Device eth0 issue Post: 302544749

5 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Eth err: "3c501 device eth0 does not seem to be present"

HI, When I do 'service network restart' , I am getting the following error. "3c501 device eth0 does not seem to be present, delaying initialization" Can any one suggest me the cause/solution for this? When I do 'lspci' it is showing the ehternet card as " Ethernet controller"Marvell...

2. AIX

How to find all device on p570 when need do device firmware upgrade?

I need upgrade firmware for the device of p570, when I go to IBM FIX download website, there are a lot of device of p570 listed. How can I know what device I have on my p570?

3. Solaris

Global device issue in sun cluster3.2

In my 2 node cluster (sun cluster3.2) running on x86 VMs. One of my nodes VM1 does not have the global devices populated due to which i cannot failover my file system to node VM1 , what could be the reason for this and how can i rectify it ? VM1:/>cd /dev/global -bash: cd: /dev/global: No...

4. Red Hat

Unable To Activate Ethernet Network Device in RHEL 5.5 - e100 device eth0 does not seem to be presen

Hi All, Could anyone please help to resolve the below problem. I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error. I spent 2 days for the above and go through with several suggestion found by googling. But no luck. ...

5. HP-UX

Failed to open tape device /dev/rmt/0mn:Device busy (errno = 16)

Hi, Unable to make tape backup, please help. /opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00 * Creating local directories for configuration files and archive. ======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery. (Mon...

LEARN ABOUT OPENSOLARIS

scconf_transp_adap_ibd

scconf_transp_adap_ibd(1M)				  System Administration Commands				scconf_transp_adap_ibd(1M)

NAME

       scconf_transp_adap_ibd - configure the InfiniBand (ibd) transport adapter

DESCRIPTION

       Note -

	 Beginning  with  the Sun Cluster 3.2 release, Sun Cluster software includes an object-oriented command set. Although Sun Cluster software
	 still supports the original command set, Sun Cluster procedural documentation uses only the object-oriented command set. For more  infor-
	 mation about the object-oriented command set, see the Intro(1CL) man page.

       You can configure ibd adapters as cluster transport adapters. These adapters can only be used with transport type dlpi.

       The ibd adapter connects to an InfiniBand transport switch. The connection is made through a transport cable.

       When  the  endpoints of the transport cable are configured by using scconf, scinstall, or other tools, you are asked to specify a port name
       on the transport switch. You can provide any port name, or accept the default, as long as the name is unique for the switch.

       The default is to set the port name to the node ID that hosts the adapter at the other end of the cable.

       There are no user-configurable properties for cluster transport adapters of this type.

SEE ALSO

       Intro(1CL), clinterconnect(1CL), clnode(1CL), scconf(1M), scconf_transp_jct_ibswitch(1M), scinstall(1M), ibd(7D)

Sun Cluster 3.2 						    4 May 2006						scconf_transp_adap_ibd(1M)