sys_attrs_tc(5) File Formats Manual sys_attrs_tc(5)NAME
sys_attrs_tc - tc subsystem attributes
DESCRIPTION
This reference page lists and describes attributes for the TURBOchannel Bus (tc) kernel subsystem. Refer to the sys_attrs(5) reference page
for an introduction to the topic of kernel subsystem attributes.
For this subsytem, users should modify only the following attribute and do so only for the purpose described. Any other visible attributes
cannot or should not be modified.
Enables (nonzero value) or disables (0) console messages that appear at boot time and runtime for use by device driver developers to
collect information about a driver configuration problem. A developer can set this attribute by using the sysconfig or sysconfigdb
utility. See sysconfig(8), sysconfigdb(8), and cfgmgr(8) for more information on options for modifying attributes and reconfiguring
a kernel subsystem.
Default value: 0 (disabled)
SEE ALSO
Commands: cfgmgr(8), sysconfig(8), sysconfigdb(8)
Files: stanza(4), cfgmgr.auth(4), sysconfigtab(4)
Others: sys_attrs(5)
Writing TURBOchannel Device Drivers
sys_attrs_tc(5)
Check Out this Related Man Page
cfgmgr(8) System Manager's Manual cfgmgr(8)NAME
cfgmgr - Configuration management server
SYNOPSIS
/sbin/cfgmgr
DESCRIPTION
The cfgmgr configuration management server works with the kernel load server (kloadsrv) daemon to manage the subsystems that are dynami-
cally configurable, loadable, or both. The cfgmgr server starts up automatically when a client (such as the sysconfig command) makes a con-
figuration management request. Examples of configuration management requests are requests to configure, reconfigure, query, or unconfig-
ure a subsystem.
The cfgmgr server allows query operations from any superuser (root login), local or remote. The superuser on the local system is also
allowed to configure, reconfigure, or unconfigure local kernel subsystems. Remote access to the kernel subsystem configuration is allowed
through the /etc/cfgmgr.auth file. System administrators working on hosts listed in that file can also configure, reconfigure, or uncon-
figure local kernel subsystems. If the /etc/cfgmgr.auth file does not exist or is empty, no remote users are allowed to configure, recon-
figure, or unconfigure local kernel subsystems.
If you use the sysconfig -v command, the cfgmgr server displays debugging information to the /dev/console screen. See the sysconfig(8) ref-
erence page for more information about the -v flag.
RELATED INFORMATION
Commands: sysconfig(8), sysconfigdb(8), kloadsrv(8)
Files: cfgmgr.auth(4) delim off
cfgmgr(8)
I having problem removing a page space....
1. When I list the page spaces available in the system, I am getting the following messages
0516-310 : Unable to find attribute state in the Device
Configuration Database. Execute synclvodm to attempt to
correct the database.... (4 Replies)
I seem to be having a driver issue installing a PCI SCSI card. Any ideas where I can track these down.. I can't seem to find them on the OS install disk. I'm using AIX 5.3.
cfgmgr: 0514-621 WARNING: The following device packages are required for
device support but are not currently... (7 Replies)
Hi - can anybody tell me what the default behaviour is for cfgmgr when it allocates hdisk numbers to newly discovered disks in the ODM ? I want to add a disk from our FAStT700 SAN disk array and import it on our p-series (AIX 5.2). Problem is we import and export Flashcopy devices fror scripted... (5 Replies)
Hi All,
I remember my old senior mentor in AIX that cfgmgr should not be terminated on your console. Because if it's terminated in the middle, the odm might get corrupted.
Is that true for AIX 5.x?
Regards,
itik (1 Reply)
When install Oracle 10, for linux, I need input entries in /etc/sysconfig/rawdevices . However, for AIX, do I need input somthing in /etc/sysconfig/rawdevices ? (1 Reply)
Hi all,
I have a System i server with a couple of AIX LPARs.
One of the LPARs owns a dual-channel scsi adapter to which I connect a tape library (IBM TS3100) and a DVD Drive.
I had some problems to get the Tape Library detected but finally I got it:
rmt0 Available 03-08-01-4,0 IBM 3580... (1 Reply)
OS: AIX 6.1
The host has a dual port NIC installed and when I went to run `cfgmgr -v` to configure it I got an error showing device packages are missing from the install:
`cfgmgr -v` on 10.15.xx.xxx
cfgmgr: 0514-621 WARNING: The following device packages are required for device support but... (3 Replies)
May I know how can I add a new SSA pdisk into array and become usable hdisk? I have inserted a 36GB SSA disk into enclosure and done the "cfgmgr" and I can see it already been regconized as pdisk47.
I would like to make it a system disk in order for me to add to my volume group. Please let me... (3 Replies)
Hi
When I run cfgmgr -v in my aix box I get the below error :
cfgmgr: 0514-621 WARNING: The following device packages are required for
device support but are not currently installed.
devices.loopback
My oslevel is 6100-06-02-1044
Please assist.
Please use and tags when... (3 Replies)
Dear all
i have a sun SL500 tape library attached to my AIX box while issue the command cfgmgr i have the below issue
test>cfgmgr
cfgmgr: 0514-621 WARNING: The following device packages are required for
device support but are not currently installed.
devices.fcp.changer
please... (3 Replies)
Hi,
The scenario is like this:
1.We needed to assign two hdisks to an LPAR
2.SAN team gives us two ldevs
3.One of our VIO is hanging on cfgmgr operation
4. We ran cfgmgr on the smooth VIO. Got the disks and assigned the disks from there to the LPAR.(By passed the other VIO as in didnt run... (11 Replies)
Hi.
I have 2 libraries (overland + data domain).
My AIX 7.1 detect all "rmt" of the overland but none of the data domain.
I have the Atape driver 12.3.9.
During cfgmgr, I have this message :
cfgmgr: 0514-621 WARNING: The following device packages are required for
device support... (2 Replies)
Hi,
From the man page, cfgmgr configures devices and optionally installs device software by running the programs specified in the Configuration Rules object class and it is not dependent on platform .
Are there any fundamental differences impacting the speed of cfgmgr on a stand-alone and... (5 Replies)
I have an Oracle Linux 7.1 vsphere host built. It's be preconfigured with our security configurations.
What I would like to do is unconfigure this host. Then set the host to do firstboot --reconfigure.
how do I do that using /etc/sysconfig/firstboot?
I've tried setting
... (10 Replies)
On a fresh bare metal (no LPARs) install of AIX 7.2 running cfgmgr is returning..
# cfgmgr
Method error (/usr/lib/methods/cfgstorfworkcom -l sfwcomm2 ):
0514-040 Error initializing a device into the kernel.
Method error (/usr/lib/methods/cfgstorfworkcom -l sfwcomm3 ):
... (1 Reply)