Telnet to a serial port Post: 302420827

Sponsored Content

Special Forums Windows & DOS: Issues & Discussions Telnet to a serial port Post 302420827 by mghis on Wednesday 12th of May 2010 01:44:40 PM

05-12-2010

Registered User

I think I understood.
I'm buying a RS232 Null Modem cable.
In ubuntu 9.10 there is not /etc/inittab. Init reads the command to execute by files in the /etc/init directory. However i think i will resolve.

Thank you again for your instructions!

Ps: If i'll have problems, i'll edit this post. Thanks again!
--------EDIT---------
I have a problem! In the DOS kermit client i don't see login prompt and no activity!
Here is my configuration. In both computers I have one serial port, db9 (9 pins). I connected the 2 pc with the null modem cable. I started kermit on the DOS pc. I setted no parity (set parity none). I setted 1 stop bit (set stop-bit 1). I setted 8 data bit (set term byte 8). port com1 (set port com1). baud 9600 (set baud 9600). set flow-control xonn/xoff. And finally i connected (connect).
In the shell of desktop ubuntu pc i typed: 'sudo /sbin/getty -8L 9600 /dev/ttyS0 vt320'
(vt320 is the model of emulated terminal). The command just hangs... And i dont see any login prompt on the dos pc. No garbage, nothing at all.

I tried a lot of times, but i'm not an expert... How can I do?

Thanks for any answer!

Last edited by mghis; 05-13-2010 at 03:04 PM..

mghis

View Public Profile for mghis

Find all posts by mghis

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

serial port configuration

I am having trouble with a device connected through a serial port on my sun workstation ( I am running solaris 7). The seriel device works on an identical workstation running the same o/s version but when I move it to the initial workstation it doesn't work. I am using an rs232 serial cable and...

2. Solaris

disabled telnet now need port 23 or port 22

we disabled telnet on solaris 9 via previous a thread. We use CMS (call management system) supervisor which used port 23 (telnet). We cannot use telnet via local directive and it was shut down as stated when we shut down telnet in the inetd file. I cannot now log into the CMS box since port 23 is...

3. Solaris

Serial Port Datalogger

Hi, I'm using Solaris workstation with 5.4 OS. I was wondering if there's a way that I could log the data incoming and outgoing on a certain serial port. Thanks in Advance!

4. UNIX for Dummies Questions & Answers

Serial port redirector

I need make serial data from virtual serial ports available on a TCP/IP network. For communications with hardware COM ports to send and receive serial data over a local network or the Internet. Example: POSIX machine (/dev/ttyS0) <--- TCP/IP ---> Windows machine COM1 Please help! I try use...

5. AIX

Serial port in AIX

Hi, How can i configure my modem in AIX thru serial port (sa0-->tty0) I have two port serial card configured as sa0 I created tty1 which port is tty0 and which port is tty1 how can i know??

6. Ubuntu

Ubuntu 9.04 Serial application to telnet to serial device

Hello! I am working on an application which reads environmental instruments which have serial ports. The application requires a serial port to be present to talk to the device (i.e. /dev/ttyS0 ). In some instances the environmental devices will be 100's of yards away from the computer, so a...

7. Shell Programming and Scripting

Need help with serial port

Hi, I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and...

8. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

9. IP Networking

telnet for port 5433 is not working while it works for port 22

Hi, I am trying to set up a dev environment and I have Ubuntu server (10.16.1.92) and a CentOS VM (10.16.3.235) on this. On the CentOS I have a program running on port 5433. Now my problem is that I am unable to telnet this port from another Windows server whereas I can telnet port 22 from...

10. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

LEARN ABOUT DEBIAN

bt-serial

bt-serial(1)							    bluez-tools 						      bt-serial(1)

NAME

       bt-serial - a bluetooth serial manager

SYNOPSIS

       bt-serial [OPTION...]

       Help Options:
	 -h, --help

       Application Options:
	 -a, --adapter=<name|mac>
	 -c, --connect <name|mac> <pattern>
	 -d, --disconnect <name|mac> <tty_device>

DESCRIPTION

       This utility is used to manage serial service connections.

OPTIONS

       -h, --help
	   Show help

       -a, --adapter <name|mac>
	   Specify adapter to use by his Name or MAC address
	   (if this option does not defined - default adapter used)

       -c, --connect <name|mac> <pattern>
	   Connects to a specific RFCOMM based service on a
	   remote device and then creates a RFCOMM TTY
	   device for it; `pattern` is a profile short name (spp, dun),
	   RFCOMM channel (1-30)

       -d, --disconnect <name|mac> <tty_device>
	   Disconnect a RFCOMM TTY device that has been created

AUTHOR

       Alexander Orlenko <zxteam@gmail.com>.

SEE ALSO

       bt-adapter(1) bt-agent(1) bt-audio(1) bt-device(1) bt-input(1) bt-monitor(1) bt-network(1)

								    2010-08-12							      bt-serial(1)

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

serial port configuration

Discussion started by: Henrik

2. Solaris

disabled telnet now need port 23 or port 22

Discussion started by: panzerkw

3. Solaris

Serial Port Datalogger

Discussion started by: uryuu

4. UNIX for Dummies Questions & Answers

Serial port redirector

Discussion started by: steel98