Below are the new luns added by the storage team. My cluster setup is a three node HA cluster. I could see the below mentioned luns on all the three nodes :
and we tried to extend the shared volume group through the following steps.
smitty hacmp-->System Management (C-SPOC)-->HACMP Logical Volume Management -->Shared Volume Group-->set Characteristics of a shared volume group-->Add a volume to a shared volume group
We have selected the following shared volume group and resource name.
esbsirg3, sirg3vg1
then selected the new disks..i.e hdisk 26 and hdisk27. After hitting enter, we got the following error..
cl_extendvg: Error executing extendvg sirg3vg1 hdisk27 hdisk26 on node esbsit03
Hello
I am a noobie to HACMP
I have 2 55A servers and a 7031 disk subsystem
For HACMP to work, do I need to have the hdisks on both servers to match the same drives??
The hdisks on each box are currently different:
hdisk0 and hdisk1 are the internal disks and hdisk2-5 are on the D24 on... (1 Reply)
I would like to extend a logical drive on our 3510. I have four unallocated disks which I would like to use for this purpose.
The 3510 supports a Sun Cluster but for now all I wish to see is a "new" disk when I run format.
I am a little familiar with the telnet/ssh session on the 3510 but am... (2 Replies)
Hello,
This morning we have added 6 new disks (73 Gb) to our DS4300, then created a new Array en then created a logical drive, after this was done, teh following error occourd on the last 3 (new)disks:
Date/Time: 22-4-08 6:56:26
Sequence number: 5472
Event type: 282D
Event category:... (1 Reply)
Hi,
Can anybody advice whether it is possible to configure HACMP in HP-UX Server.
To my knowledge HACMP is IBM Solution.
Thanks && Regards,
N. Poorna Chandra Rao. (2 Replies)
Hi all,
I have an HACMP (v5.3.0.0) cluster vg attached to ibm shark that need to be decommissioned. The data need to move to the HP EVA disk. The OS is on AIX 5200-10. The plan is to add a new disk from EVA & mirror the existing vg & break the mirror from Shark disk once the mirror finished.
... (12 Replies)
I need some help with adding lines to file and substitute a pattern.
Ok I have a file:
#cat names.txt
name: John Doe
stationed: 1
name: Michael Sweets
stationed: 41
.
.
.
And would like to change it to:
name: John Doe
employed
permanently
stationed: 1-office (7 Replies)
hi,
when I do a failover, hacmp always starts db2 but recently it fails to start db2..noticed the issue is db2nodes.cfg is not modified by hacmp and is still showing primary node..manually changed the node name to secondary after which db2 started immediately..unable to figure out why hacmp is... (4 Replies)
Hi,
I have a 2 node Cluster. Which is working in active/passive mode (i.e Node#1 is running and when it goes down the Node#2 takes over)
Now there's this requirement that we need a mount point say /test that should be available in active node #1 and when node #1 goes down and node#2 takes... (6 Replies)
Previous forum threads have noted that AIX cannot use iSCSI disks because it fails when trying to add them to a volume group using mkvg. The failure is caused by AIX's use of the SCSI "WRITE AND VERIFY"(0x2e) command which some iSCSI targets do not support.
We experienced the same problem using... (1 Reply)
I have an array in an external file, "array.txt", which contains:
char *testarray={"Zero", "One", "Two", "Three", "Four", "Five", "Six", "Seven", "Eight", "Nine"};I want to be able to add an element to this array, and have that element display, whenever I call it, without having to recompile... (29 Replies)
Discussion started by: ignatius
29 Replies
LEARN ABOUT HPUX
cmdeleteconf
cmdeleteconf(1m)cmdeleteconf(1m)NAME
cmdeleteconf - Delete either the cluster or the package configuration
SYNOPSIS
cmdeleteconf [-f] [-v] [-c cluster_name] [[-p package_name]...]
DESCRIPTION
cmdeleteconf deletes either the entire cluster configuration, including all its packages, or only the specified package configuration. If
neither cluster_name nor package_name is specified, cmdeleteconf will delete the local cluster's configuration and all its packages. If
the local node's cluster configuration is outdated, cmdeleteconf without any argument will only delete the local node's configuration. If
only the package_name is specified, the configuration of package_name in the local cluster is deleted. If both cluster_name and pack-
age_name are specified, the package must be configured in the cluster_name, and only the package package_name will be deleted. cmdelete-
conf with only cluster_name specified will delete the entire cluster configuration on all the nodes in the cluster, regardless of the con-
figuration version. The local cluster is the cluster that the node running the cmdeleteconf command belongs to.
Only a superuser, whose effective user ID is zero (see id(1) and su(1)), can delete the configuration.
To delete the cluster configuration, halt the cluster first. To delete a package configuration you must halt the package first, but you do
not need to halt the cluster (it may remain up or be brought down). To delete the package VxVM-CVM-pkg (HP-UX only), you must first delete
all packages with STORAGE_GROUP defined.
While deleting the cluster, if any of the cluster nodes are powered down, the user can choose to continue deleting the configuration. In
this case, the cluster configuration on the down node will remain in place and, therefore, be out of sync with the rest of the cluster. If
the powered-down node ever comes up, the user should execute the cmdeleteconf command with no argument on that node to clean up the config-
uration before doing any other Serviceguard command.
Options
cmdeleteconf supports the following options:
-f Force the deletion of either the cluster configuration or the package configuration.
-v Verbose output will be displayed.
-c cluster_name
Name of the cluster to delete. The cluster must be halted already, if intending to delete the cluster.
-p package_name
Name of an existing package to delete from the cluster. The package must be halted already. There should not be any
packages in the cluster with STORAGE_GROUP defined before having a package_name of VxVM-CVM-pkg (HP-UX only).
RETURN VALUE
Upon completion, cmdeleteconf returns one of the following values:
0 Successful completion.
1 Command failed.
EXAMPLES
The high availability environment contains the cluster, clusterA , and a package, pkg1.
To delete package pkg1 in clusterA, do the following:
cmdeleteconf -f -c clusterA -p pkg1
To delete the cluster clusterA and all its packages, do the following:
cmdeleteconf -f -c clusterA
AUTHOR
cmdeleteconf was developed by HP.
SEE ALSO cmcheckconf(1m), cmapplyconf(1m), cmgetconf(1m), cmmakepkg(1m), cmquerycl(1m).
Requires Optional Serviceguard Software cmdeleteconf(1m)