You probably have the adapter active on your other vio server and that is why it fails ?
At least your 'status down' would speak for this ?
On my primary SEA VIO Server I see:
and here what you do works for me, and on backup SEA VIO Server at the same time:
it fails for me too - so I would assume this is normal behaviour - an adapter that is down just doesnt provide the information. Does it work when you bring down your other vio server?
Hello HP-UX Gurus,
I am having issues trying to start an x-session via eXceed 7.1.
When I bring up eXceed via XDMCP Braodcast I see the host name and IP Address but when I try to connect the X window does not come up.
I made the modification to the following file “/etc/dt/config/Xaccess”... (2 Replies)
Hi friends
recently i have installed SXDE 1/08 into my machine,and i installed wifi driver also
its working fine,Recently i was unable to connect to Internet,I have not changed any configurations and any installations,thing is that i got my iwk0 interface is UP and IP address also and i can... (6 Replies)
I shall explain the situation that I am facing to the best extent possible. I require some help, as this situation is an urgent one.
I am trying to automate sending data from one AIX machine to another. A script runs that tries to push data received from an upstream application to another AIX... (7 Replies)
Hi,
I'm trying to connect from an HP-UX with SSH2 client(ssh2 3.1.2 on hppa1.1-hp-hpux11.00) to an SSH2 server on a VxWorks system. The SSH connection is failing with the below connection logs:
> /usr/local/bin/ssh2 -v -l testuser 10.10.10.10
debug: Ssh2/ssh2.c:1391: Using file... (4 Replies)
Hello all,
Here is the explanation of my problem:
I have a cronjob that connects to a NAS to do backups from my laptop to this NAS device.
The script that I wrote does check if there is a host (the NAS) responding on 192.168.1.10 and tries to connect to it with the following command:
mount -v... (3 Replies)
Hi All,
Could anyone please help to resolve the below problem.
I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error.
I spent 2 days for the above and go through with several suggestion found by googling. But no luck.
... (0 Replies)
I have managed to install Broadcom BCM43228 Wireless adapter on a laptop running CentOS 5.9 using instructions at:
wiki.centos.org/HowTos/Laptops/Wireless/Broadcom
I had the problem "Error for wireless request "Set Encode" (8B2A): SET failed on device... mentioned on the same page and solved... (0 Replies)
Hi all
unixware 7.1.3 I'm afraid ! I connected a usb tape drive and it was automatically recognised in the device list (sdiconfig -l) and created devices in /dev/rmt (ctape1 etc.). I could successfully read and write to the device.
Then unplugged the usb cable and plugged it back in again... (0 Replies)
Hello,
I just installed CentOS 7 (Server with GUI) and guess what I could install Virtual Box Guest additions without installing any extra package/software which is great news !
Now bad news or not so great news.
My Host OS is Windows 10, Virtual Box is the virtualization software. CentOS7-1... (0 Replies)
After following the instructions given by resident moderator Bakunin over here
https://www.unix.com/aix/279862-installed-memory-32gb-but-shows-only-16gb.html
#1 Connect to ASMI
#2 Configure the deconfigured memory
#3 Start the machine
OK, everything is fine, however now cannot connect to... (5 Replies)
Discussion started by: filosophizer
5 Replies
LEARN ABOUT DEBIAN
bt-audio
bt-audio(1) bluez-tools bt-audio(1)NAME
bt-audio - a bluetooth generic audio manager
SYNOPSIS
bt-audio [OPTION...]
Help Options:
-h, --help
Application Options:
-a, --adapter=<name|mac>
-c, --connect=<name|mac>
-d, --disconnect=<name|mac>
DESCRIPTION
This utility is used to manage outgoing audio service connections.
OPTIONS -h, --help
Show help
-a, --adapter <name|mac>
Specify adapter to use by his Name or MAC address
(if this option does not defined - default adapter used)
-c, --connect <name|mac>
Connect all supported audio profiles on the device
-d, --disconnect <name|mac>
Disconnect all audio profiles on the device
AUTHOR
Alexander Orlenko <zxteam@gmail.com>.
SEE ALSO bt-adapter(1)bt-agent(1)bt-device(1)bt-input(1)bt-monitor(1)bt-network(1)bt-serial(1)
2010-08-11 bt-audio(1)