how can I find cpu usage memory usage swap usage and
I want to know CPU usage above X% and contiue Y times and memory usage above X % and contiue Y times
my final destination is monitor process
logical volume usage above X % and number of Logical voluage above
can I not to... (3 Replies)
Hi,
I want to monitor the current cpu usage, monitor usage , disk I/o and network utlization for solaris using SNMP.
I want the oids for above tasks.
can you please tell me that
Thank you (2 Replies)
Hi,
Im working on Solaris 9 on SPARC-32 bit running on an Ultra-80, and I have to find out the following:-
1. Total Physical Memory in the system(total RAM).
2. Available Physical Memory(i.e. RAM Usage)
3. Total (Logical) Memory in the system
4. Available (Logical) Memory.
I know... (4 Replies)
Hi,
When running top on linux redhat machine , i see that i have 16gb of memory
in my machine and about 14.5gb of memory are in use:
Mem: 16395780k total, 14970960k used, 1424820k free, 370264k buffers
Swap: 4192956k total, 25824k used, 4167132k free, 12029400k cached
How can i... (3 Replies)
Hi,
How can I find total CPU usage in percentage? e.g. if my system has 8 CPUs and I want to list total usage for all of them, is it possible through a command?
I have tried some of the commands like top, mpstat, sar. The output of those commands has to be manipulated to derive the percentage... (14 Replies)
Hi all,
Is it possible to get total memory usage and free memory usage without top? By Googling I found for total memory usage, use vmstat, for CPU, use mpstat, for disk I/O use iostat, is this correct? Will using sar gives the same result as ALL of these three (3) commands?
What about if I... (2 Replies)
Hi all,
Can you please tell me the command, with which one can know the amount of space a specific directory has used.
df -k . ---> Displays, the amount of space allocated, and used for a directory.
du -k <dir name> - gives me the memory used of all the files inside <dir>
But i... (2 Replies)
Hi,
I would like to know how to find Total Memory of Vio Server? I have used command prtconf | grep Memory , though this command is showing allocated memory of vio server.
But I would like to find out Total Memory of VIO Server,
Though this can be find out using browser http://<ip address... (9 Replies)
Let's say i have 20 users logged on Server. How can I know how much memory percent used each of them is using with system time in each user? (2 Replies)
Discussion started by: roy1912
2 Replies
LEARN ABOUT BSD
ram
RAM(4) Kernel Interfaces Manual RAM(4)NAME
ram - ram disk driver
SYNOPSIS
/sys/conf/SYSTEM:
NRAM ram_size # RAM disk size (512-byte blocks)
major device number(s):
block: 3
minor device encoding:
must be zero (0)
DESCRIPTION
The ram pseudo-device provides a very fast extended memory store. It's use is intended for file systems like /tmp and applications which
need to access a reasonably large amount of data quickly.
The amount of memory dedicated to the ram device is controlled by the NRAM definition in units of 512-byte blocks. This is also patchable
in the system binary through the variable ram_size (though a patched system would have to be rebooted before any change took effect; see
adb(1)). This makes it easy to test the effects of different ram disk sizes on system performance. It's important to note that any space
given to the ram device is permanently allocated at system boot time. Dedicating too much memory can adversely affect system performance
by forcing the system to swap heavily as in a memory poor environment.
The block file accesses the ram disk via the system's buffering mechanism through a buffer sharing arrangement with the buffer cache. It
may be read and written without regard to physical disk records. There is no `raw' interface since no speed advantage is gained by such an
interface with the ram disk.
DISK SUPPORT
The ram driver does not support pseudo-disks (partitions). The special files refer to the entire `drive' as a single sequentially
addressed file.
A typical use for the ram disk would be to mount /tmp on it. Note that if this arrangement is recorded in /etc/fstab then /etc/rc will
have to be modified slightly to do a mkfs(8) on the ram disk before the standard file system checks are done.
FILES
/dev/ram block file
/dev/MAKEDEV script to create special files
/dev/MAKEDEV.local script to localize special files
SEE ALSO hk(4), ra(4), rl(4), rk(4), rp(4), rx(4), si(4), xp(4)dtab(5), autoconfig(8)DIAGNOSTICS
ram: no space. There is not enough memory to allocate the space needed by the ram disk. The ram disk is disabled. Any attempts to access
it will return an error.
ram: not allocated. No memory was allocated to the ram disk and an attempt was made to open it. Either not enough memory was available at
boot time or the kernel variable ram_size was set to zero.
BUGS
The ram driver is only available under 2.11BSD.
3rd Berkeley Distribution Januray 27, 1996 RAM(4)