Sponsored Content
Operating Systems AIX How to restore rootvg archive after AIX 6.1 crash Post 302523785 by dukessd on Thursday 19th of May 2011 07:31:17 PM
Old 05-19-2011
Hi,

It sounds like you were very lucky with your recovery but I would be both dubious of relying on this for a production restore and also about how valid the recovery is on your test box for further development on this system.

For the ISO backup you'll find all sorts of problems like the 2GB file limit on VIOS install media meaning the image is split into more than one file, let alone more than one ISO although I suspect it will just create a second ISO for the remaining data. Good luck with that one, please let us know what you find out.

For your bootp issue you'll find VIOS and AIX installs and install media are quite different.
AIX installs from scratch or base filesets with a full base install process but VIOS media actually contains a backup or mksysb that is restored during the VIOS install, much like a mksysb migration of AIX and I suspect the linux bootp VIOS install relies on this.

You could probably create a generic AIX mksysb and use that to deploy AIX in the method suggested but I don't think it will work with AIX install media because the two installs are so completely different.

HTH and good luck, please keep us updated on your progress.
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Selective restore from a cpio tape archive

Hi, I use following command to restore data from my cpio tape archive: $cpio -icvd < /dev/rct0 But this'll restore all tape contents to the current path, what if I want only selected files from the tape, suppose I want /home/compdir/home2/Rev83/data/PL/01/*.* files to be restored... (8 Replies)
Discussion started by: tayyabq8
8 Replies

2. Solaris

Can I restore from a flash archive without re-entering the basic sys info?

Hi I would like to be able to take adhoc backups of my systems using flash archive - flarcreate - and then restore from them to the same system without having to enter the basic configuration again when I boot from the Solaris CD. So, I'd like to be able to create a flar archive ... (1 Reply)
Discussion started by: emjs
1 Replies

3. UNIX for Advanced & Expert Users

Archive and Restore

Can someone please let me have a nice shell script to: 1) Identify all folders/sub-folders/files older than 365 days with the exception of one or two folders e.g. named - "common" or "test" 2) Archive (1) above for example in a TAR file 3) Delete all in (1) above and that's it... 4) In case... (1 Reply)
Discussion started by: mahmud
1 Replies

4. AIX

AIX Rootvg mirror and sysdumplv

Guys, In my AIX 6.1 box the rootvg was on hdisk2, I tried to migrated it to hdisk0 Added hisk0 to rootvg , mirrored rootvg and changed bootlist and and sucessfully rebooted from hdisk0 Now I tried to remove the hdisk2 from rootvg so breaked mirror -bash-3.00# unmirrorvg rootvg hdisk2... (3 Replies)
Discussion started by: kkeng808
3 Replies

5. HP-UX

restore data after system crash

Hi all, I have a server running HP-UX 11i V1 (11.11). We had a problem with the system disk which cannot boot and the recovery with the CD failed too. the only solution was to re-install the system on a new disk. The problem now is to get access to the data which are on other disks, not... (2 Replies)
Discussion started by: aribault
2 Replies

6. AIX

Erase AIX rootvg system disk

Hello all, I need help for erasing IBM P5 machine running AIX 5.3. I have 2 system disks (Hardware mirror) and i'm looking for a way like a LIVE CD bootable CD so I can boot with the cd and then format the system disks with a "secure erase" software. (7 Replies)
Discussion started by: kobi gabai
7 Replies

7. UNIX for Dummies Questions & Answers

Unable to restore cpio archive to a directory

Hello Every one, I want to back up all passwd files to /xyz/passfiles.cpio and Then restore them to /abc directory. Here is what I wrote: find / -name passwd | cpio -oc > /tmp/passwd.cpio and to restore cd abc cpio -ium < /tmp/passwd.cpio I can not find the files restored to /abc... (2 Replies)
Discussion started by: drdigital_m
2 Replies

8. Solaris

Restore from Flash Archive on local filesystem

I am doing a practice restore using a test UNIX(Solaris) system, and a SCSI Hard Drive whose slice 5 contains the Flash Archive file that I need to restore from. The test system is offline( no network ) and does not have external devices, such as tape drive. My goal is to somehow restore the... (9 Replies)
Discussion started by: the.gooch
9 Replies

9. AIX

Using restorevgfiles to restore entire directory from rootvg problems

I am trying to restore a specific directory and all sub-directories therein using a rootvg tape. I am using the following command to make the backup: mksysb -m -i -v /dev/rmt0 However, I am getting the following result: tctl status rmt0 Available 04-08-00-0,0 LVD SCSI 4mm Tape Drive... (10 Replies)
Discussion started by: herot
10 Replies

10. AIX

AIX break rootvg mirror from system down

Hello, aix 5.2, mirrored rootvg on hdisk0 and hdisk1. hdisk0 is dead. I can boot to cd, into sms, into maintenance mode. I can fsck all the various partitions on hdisk1 (the hd4 hd2 hd3, etc...) all is fine. But without the hdisk0 part of the mirror I cannot get the system to boot. ystem hangs on... (6 Replies)
Discussion started by: sshapiro
6 Replies
mkcd(1M)						  System Administration Commands						  mkcd(1M)

NAME
mkcd - create bootable Solaris ISO image SYNOPSIS
/usr/bin/mkcd -v [-l label] media-root iso DESCRIPTION
The mkcd utility takes media-root (the root of an on-disk Solaris install media) as input and creates a bootable Solaris ISO image in the file iso, using mkisofs(8). The file can then be burned onto a CD/DVD with utilities such as cdrw(1) or cdrecord(1). (Neither mkisofs(8) nor cdrecord(1) are SunOS man pages.) Caution - The directory tree media-root must contain the file boot/grub/stage2_eltorito, which will be written to the media boot sectors. This file will be modified with some boot information, thus it must be writable. If necessary, first save a copy prior to running this utility. OPTIONS
The following options are supported: -l label Sets label as the label/volume name of the ISO image. -v Verbose. Multiple -v options increase verbosity. OPERANDS
The following operands are supported: media-root Top-level directory of an on-disk Solaris install media. iso Name of the output file which will contain the resulting ISO image. EXAMPLES
Example 1 Creating an ISO Image and Burning a CD/DVD The following commands create an ISO image from the content of s10u1 and burn the image to a CD/DVD. # /usr/bin/mkcd s10u1 s10u1.iso # /usr/bin/cdrw -i s10u1.iso ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ |Interface Stability |Committed | +-----------------------------+-----------------------------+ SEE ALSO
cdrw(1), attributes(5) mkisofs(8), (/usr/share/man/man8/mkisofs.8), in the SUNWfsman package (not a SunOS man page) SunOS 5.11 25 Jul 2008 mkcd(1M)
All times are GMT -4. The time now is 11:24 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy