What brand is your primary computer? Post: 302815825

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Must they be installed in Primary partition?

Hi, there. I know FreeBSD must be installed in primary and Linux can be installed in extended. What about NetBSD, OpenBSD and Solaris for x86? They must be installed in primary, too?

2. UNIX for Dummies Questions & Answers

Cable Modem, Unix, XP Computer Primary, need advice setup!

I have a XP computer which is my primary. I recently, well just today installed a old version of Mandrake Linux 6.5 I had laying on a self collecting dust on a old PII 233mhz that had to be vacummed out before I could use it. I have my XP computer connected by 10/100 NIC to a cable modem. My...

3. Linux

setting primary dns

Hi, I am running Fedora 7. I seem to remember there being a command to determine the primary dns. Can anyone help me find out what it is? Thanks!

4. AIX

hacmp 5.3 primary and standby?

Hi All, How do I determine if a hacmp 5.3 server is a primary or a standby? Thanks in advance.

5. Linux

primary partition size

hi I am trying to create primary,extended and logical partitions. when I try to create a primary partition, I can give it maximum 1027M (1gb). Why?

6. Solaris

copying from mirror to primary

Hi Anybody, I have a primary disk and mirror disk They are not synced properly. Even though i attached the mirrors. Now i want to copy one directory which is in primary to mirror disk. Is that possible ,, kindly guide me Regards Rj

7. Linux

Secondary linux dist WITHIN primary one

Hi New here so forgive my ignorance and inability to express myself in an informative manner ;) I have a Fedora distribution installed on my development computer. The system we build is meant to run on a slackware dist which is all fine and well. But due to our flow of deployment I would have...

8. Ubuntu

primary group for user

HI I need to know what is the primary group name of a particular user. How to do this ? Maybe with groups cmd ? (first group name in line, is the primary group) thx for help.

9. Solaris

DNS Primary and Secondary

hi there, i using salaris 10 as my DNS server. i have 2 dns server primary and secondary. if primary dns server i edit/update, the other secondary dns server must be sync too. How can i configure if dns server (primary) can sync the secondary?

10. UNIX for Beginners Questions & Answers

Primary group

Is it possible user without a primary group

LEARN ABOUT NETBSD

bwi

BWI(4)							   BSD Kernel Interfaces Manual 						    BWI(4)

NAME

     bwi -- Broadcom BCM430x/4318 IEEE 802.11b/g wireless network driver

SYNOPSIS

     bwi* at pci? dev ? function ?

DESCRIPTION

     The bwi driver provides support for Broadcom BCM430x/4318 wireless network adapters.  For more information on configuring this device, see
     ifconfig(8).

   MIB Variables
     The following per-interface variables are implemented in the hw.bwiX branch of the sysctl(3) MIB.

     debug	  Debug flags.

     dwell_time   Channel dwell time during scan (msec).

     fw_version   Firmware version.

     led_idle	  Number of ticks before LED enters idle state.

     led_blink	  Allow LED to blink.

     txpwr_calib  Enable software TX power calibration.

HARDWARE

     The following cards are among those supported by the bwi driver:

	   Card 		    Chip       Bus	   Standard
	   Buffalo WLI-PCI-G54S     BCM4306    PCI	   b/g
	   Dell Wireless 1370	    BCM4318    Mini PCI    b/g
	   Dell Wireless 1470	    BCM4318    Mini PCI    b/g
	   Dell Truemobile 1400     BCM4309    Mini PCI    b/g
	   Dell Latitude D505	    BCM4306    PCI	   b/g
	   Apple AirPort Extreme			   b/g

FILES

     The firmware for the adapter is not shipped with NetBSD and must be obtained separately.  An archive with firmware files that are known to
     work can be found at:

	   http://leaf.dragonflybsd.org/~sephe/bwi/v3.tbz

     The firmware files conventionally reside in /libdata/firmware/bwi and will be loaded when the interface is brought up.  Note: the v3 subdi-
     rectory in the above firmware archive should exist in the firmware folder.  The full list of paths checked for firmware can be found in the
     hw.firmware.path sysctl(3) node.

SEE ALSO

     arp(4), ifmedia(4), pci(4), ifconfig(8), sysctl(8), wiconfig(8), wpa_supplicant(8)

HISTORY

     The bwi driver first appeared in NetBSD 6.0.

AUTHORS

     The bwi driver was written by Sepherosa Ziehau for Dragonfly BSD.	It was ported to NetBSD by Taylor R. Campbell <campbell@mumble.net>.

     The hardware specification was reverse engineered by the people at http://bcm-specs.sipsolutions.net.  Thanks go also to johill and mb on the
     #bcm-specs channel.

BUGS

     BCM4306 and BCM4309 chips do not work properly on channel 1, 2, and 3.

     The NetBSD driver does not yet support cardbus devices.

BSD
								  March 24, 2009							       BSD

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Must they be installed in Primary partition?

Discussion started by: HOUSCOUS

2. UNIX for Dummies Questions & Answers

Cable Modem, Unix, XP Computer Primary, need advice setup!

Discussion started by: garfunkle

3. Linux

setting primary dns

Discussion started by: user23

4. AIX

hacmp 5.3 primary and standby?

Discussion started by: itik

5. Linux

primary partition size

Discussion started by: tjay83

6. Solaris

copying from mirror to primary

Discussion started by: jegaraman

7. Linux

Secondary linux dist WITHIN primary one

Discussion started by: inquam