cfgmgr: 0514-621 WARNING Post: 302535849

8 More Discussions You Might Find Interesting

1. AIX

LPAR and CFGMGR

I have a P570 that for some reason is not allowing the P1-T6 NIC to be recognized. I have confirmed from the HMC that it is set for the LPAR, but when I do a cfgmgr, it won't recognize it. It though is recognizing the slot cards just fine which are P1-C3 for one shelf and P1-C3 of another shelf....

2. AIX

cfgmgr and hdisk number allocation

Hi - can anybody tell me what the default behaviour is for cfgmgr when it allocates hdisk numbers to newly discovered disks in the ODM ? I want to add a disk from our FAStT700 SAN disk array and import it on our p-series (AIX 5.2). Problem is we import and export Flashcopy devices fror scripted...

3. AIX

cfgmgr

Hi All, I remember my old senior mentor in AIX that cfgmgr should not be terminated on your console. Because if it's terminated in the middle, the odm might get corrupted. Is that true for AIX 5.x? Regards, itik

4. AIX

cfgmgr: Filesets missing

Hi all, I have a System i server with a couple of AIX LPARs. One of the LPARs owns a dual-channel scsi adapter to which I connect a tape library (IBM TS3100) and a DVD Drive. I had some problems to get the Tape Library detected but finally I got it: rmt0 Available 03-08-01-4,0 IBM 3580...

5. AIX

Dual port NIC, cfgmgr

OS: AIX 6.1 The host has a dual port NIC installed and when I went to run `cfgmgr -v` to configure it I got an error showing device packages are missing from the install: `cfgmgr -v` on 10.15.xx.xxx cfgmgr: 0514-621 WARNING: The following device packages are required for device support but...

6. AIX

cfgmgr in my aix box

Hi When I run cfgmgr -v in my aix box I get the below error : cfgmgr: 0514-621 WARNING: The following device packages are required for device support but are not currently installed. devices.loopback My oslevel is 6100-06-02-1044 Please assist. Please use and tags when...

7. AIX

0514-516 Device Configuration Database Lock Service

Hello guys, on one of our AIX VIO LPARs I can not remove hdiskpower devices, which seemed to presented to the VIO in an incorrect way and behaviour (not all paths can be seen, pseudo device name is unknown etc.) Therefor I decided to deattach the hdiskpower device from PowerPath controll by: ...

8. Post Here to Contact Site Administrators and Moderators

Cfgmgr Error

Hi, My AIX server able to detect the LUN's which is mapped from IBM v7k storage, And i allocated one more LUN from HP storage but it's appear two hdisk instead of one and it's showing incorrect LUN ID. SDDPCM driver already installed on this server. During cfgmgr, Im getting this message :...

LEARN ABOUT OSF1

sys_attrs_tc

sys_attrs_tc(5) 						File Formats Manual						   sys_attrs_tc(5)

NAME

       sys_attrs_tc - tc subsystem attributes

DESCRIPTION

       This reference page lists and describes attributes for the TURBOchannel Bus (tc) kernel subsystem. Refer to the sys_attrs(5) reference page
       for an introduction to the topic of kernel subsystem attributes.

       For this subsytem, users should modify only the following attribute and do so only for the purpose described. Any other visible	attributes
       cannot or should not be modified.

	      Enables (nonzero value) or disables (0) console messages that appear at boot time and runtime for use by device driver developers to
	      collect information about a driver configuration problem. A developer can set this attribute by using the sysconfig  or  sysconfigdb
	      utility.	See sysconfig(8), sysconfigdb(8), and cfgmgr(8) for more information on options for modifying attributes and reconfiguring
	      a kernel subsystem.

	      Default value: 0 (disabled)

SEE ALSO

       Commands: cfgmgr(8), sysconfig(8), sysconfigdb(8)

       Files: stanza(4), cfgmgr.auth(4), sysconfigtab(4)

       Others: sys_attrs(5)

       Writing TURBOchannel Device Drivers

																   sys_attrs_tc(5)