09-22-2011
Since you can dump/restore, you might be able to get this just by hex-editing. Change "AMER" to "ROW ". Note the space on the end, which makes the filesize not change. A newline would also work.
10 More Discussions You Might Find Interesting
1. Solaris
I need to install a raid HBA internal card on a T5240. The reason is I have
more drives and the current mother board controller does not support more
than 4 drives.
My question is I have raidctl set up on current drives. If I install new HBA
card do I have to delete current raidctl and... (3 Replies)
Discussion started by: photon
3 Replies
2. UNIX for Advanced & Expert Users
Hi,
I need to redirect internal internet requests to a auth client site siting on the gateway. Currently users that are authenticated to access the internet have there mac address listed in the FORWARD chain. All other users need to be redirected to a internal site for authentication.
Can... (1 Reply)
Discussion started by: mshindo
1 Replies
3. Solaris
Hi all
i would like to ask some suggests about my next job!
I have to install a new Sun Netra T5220, with an additional internal StorageTek SAS HBA Raid.
The problem come in if every disk is now controlled by the HBA, how can I install the OS?
No disk is being detected by the OS.
SAS card... (2 Replies)
Discussion started by: kakabobo
2 Replies
4. UNIX for Advanced & Expert Users
I have a V490 that has couple internal disks attached to the same dual-port HBA card that I'm planning attach to the SAN for additional storage.
Would I sacrifice performance if I use the same HBA?
Is it better to throw in a new HBA instead? (1 Reply)
Discussion started by: kiem
1 Replies
5. Ubuntu
I need some assistance formatting a compact flash card in Ubtunu.
I connect up the CF card through a USB reader. Ubuntu recognizes the reader usb device, but does not "mount" the CF card as a device.
The CF card was formatted in FAT32 format.
Any help would be greatly appreciated.... (3 Replies)
Discussion started by: genesis211
3 Replies
6. AIX
Around a month ago we suffered a prolonged power outage, due to circumstances the servers and storage arrays were still in use when the UPS dropped. One of the servers was running a flash copy on the database while batch processing had commenced. This is the only server that suffered any further... (2 Replies)
Discussion started by: gull04
2 Replies
7. Shell Programming and Scripting
Hi All,
I have a rather stange set of requirements that I'm hoping someone here could help me with. We receive a file that is actually a concatenation of 4 files (don't believe this would change, but ideally the solution would handle n files).
The super-file looks like:... (7 Replies)
Discussion started by: Leedor
7 Replies
8. SuSE
I have noticed that when I copy files to flash disk and in UI I see message copy completed in notification area on task bar, usually copy is not completed. So, if I eject the media I loose data.
It is very serious problem because may cause loss of valuable and even critical data.
Moreover, when... (2 Replies)
Discussion started by: netwalker
2 Replies
9. Shell Programming and Scripting
Hi
I have been trying to figure a way to copy a file, (a template), that has internal variables. Using the values as defined for those variables in another script.
So a file called x -
#! /bin/bash
D=aa.$X.bb
And file y
#! /bin/bash
X=6
while read line
do
eval echo... (5 Replies)
Discussion started by: steadyonabix
5 Replies
10. AIX
Hey guys, wondering if this is possible to accomplish.
PowerHA SystemMirror7.1 active/passive cluster. Restored a clustered system in test and upgraded to the latest version of PowerHA. Things are working great. However in the interest of time during cut over to the new system, I was hoping to... (4 Replies)
Discussion started by: j_aix
4 Replies
RESTOR(8) System Manager's Manual RESTOR(8)
NAME
restor - incremental file system restore
SYNOPSIS
restor key [ argument ... ]
DESCRIPTION
Restor is used to read magtapes dumped with the dump command. The key specifies what is to be done. Key is one of the characters rRxt
optionally combined with f.
f Use the first argument as the name of the tape instead of the default.
r or R The tape is read and loaded into the file system specified in argument. This should not be done lightly (see below). If the key is
R restor asks which tape of a multi volume set to start on. This allows restor to be interrupted and then restarted (an icheck -s
must be done before restarting ).
x Each file on the tape named by an argument is extracted. The file name has all `mount' prefixes removed; for example, /usr/bin/lpr
is named /bin/lpr on the tape. The file extracted is placed in a file with a numeric name supplied by restor (actually the inode
number). In order to keep the amount of tape read to a minimum, the following procedure is recommended:
Mount volume 1 of the set of dump tapes.
Type the restor command.
Restor will announce whether or not it found the files, give the number it will name the file, and rewind the tape.
It then asks you to `mount the desired tape volume'. Type the number of the volume you choose. On a multivolume dump the recom-
mended procedure is to mount the last through the first volume in that order. Restor checks to see if any of the files requested
are on the mounted tape (or a later tape, thus the reverse order) and doesn't read through the tape if no files are. If you are
working with a single volume dump or the number of files being restored is large, respond to the query with `1' and restor will read
the tapes in sequential order.
If you have a hierarchy to restore you can use dumpdir(8) to produce the list of names and a shell script to move the resulting
files to their homes.
t Print the date the tape was written and the date the file system was dumped from.
The r option should only be used to restore a complete dump tape onto a clear file system or to restore an incremental dump tape onto this.
Thus
mkfs /dev/hp0a 4807
restor r /dev/hp0a
is a typical sequence to restore a complete dump. Another restor can be done to get an incremental dump in on top of this.
A dump followed by a mkfs and a restor is used to change the size of a file system.
FILES
/dev/rmt1 default file name
rst* temporary files
SEE ALSO
dump(8), dumpdir(8), mkfs(8)
DIAGNOSTICS
There are various diagnostics involved with reading the tape and writing the disk. There are also diagnostics if the i-list or the free
list of the file system is not large enough to hold the dump.
If the dump extends over more than one tape, it may ask you to change tapes. Reply with a newline when the next tape has been mounted.
Dump tapes made before the new ondisc directory structure will be converted automatically by restor .
BUGS
There is redundant information on the tape that could be used in case of tape reading problems. Unfortunately, restor does't use it.
3rd Berkeley Distribution RESTOR(8)