Problem with read data from serial device Post: 302399481

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

serial port device path

hi. Im trying to install a switch. And the manual says i should type a command including a SerialPortDevicePath. which is the filepath to serial port used for connection. However.. nothing about how to find this info. Could anyone help me where to find this path? thx mr.T

2. Programming

Accessing device with Prolific USB-serial controller.

I am trying to access DG-100 gps logger on Mac OS X with POSIX API. The device uses a Prolific usb-serial controller, and connect to the usb port on my mac. After I install the Prolific driver, it shows up as /dev/tty.usbserial and /dev/cu.usbserial. The vendor has published the data format. So...

3. Linux

Device serial number

Hey! I'm trying to figure out a sollution for a problem I have at my company with an Iomega MiniMax 500 GB USB disk. If i run cat /proc/bus/usb/devices I get this information: T: Bus=01 Lev=02 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00...

4. Ubuntu

Ubuntu 9.04 Serial application to telnet to serial device

Hello! I am working on an application which reads environmental instruments which have serial ports. The application requires a serial port to be present to talk to the device (i.e. /dev/ttyS0 ). In some instances the environmental devices will be 100's of yards away from the computer, so a...

5. Shell Programming and Scripting

problem to read data in array

My input is a long list of data start with "#": #read_1 123456898787987 #read_2 54645646540646406 #read_3 4654564654316 . . I got a bit confusing about how to set all in an array first. And then when I run a program name "statistic_program", it will read the array in scalar and do...

6. AIX

Tape drive problem - no process to read data written to a pipe

Hi Everyone, The machine I'm working on is an AIX 5.3 LPAR running on a P650. oslevel -r shows 5300-08. I'm trying to take a backup to a SCSI tape drive, which has been working up until this point. I know of nothing that has changed recently to cause this problem. But when I try to take a...

7. SCO

Modifying serial printers device

I am trying to change one of my serial printers from /dev/ttyr002 to /dev/ttyr014: lpstat -s device for check3: /dev/ttyr002 device for check4: /dev/ttyr002 I changed the tty setting for check3 in: /etc/printcap /var/spool/lp/admins/lp/printers/check3 to /dev/ttyr014 Then I get:...

8. Programming

Wrong data with Read from a serial port.

hi, I've a problem on my C/C++ program with Posix Library. I have to read data from the serial but I have incorrect data, in fact I get a bunch of zeros: "2953.3174, 2785.2126, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0 , 0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 ,...

9. Programming

Read from serial port

Hi I try to communicate with a GSM modem, from C, for sending SMS. I use standart AT-commands. Working well with terminal. There is no problem writing ti the port. But when I try to read I only get a echo, I write "ATI" and get "ATI" back, I should get somthing like "SIEMENS 35...

10. Shell Programming and Scripting

Read line from serial device with BASH

I'm new to Linux (Ubuntu 16.04), and very new to BASH scripting. I have a Numato 8-channel USB GPIO device, which is a DAQ that appears in the system as a serial port. In Linux it appears as ttyACM0. I can easily manipulate a GPO with, for example: echo "gpio set 7" > /dev/ttyACM0 ...followed...

LEARN ABOUT DEBIAN

bt-serial

bt-serial(1)							    bluez-tools 						      bt-serial(1)

NAME

       bt-serial - a bluetooth serial manager

SYNOPSIS

       bt-serial [OPTION...]

       Help Options:
	 -h, --help

       Application Options:
	 -a, --adapter=<name|mac>
	 -c, --connect <name|mac> <pattern>
	 -d, --disconnect <name|mac> <tty_device>

DESCRIPTION

       This utility is used to manage serial service connections.

OPTIONS

       -h, --help
	   Show help

       -a, --adapter <name|mac>
	   Specify adapter to use by his Name or MAC address
	   (if this option does not defined - default adapter used)

       -c, --connect <name|mac> <pattern>
	   Connects to a specific RFCOMM based service on a
	   remote device and then creates a RFCOMM TTY
	   device for it; `pattern` is a profile short name (spp, dun),
	   RFCOMM channel (1-30)

       -d, --disconnect <name|mac> <tty_device>
	   Disconnect a RFCOMM TTY device that has been created

AUTHOR

       Alexander Orlenko <zxteam@gmail.com>.

SEE ALSO

       bt-adapter(1) bt-agent(1) bt-audio(1) bt-device(1) bt-input(1) bt-monitor(1) bt-network(1)

								    2010-08-12							      bt-serial(1)

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

serial port device path

Discussion started by: tyskert�s

2. Programming

Accessing device with Prolific USB-serial controller.

Discussion started by: monkeybiz

3. Linux

Device serial number

Discussion started by: noratx

4. Ubuntu

Ubuntu 9.04 Serial application to telnet to serial device

Discussion started by: mvona