07-10-2010
Ultra 5 will not boot from DVD ROM :(
Hi,
I just got a new Ultra 5 and replaced the CD-ROM with an LG DVD-ROM (approved and listed in Sun HCL). Got the DVD-ROM installed to install Solaris 10. Im just learning and new to Solaris installation.
When I insert a Solaris 10 DVD I see that it gets mounted and File Manager opens and displays the ISO files.
However, when I get into OBP to try to install the via the DVD I get bad magic number and checksum errors (boot cdrom -install give same errors) -
ok boot cdrom -s
Boot device: /pci@1f, 0/pci@1,1/ide@3/cdrom@2,0:f File and args: -s
Bad magic number in disk label
Can't open disk label package
Can't open boot device
Bad checksum in disklabel
Can't open disk label package
Boot device: net File and args:
Network Link setup failed
Please Check Cable and Try AAgain.
Timeout waiting for ARP/RARP packet.
ok
Also here is the output of my probe-ide
ok probe-ide
Device 0 ( Primary Master )
ATA Model : WDDC WD136AA
Device 1 ( Primary Slave )
ATA Model: Maxtor 52049H4
Device 2 ( Secondary Master )
Removable ATAPI Model: HL-DT-STDVD-RAM GH22LP20
Device 3 ( Seconday Slave )
Not Present
ok
Could some one please let me know what could be wrong and step by step procedures to fix this?
Please help!
Thanks!
Ramesh.
10 More Discussions You Might Find Interesting
1. Solaris
Netra T1 running Solaris 2.6 with following DVD installed:
c0t6d0 Soft Errors: 131 Hard Errors: 0 Transport Errors: 0
Vendor: TOSHIBA Product: DVD-ROM SD-M1401 Revision: 1007
I know the cdrw command isn't in Solaris until version 8 and DVD is suppose to be udfs (not supported... (3 Replies)
Discussion started by: RTM
3 Replies
2. Solaris
Hi there
In our Data centre we have a mixture of SPARCS running from v100 and ultra10's to v800 and v1250 boxes we also have a large amount of x86 X2100 and X4100 boxes
I am looking to purchase an external DVD-ROM drive that we can plug into the back of any of the boxes if we need to (I... (2 Replies)
Discussion started by: hcclnoodles
2 Replies
3. Solaris
Hello,
We have a Sun Enterprise 4500. I checked the product manual from SUN's site and it says it has a DVD-ROM.
I downloaded Solaris 10 DVD image and burned it to a DVD and put it into the box but I don't see anyting in the /cdrom folder.
Is there a command I can use to confirm if I have... (5 Replies)
Discussion started by: zafyil
5 Replies
4. Solaris
Hi All,
I just bought the SUN x2200m2. After I installed Solaris, I cannot see the CD/DVD ROM. I cannot mount the CD/DVD ROM since it says already mounted. When I try unmount it I get message that CD/DVD is not mounted. :(
Any idea please.
Thx (4 Replies)
Discussion started by: afakhim
4 Replies
5. HP-UX
Class I H/W Path Driver S/W State H/W Type Description
============================================================================
disk 0 0/0/2/0.0.0.0 sdisk CLAIMED DEVICE EAC DVD-ROM DW-224EV
/dev/dsk/c0t0d0 ... (1 Reply)
Discussion started by: alert0919
1 Replies
6. Solaris
Hello,
I need to replace a cd rom drive with a dvd rom drive in a SunFire v120 running Solaris 8. My objective is to install Solaris 10 from dvd disc. Downloading Solaris 10 cd discs is not an option since I am in Baghdad, Iraq and connection speeds are horrible. So far, all I can get is power to... (9 Replies)
Discussion started by: 555
9 Replies
7. Solaris
Hi All,
I'm a total noob when it comes to troubleshooting Sun hardware issues, however, I've been tasked with just a task. How can I verify if the DVD rom is working in a Sun system? We've put in the dvd, but can't do anything. This is from command line.
Thanks.
---------- Post updated at... (1 Reply)
Discussion started by: bbbngowc
1 Replies
8. Solaris
Is there anyway to get a USB DVD ROM to work on a V210/V240/V440 SPARC systems for initial installation? I'm drawing a blank and I can't seem to find any documentation on this. (3 Replies)
Discussion started by: adelsin
3 Replies
9. AIX
Dear Friends
could u pls help me on this .
how to mount DVD rom in command line in aix?
THanks
DD (4 Replies)
Discussion started by: ded325
4 Replies
10. Hardware
Here is my conundrum . I am unable to access my cd or dvd
after I supposedly alter the BIOS setting to enable a "Live"
CD or DVD to be used.
Would ,changing the Hard Drive or Motherboard remedy the situation.
Thanking you,
katosan:wall::wall: (2 Replies)
Discussion started by: katosan
2 Replies
LEARN ABOUT OPENSOLARIS
mkcd
mkcd(1M) System Administration Commands mkcd(1M)
NAME
mkcd - create bootable Solaris ISO image
SYNOPSIS
/usr/bin/mkcd -v [-l label] media-root iso
DESCRIPTION
The mkcd utility takes media-root (the root of an on-disk Solaris install media) as input and creates a bootable Solaris ISO image in the
file iso, using mkisofs(8). The file can then be burned onto a CD/DVD with utilities such as cdrw(1) or cdrecord(1). (Neither mkisofs(8)
nor cdrecord(1) are SunOS man pages.)
Caution -
The directory tree media-root must contain the file boot/grub/stage2_eltorito, which will be written to the media boot sectors. This file
will be modified with some boot information, thus it must be writable. If necessary, first save a copy prior to running this utility.
OPTIONS
The following options are supported:
-l label
Sets label as the label/volume name of the ISO image.
-v
Verbose. Multiple -v options increase verbosity.
OPERANDS
The following operands are supported:
media-root
Top-level directory of an on-disk Solaris install media.
iso
Name of the output file which will contain the resulting ISO image.
EXAMPLES
Example 1 Creating an ISO Image and Burning a CD/DVD
The following commands create an ISO image from the content of s10u1 and burn the image to a CD/DVD.
# /usr/bin/mkcd s10u1 s10u1.iso
# /usr/bin/cdrw -i s10u1.iso
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Committed |
+-----------------------------+-----------------------------+
SEE ALSO
cdrw(1), attributes(5)
mkisofs(8), (/usr/share/man/man8/mkisofs.8), in the SUNWfsman package (not a SunOS man page)
SunOS 5.11 25 Jul 2008 mkcd(1M)