Sponsored Content
Full Discussion: format can't find a disk
Operating Systems Solaris format can't find a disk Post 302387335 by PatrickBaer on Friday 15th of January 2010 10:13:48 AM
Old 01-15-2010
format can't find a disk

Hello all,

I was hoping to use a spare NAS as a ZFS fileserver and try a few things.

Unfortunately it has a huge raid for data, but a small 1G system disk. As I want to use the kernel CIFS server, I need OpenSolaris, which doesn't install without all the bloated Gnomestuff (oh well)

So I thought about a manual install with the live cd from an installation I will do from a Virtualbox Guest.

Anyway, when I start the installer (on the nas) I can see the 1G drive as too small, but it's there. When I enter format, it says "no disks found"! Yet, using disk /dev/rdsk/c7t0d0p0 it is recognized. Again, with c7t0d0 it says "must use a raw device"

Any suggestions?

---------- Post updated at 10:13 AM ---------- Previous update was at 09:58 AM ----------

Solved


format -e did the trick
 

9 More Discussions You Might Find Interesting

1. AIX

Format a Hard disk

Hello I am trying to format an extra hard disk, I want to purge all data. Does any one know how to do this, I found a format command but it only works for floppies , also related to do this how do you defrag ? I am running AIX 5.3 Thanks (1 Reply)
Discussion started by: mrmeswani
1 Replies

2. Solaris

how to format a hard disk

hi, i want to format one hard disk in solaris. can you pls help on this.. (2 Replies)
Discussion started by: visu_ak
2 Replies

3. Solaris

Disk Format Question

Wondering if anyone could tell about how long it will take to perform 3 passes on a 72 GB disk? I have a Sun V240 and will have to format all 4. Thanks. (1 Reply)
Discussion started by: buckhtr77
1 Replies

4. AIX

how to find out disk capacity

Hi, I would like to know how to find out disk capacity if it is assigned from the storage as a lun. as per below command , I am unable to find out disk capacity. $ bash bash-3.00$ lspv hdisk1 0001579a7fa3c086 None $ lscfg -vl hdisk1 hdisk1 ... (8 Replies)
Discussion started by: manoj.solaris
8 Replies

5. Solaris

Command to format Oracle ASM raw disk

Hi, Can any one please provide the command to format an Oracle Raw Disk in Solaris 10. I have been used the following commands: dd if=/dev/zero of=<raw disk path> Thanks ---------- Post updated at 12:20 PM ---------- Previous update was at 10:11 AM ---------- Well this didn't give... (0 Replies)
Discussion started by: Mack1982
0 Replies

6. UNIX for Dummies Questions & Answers

Are disk format across AIX and Solaris platforms compatable?

I totally new to UNIX and I have a newbie question. I have 2 servers, AIX and Solaris and I need to be on just one platform. both serves have 2 physical drives, with the OS on one and data on the other. can I take the data drive from the AIX server and mount it on the Solaris server? or would... (2 Replies)
Discussion started by: AusTan24
2 Replies

7. HP-UX

How to find out boot disk

Hi, I have two disk in a machine # ioscan -funC disk Class I H/W Path Driver S/W State H/W Type Description ================================================================== disk 0 0/2/1/0.0.0.0.0 sdisk CLAIMED DEVICE HP DH072ABAA6 ... (4 Replies)
Discussion started by: ericbj
4 Replies

8. Red Hat

Help to Find out Available disk space

I need to find available disk space for /home. $ df /home Filesystem 1K-blocks Used Available Use% Mounted on /dev/mahhh/VolGroup11-LogVol00 32281452 45028 26034172 15% / $df /home |tail -1| awk '{print $4}' 15% The above result shows the... (5 Replies)
Discussion started by: Anu_1
5 Replies

9. Solaris

No local disk in format in Solaris

I have Solaris-10 server. During troubleshooting of some storage issue, I removed disk entries from /dev/dsk and /dev/rdsk rm /dev/vx/dmp/* rm /dev/vx/rdmp/* rm /dev/dsk/* rm /dev/rdsk/ And rebooted the box. That recreated device tree for SAN disks, but I do not see c1t0d0s0 and c1t1d0s0... (7 Replies)
Discussion started by: solaris_1977
7 Replies
installboot(1M) 														   installboot(1M)

NAME
installboot - install bootblocks in a disk partition SYNOPSIS
installboot bootblk raw-disk-device The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition. The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be found using the -i option of uname(1). The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead. bootblk The name of the bootblock code. raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read- able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive. Example 1: Installing UFS Boot Block To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use: example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk /dev/rdsk/c1t0d0s0 /usr/platform/platform-name/lib/fs/ufs directory where ufs boot objects reside. /platform/platform-name/ufsboot second level program to boot from a disk or CD See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5) WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device. 11 Apr 2005 installboot(1M)
All times are GMT -4. The time now is 11:50 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy