Sponsored Content
Operating Systems Solaris Cloning machine from sun4u to sun4v using flar Post 302680779 by psychocandy on Thursday 2nd of August 2012 10:19:36 AM
Old 08-02-2012
Thanks. Didnt try that. What I did try though was to run the install from CD again this time selecting upgrade.

Worked this time or at least booted ok. Only problem with this method is it removes all the OS patches not on the CD.

Final problem then was network interfaces. It seemed confused about these.
Ran sys-unconfig and sorted that out.

Now seems to working ok. Just got patches to re-install.

If I do again, might try your method also.

---------- Post updated at 09:19 AM ---------- Previous update was at 09:17 AM ----------

Quote:
Originally Posted by hicksd8
Cloning can be quite tricky. Often the disk devices which are restored are all wrong for the new platform. However, if it's the boot archive that the system is complaining about then update that first. Boot archive architecture wasn't used after Solaris 10u3 so I guess your version is 10u3 or earlier.

Boot from CD and mount your harddisk root filesystem under /a
then.....

Code:
 
bootadm update_archive -v -R /a

Then take the system down. On first attempted boot from hard disk ensure you use the -r switch to tell Solaris to reconfigure.

Code:
 
boot -r

Post the results of that. As I said above, we might need to rebuild all filesystem devices.

Hope that helps.
Solaris 10 05/09 is what we use....
 

9 More Discussions You Might Find Interesting

1. Solaris

Flar Images

I once found a document on the web describing how to build partition flar images instead of having just the one large one. I have managed this but am having problems extracting the subsequent flar archives. I ahve built the system from a jumpstart server and now need to add the program images etc... (0 Replies)
Discussion started by: 58fairlane
0 Replies

2. Solaris

Solaris sun4v - how do you determine physical RAM?

I have a Sun T5120, and I want to programmatically determine how much RAM it has. # uname -a SunOS myhost 5.10 Generic_141444-09 sun4v sparc SUNW,SPARC-Enterprise-T5120 The box has 64Gb; I tried prtdiag and prtconf, but they give me bogus info prtconf gives me: # prtconf |grep -i... (12 Replies)
Discussion started by: thomn8r
12 Replies

3. Solaris

flar on linux???

Hi admins, As we can create flash archieve on solaris with flarcreate command utility, so is there any utility like this on Linux to create flah archieves ?? (10 Replies)
Discussion started by: snchaudhari2
10 Replies

4. Solaris

"flar create" produces a tiny flar image of rpool

Hi, can someone help with the following? I got 1x146GB disk which is span by just one zfs rpool. When issue for example: as you can see in above output the flar is very small, just around 10KB rpool with all data sets has several GB so this can't be good image. This is on the Solaris 10... (3 Replies)
Discussion started by: TomSu
3 Replies

5. Solaris

system clone : sun4V --->sun4u ?

Hi, First sorry for my english ! I'm a newbie on Solaris and I'm trying to clone a SUN T5220 (sun4V platform) on SUN V240 (sun4u platform) using ufsdump/ufsrestore. Dumping all filesystem and restoring it on the V240 box and Make the disk bootable using installboot command. When... (21 Replies)
Discussion started by: manata
21 Replies

6. Solaris

Solaris 10 virtual disk (ramdisk) create for sun4v (T-2000 simulator) architecture

have been trying to create a 2 GB ramdisk (virtual) to run on my T-2000 simulator (Legion) which has sun4v architecture. I have a SPARC workstation which runs on sun4u architecture with Solaris 10. I have created a ramdisk image using dd command, newfs, then used ufsrestore to restore the... (3 Replies)
Discussion started by: Zam_1234
3 Replies

7. Solaris

How to scan for LUNs in SunOS sun4v sparc?

Hi everyone, We have the below sun Operating system, Now our storage team have Create a 500GB LUN for this server, How can i scan and mount the shared LUN ? Could anyone help me to resolve this issue. SunOS my_hostname.com 5.10 Generic_150400-09 sun4v sparc sun4v Update: -------- I... (9 Replies)
Discussion started by: babinlonston
9 Replies

8. Solaris

SunOS sun4v sparc ntp service in maintenance mode.

Hi experts, This is a production server. Host information's are below SunOS hostname_srv 5.10 Generic_150400-09 sun4v sparc sun4v Now issue with ntp service, This host have zone in it with 9 hosts, Every hosts have ntp service issue. While i check for the service status it's in... (3 Replies)
Discussion started by: babinlonston
3 Replies

9. Solaris

Using flar

Hi I have systems running UFS and ZFS file system type, and I need to create images of them ( in HP-UX ) we call it ignite, but in my case I dont have tape drives attached to the servers. I have read about flar archives, but the do I have to create those images in single user mode or using the... (8 Replies)
Discussion started by: fretagi
8 Replies
patchmedia(1M)						  System Administration Commands					    patchmedia(1M)

NAME
patchmedia - modify Solaris media with patches and packages SYNOPSIS
/usr/bin/patchmedia -d media-root [-v] [-o iso] [-l label] pkg_or_patch [pkg_or_patch ...] DESCRIPTION
The patchmedia utility takes a list of patches and packages as input and updates the install miniroot in media-root (the root directory of an on-disk image of a Solaris installation media) to include the specified patches and packages. These patches and packages are also placed in a subdirectory called DU under the Solaris install image. For example: media-root/Solaris_10/DU When booting a system from the updated media, the patches and packages will be part of the booted Solaris image. They will also be applied to the target system being installed at the end of the installation process. If -o is specified, a bootable ISO image is created in the file media.iso that contains the Solaris install media. The ISO image can then be burned onto a CD/DVD with utilities such as cdrw(1) or cdrecord(1). (The latter is not a SunOS man page.) OPTIONS
The following options are supported: -d media-root Top-level directory of on-disk image of Solaris installation media. This is option must be specified. -o iso Create a Solaris ISO image of media-root. -l label Label/volume name of the ISO image (if -o option is specified). If -o is not specified, the name of Solaris directory under media-root, for example, Solaris_10, will be used. -v Verbose. Multiple -v options increase verbosity. OPERANDS
The following operands are supported: pkg_or_patch [pkg_or_patch ...] One or more patches or packages (you can have both patches and packages in a single command) with which the Solaris installation media media-root will be updated. EXAMPLES
Example 1 Updating a Solaris Install Image with Patch and Package The following command updates the Solaris install image in s10u1 by adding patch 123456-07 and package SUNWfoo. # /usr/bin/patchmedia -d s10u1 SUNWfoo 123456-07 ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ |Interface Stability |Committed | +-----------------------------+-----------------------------+ SEE ALSO
cdrw(1), mkcd(1M), attributes(5) mkisofs(8), (/usr/share/man/man8/mkisofs.8), in the SUNWfsman package (not a SunOS man page) SunOS 5.11 29 Jul 2008 patchmedia(1M)
All times are GMT -4. The time now is 04:34 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy