11-02-2010
there can be a difference in the settings... provide the output of "eeprom" of both machines.
10 More Discussions You Might Find Interesting
1. Solaris
Hi,
I have t5120 sparc and I have 2 146 G drives in the system. I will be installing solaris 10 and also want the system mirrored using Hardware RAID "1"
The System did come preinstalled as it comes from sun. I did not do much on it.
I booted system using boot cdrom -s
gave format... (6 Replies)
Discussion started by: upengan78
6 Replies
2. Solaris
Hi,
I am using 3 t5120 sparc systems, OS solaris 10.
I am confused by update manager behaviour and sun support.
Sun support guy, tells me install patch : 136932-09 (#136932-09: Hardware/PROM: SPARC Enterprise T5120 & T5220 Sun System Firmware with LDOMS support)
When I checked... (4 Replies)
Discussion started by: upengan78
4 Replies
3. Solaris
Hi,
I have problem creating hardware raid on T5120 with 4 disks. After the hardware raid 1 created, then I used the raidctl -l c1t0d0 and raidctl -l c1t2d0
the output of volume c1t0d0 contain disk 0.0.0 0.1.0, also the volume c1t2d0 contain disk 0.0.0 0.1.0 and should be 0.2.0 0.3.0
so I... (15 Replies)
Discussion started by: netlink
15 Replies
4. Solaris
Good Day,
We have bought Sun Sparc Enterprise T5120 with pre-installed Solaris 10 Sparc
But i need on this server Solaris 9. I have inserted in to DVD-rom (USB DVD-rom) with Solaris 9 for Sparc.
Then log into shell and type: reboot -- cdrom.
System rebooted and i have this message:
... (3 Replies)
Discussion started by: A.Shalin
3 Replies
5. Solaris
hi all, i have a problem with a sun server, since a while the root password has been lost and now that we need to give maintenance to the services hosted in it, we cant access it, i tried a method to change it by booting from cd but i cant direct the server to boot from the cd. (The server is on... (3 Replies)
Discussion started by: darklilith
3 Replies
6. Solaris
greetings.
im a very new user to solaris (and to servers for that matter) and i need to conect to a t5120 sun server, i tried using the SER-MGT port on the back of the server, then to a rj-45/db-9 adaptor, and to a serial-usb adaptor (my laptop doesn't have a com port).
when i try to conect with... (2 Replies)
Discussion started by: darklilith
2 Replies
7. Solaris
Hi everyone
I've just purchased a Sun T5120 server with 2 internal disks. I've configured hardware RAID (mirror) and as a result the device tree in Solaris only contains 1 hard drive.
My question is, how would I know when one of the drives become faulty?
Thanks (2 Replies)
Discussion started by: soliberus
2 Replies
8. Solaris
I have a T5120 server and we found out on a security scan that the web interface for the ILOM is enabled. I have been trying to find this information in the wonderful documentation but have not been successful.
Does anyone know if you need the http/https enabled on the ILOM for the serial... (4 Replies)
Discussion started by: rkruck
4 Replies
9. Solaris
Any idea why this Panic happened?
Solaris10 Sparc T5120 panic during iscsi command, here is the panic log in the message :
Mar 19 04:40:47 xavi-t5120c-solaris10u9-sparc genunix: /scsi_vhci/ssd@g00173800fdff0004 (ssd60) offline
Mar 19 04:40:47 xavi-t5120c-solaris10u9-sparc genunix: ... (4 Replies)
Discussion started by: shaybery
4 Replies
10. Solaris
Anyone run into an issue where a new Solaris 11.1 install on a t5120 will only have access to 2g ram? The system has 16g installed and fmadm isn't reporting any problems. Here's some output that may help.
Oh, and this is a brand new operating system install, there's no zones, ldoms, rcap or the... (6 Replies)
Discussion started by: DustinT
6 Replies
RWHO(1) BSD General Commands Manual RWHO(1)
NAME
rwho -- who is logged in on local machines
SYNOPSIS
rwho [-a]
DESCRIPTION
The rwho command produces output similar to who, but for all machines on the local network. If no report has been received from a machine
for 11 minutes then rwho assumes the machine is down, and does not report users last known to be logged into that machine.
If a users hasn't typed to the system for a minute or more, then rwho reports this idle time. If a user hasn't typed to the system for an
hour or more, then the user will be omitted from the output of rwho unless the -a flag is given.
FILES
/var/spool/rwho/whod.* information about other machines
SEE ALSO
finger(1), rup(1), ruptime(1), rusers(1), who(1), rwhod(8)
HISTORY
The rwho command appeared in 4.3BSD.
BUGS
This is unwieldy when the number of machines on the local net is large.
Linux NetKit (0.17) August 15, 1999 Linux NetKit (0.17)