TL6-07 (I diduse a command... (2 Replies)
Discussion started by: sangers
2 Replies

5. AIX

MPIO Driver

On a particular LPAR, I was running AIX 5.3 TL 3. On Monday I did an update of the LPAR to 5.3 TL 9 SP2. The install was smooth, but then I ran into a problem. The MPIO driver does not work with LSI's StoreAge (SVM4). I did some looking, and looks like 5.3 TL3 = IBM.MPIO 5.3.0.30 5.3... (0 Replies)
Discussion started by: clking
0 Replies

6. AIX

MPIO reliability

Hi, we have a vew boxes using MPIO and they are connected to some virtualization software managing some disk subsystems, offering volumes to the AIX boxes. Sometimes when a cable has been plugged out for a test or when a real problem occurs, using lspath to show the state of the paths shows... (8 Replies)
Discussion started by: zaxxon
8 Replies

7. AIX

MPIO - list of supported arrays

Hello, we are planning to deploy some of our databases on AIX/LPAR based servers (we didn't bought it yet ...). IBM's engineers says that if we want to boot them from SAN the hardware array has to be compatible with MPIO but they don't want to deliver any document with list of arrays supported... (5 Replies)
Discussion started by: andy55
5 Replies

8. AIX

Need Help with SDD / SDDPCM / MPIO

This is getting very confusing for me, and appreciate if someone can help. Platform: Power VM ( Virtual I/O Server) ioslevel 2.1.3.10-FP23 # oslevel -s 6100-05-00-0000 Storage: IBM DS4300 Two HBAs - Dual Port Fibre Adapter Channels Each card has two ports , so a total of 4 ports going... (3 Replies)
Discussion started by: filosophizer
3 Replies

9. AIX

DISK and MPIO

Hello, I have some concerns over the disk management of my AIX system. For example server1 / > lspv hdisk0 00fa6d1288c820aa rootvg active hdisk1 00fa6d1288c8213c vg_2 active hdisk2 00c1cc14d6de272b ... (6 Replies)
Discussion started by: Phat
6 Replies

10. AIX

issue AIX MPIO path closed

Hello, I have encountered the issue on my AIX 6.1. As you can see below, the hdisk1 & hdisk8 are not recognized by the system / > lspv hdisk0 00fa6d1288c820aa rootvg active hdisk1 00fa6d1288c8213c None hdisk2 ... (9 Replies)
Discussion started by: Phat
9 Replies
TR(4)							   BSD Kernel Interfaces Manual 						     TR(4)

NAME
tr -- TROPIC based shared memory Token-Ring cards device driver SYNOPSIS
tr0 at isa? port 0xa20 iomem 0xd800 irq ? tr* at isa? port ? irq ? tr* at isapnp? tr* at mca? slot ? tr* at pcmcia? function ? DESCRIPTION
The tr device driver supports TROPIC I based shared-memory Token-Ring cards. HARDWARE
Supported cards include the following IBM and 3Com models: IBM Token-Ring Network PC Adapter IBM Token-Ring Network PC Adapter II IBM Token-Ring Network Adapter/A IBM Token-Ring Network 16/4 Adapter IBM Token-Ring Network 16/4 Adapter/A IBM Token-Ring 16/4 Credit Card Adapter IBM Token Ring Auto 16/4 Credit Card Adapter IBM Turbo 16/4 Token Ring PC Card IBM 16/4 ISA Adapter IBM Auto 16/4 Token-Ring ISA Adapter IBM Token Ring 16/4 Credit Card Adapter IBM Token Ring Auto 16/4 Credit Card Adapter IBM Turbo 16/4 Token Ring PC Card 3Com 3C619 TokenLink 3Com 3C319 TokenLink Velocity 3Com 3C389 TokenLink Velocity PC Card SOURCE ROUTING
Setting IFF_LINK0 enables Token-Ring source routing. Setting IFF_LINK1 uses all-routes broadcasts otherwise single-route broadcasts are used. NOTES
The MCA attachment has been only tested on IBM Token Ring 16/4 Adapter/A so far. It doesn't support ifmedia(4) yet, too. SEE ALSO
ifmedia(4), intro(4), isa(4), isapnp(4), mca(4), pcmcia(4), ifconfig(8) HISTORY
The tr driver appeared in NetBSD 1.4. BUGS
The PCMCIA attachment does not work with the cbb(4) CardBus driver. BSD
April 14, 1999 BSD
All times are GMT -4. The time now is 01:33 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy