Internal PCI X RAID Controller issue ? Post: 302679859

10 More Discussions You Might Find Interesting

1. SCO

driver needed for hp smartarry p200i sas raid controller

recently we have purchased hp proliant ml350 g5 server and configured raid 5 with hp smartarray p200i sas controller.but i could not found any sas raid controller hp smartarry p200i driver for sco unix 5.0.7 :(.i searched on hp support site,but no use.any one can help.

2. Solaris

RAID controller needed for SVM?

hi this may be a very stupid question, but im quite new to Solaris (gonna buid my first system, Solaris 10 on x86 system, connected to other windows systems in a home network) i wanna put a RAID 5 system in there to back up my other systems at home; iv read that its really so easy with SVM to...

3. Solaris

T5240 and Internal SAS RAID Configuration help

Dear Friends, I need to configure T5240 with Internal SAS RAID HBA(SG-XPCIESAS-R-INT-Z).. T5240 uses 8 hard disks... From the documents of RAID card I have found that I need to create a jump start server to include three packages SUNWaac, StorMan, SUNWgccruntime if Im using solaris10 5/08... ...

4. Red Hat

linux server with raid controller card

I am planning on building a fedora box with raid controller (database server). Is anybody done that ? also what kind of software do you need to backup and recover data.

5. Hardware

Problem with External Raid Controller.

Hi, We have a Sunfire 4150 with On-Board Internal Raid Controller connected to 4 X 146 GB SAS disks. This also has an External Raid Controller (Storagetek Eight-Port, External HBA Model SG-XPCIESAS-R-EXT-Z) connected to a JBOD array ( Storagetek XTA2530 ) which has 5 X 300 GB Hard disk. ...

6. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI...

7. Red Hat

RAID Configuration for IBM Serveraid-7k SCSI RAID Controller

Hello, I want to delete a RAID configuration an old server has. Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton? I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i...

8. Red Hat

Separate HDD test using RAID controller

Hello, I am using Red Hat 2.6.23.1 with RAID 6 controller (card). (When I use "cat /proc/partitions" I do not see the separate HDDs in the RAID, I see one drive for the RAID itself, as it is considered 1 large drive.) I used a "dd" check to test my RAID drive speed and found it was a bit slow,...

9. SCO

SCO OS 6 Driver for LSIL SAS1064E Raid Controller

Hi all, A client has an SCO OpenServer Server 6.0, that is running on an HP ProLiant Box and they lost the root password. Its equipped with a Doal-Core Intel Pentium Processor. They don't have any media or emergency disk anymore. I tried to boot with the CD Rom, then "Tools", then exit to...

10. Solaris

Sun Fire v440 Hard disk or controller broken? WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1)

Hi, I have a Sun Fire V440 server that fails to boot up correctly. A lot of services are not started and the sytems acts really slow to commands. During boot I can see the following Error: WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1): SCSI transport failed: reason 'reset': retrying...

LEARN ABOUT NETBSD

ciss

CISS(4) 						   BSD Kernel Interfaces Manual 						   CISS(4)

NAME

     ciss -- HP/Compaq Smart ARRAY 5/6 RAID controllers

SYNOPSIS

     ciss* at pci? function ?

DESCRIPTION

     The ciss driver provides support for the CISS interface implemented by fifth and later generations of the HP/Compaq Smart ARRAY family of
     controllers.

     The CISS interface is defined in the document entitled CISS Command Interface for SCSI-3 Support Open Specification, Version 1.04, Valence
     Number 1, Compaq Computer Corporation, 2000/11/27.

     This driver supports several Compaq and HP controllers implementing the CISS interface, including:

     o	 Compaq Smart Array 5300 version 1
     o	 Compaq Smart Array 5300 version 2
     o	 Compaq Smart Array 5i version 1
     o	 Compaq Smart Array 5i version 2
     o	 HP Smart Array 5312
     o	 HP Smart Array 6i
     o	 HP Smart Array 641
     o	 HP Smart Array 642
     o	 HP Smart Array 6400
     o	 HP Smart Array 6400 EM
     o	 HP Smart Array E200
     o	 HP Smart Array E200i
     o	 HP Smart Array P400
     o	 HP Smart Array P400i
     o	 HP Smart Array P600
     o	 HP Smart Array P800
     o	 HP Smart Array V100
     o	 HP Smart Array 1 through 13

     These controllers support RAID 0, RAID 1, RAID 5, JBOD, and superpositions of those configurations.

     Although the controllers are actual RAID controllers, the ciss driver makes them look just like SCSI controllers.	All RAID configuration
     must be done through the controllers' BIOSes.

     Hardware from previous generations of this product family may be supported by the cac(4) driver.

SEE ALSO

     bio(4), cac(4), intro(4), pci(4), scsi(4), sd(4)

HISTORY

     The ciss driver first appeared in NetBSD 3.1.

AUTHORS

     The ciss driver was written by Michael Shalayeff <mickey@openbsd.org>, and ported to NetBSD by Tonnerre Lombard <tonnerre@netbsd.org>.

BSD
								   May 28, 2008 							       BSD

10 More Discussions You Might Find Interesting

1. SCO

driver needed for hp smartarry p200i sas raid controller

Discussion started by: prakrithi

2. Solaris

RAID controller needed for SVM?

Discussion started by: Landser

3. Solaris

T5240 and Internal SAS RAID Configuration help

Discussion started by: nicktrix

4. Red Hat

linux server with raid controller card

Discussion started by: amir07