Hardware Raid

9 More Discussions You Might Find Interesting

1. Solaris

I don't understood why on SPARC-Platforms have not present RAID-Controller ? Sorry for my bad english, but it's crazy always setup software RAID !!! I whanna Hardware RAID and when i can find solution ?

2. Solaris

how to hardware RAID 1 on T5120

Hi, I have t5120 sparc and I have 2 146 G drives in the system. I will be installing solaris 10 and also want the system mirrored using Hardware RAID "1" The System did come preinstalled as it comes from sun. I did not do much on it. I booted system using boot cdrom -s gave format...

3. Solaris

T2000 Hardware RAID

Hi, I have a root with hardware RAID on c0t0d0 and c0t2d0. I would like to set the boot device sequence in OBP for both hdds. I have checked in ls -l /dev/rdsk/ for the path of c0t2d0 but it does not exist. Can anyone shed some lights on this? AVAILABLE DISK SELECTIONS: 0....

4. UNIX for Dummies Questions & Answers

RAID software vs hardware RAID

Hi Can someone tell me what are the differences between software and hardware raid ? thx for help.

5. Hardware

Sun T3-1 hardware RAID

Hi all I've just received my T3-1. It has 8 disks and I would like to configure RAID1 on the disks. The Sun documentation states that you can either use the OpenBoot PROMP utility called Fcode or you can use software via the Solaris OS. The documentation doesn't make it clear if: 1. The...

6. Solaris

Software RAID on top of Hardware RAID

Server Model: T5120 with 146G x4 disks. OS: Solaris 10 - installed on c1t0d0. Plan to use software raid (veritas volume mgr) on c1t2d0 disk. After format and label the disk, still not able to detect using vxdiskadm. Question: Should I remove the hardware raid on c1t2d0 first? My...

7. Solaris

Liveupgrade with RAID

I am not a Solaris maven. I've read and read and read the docs, and I just don't get it, so I'm here to ask for clarification. I have a T2000/Solaris10u8. It has three drives. Drive 0 and Drive 1 are mirrored with metaxxxxx. Drive 2 has some untouchable data. It hasn't been treated nicely...

8. Solaris

Hardware raid patching

Dear All , we have hardware raid 1 implemented on Solaris Disks. We need to patch the Servers. Kindly let me know how to patch hardware raid implemented Servers. Thanks... Rj

9. Solaris

Hardware RAID using three disks

Dear All , Pl find the below command , # raidctl -l Controller: 1 Volume:c1t0d0 Disk: 0.0.0 Disk: 0.1.0 Disk: 0.3.0 # raidctl -l c1t0d0 Volume Size Stripe Status Cache RAID Sub Size ...

LEARN ABOUT NETBSD

mvsata

MVSATA(4)						   BSD Kernel Interfaces Manual 						 MVSATA(4)

NAME

     mvsata -- Marvell Hercules-I and Hercules-II SATA controllers driver

SYNOPSIS

     mvsata* at pci? dev ? function ?

DESCRIPTION

     The mvsata driver supports the Marvell Hercules-I and Hercules-II family of SATA controllers, interfacing the hardware with the ata(4) and
     atapi(4) subsystems.

     The following controllers are supported by the mvsata driver:

	   Adaptec RAID 1420SA
	   Adaptec RAID 1430SA
	   Marvell 88SX50xx Hercules-I
	   Marvell 88SX60xx Hercules-II
	   Marvell 88SX70xx Hercules-II
	   Triones Technologies RocketRAID 2310 RAID card

     The 88SX60xx and later support Native Command Queuing.  The 88SX70xx also supports ATAPI.

SEE ALSO

     ata(4), atapi(4), pci(4), wd(4)

HISTORY

     The mvsata driver first appeared in NetBSD 6.0.

AUTHORS

     The mvsata driver was written by KIYOHARA Takashi <kiyohara@kk.iij4u.or.jp>.

BUGS

     SATA Native Command Queuing is not yet supported.
     Device hot swapping is not yet supported.
     ATAPI is not yet tested.
     Marvell's Software RAID is not yet supported by the
	     ataraid(4) driver.  raid(4) can be used instead.

BSD
								   July 19, 2009							       BSD