I was trying to test run a /bin/bash script i had just written when my monitor suddenly went blank.I had to shut down the machine from the systems main power. I was unable to boot afterwards and soo i went for the interactive boot process by typing boot -a.
I succeded in the first stage of the... (1 Reply)
I have a Sun box that I am trying to get started up, but everytime it will crap out because it is bound to an NIS domain that no longer exists. The Master for that domain was put out of commission. It was suggested to me that I could boot off of the Installation cd for the OS (Solaris 8) and... (4 Replies)
I could write a long spec here, however.....we are looking at investing in one of thise shiny blue Sun V440's. Rediculousely expensive, however possibly more cost effective over time...too much time listening to salesmen. To the point has anyone actually performed a comparison for Oracle running on... (4 Replies)
Hi,
I have a Sun 3500 server on which i installed solaris 8 and have also installed veritas 4.0 on it. i dont know why from the time i have built this server whenever i try to boot it, the server doesnot come back smooth.... i have got to connect a laptop to the serial port of the server and... (3 Replies)
Hi,
I need a clarification.
Is there any difference between AIX box and Sun Solaris box?
The bzip command with -c option works in AIX box and the same does not work in Sun Solaris box.
Can anyone please explain if there is an implementation difference in both these boxes for the shell... (1 Reply)
Hello
I have Sun Ultra 10 with Solaris 7 installed on it.
Sometimes back
after that the machine use to get hang .Even after
rebooting the system was not booting.
I have manually switch on /off many times from the
power board itself .Once in a while it
use to boot .After... (12 Replies)
Hello Everyone,
First: English is not my native language, sorry.
I was given today on the work of a SUN Enterprse 220r, then I was going to install Debian-sparc, but the server remains in the boot process in a loop of the Fork interpreter depends (begin to load with power-up) starts the... (4 Replies)
Quick backgound. We just moved the Datacenter. I attempted to boot one of our older AIX machines backup and it stops at a 518 Error code. Which is fine I need to run fsck on the volumes. The issue is I can't find the original media with the appropriate Date that was originally installed(previous... (1 Reply)
Booting problem on Sun 3500
Hi,
I have a Sun 3500 server on which i installed solaris 5.2 installed . i dont know why from the time i have built this server whenever i try to boot it, the server doesnot come back smooth.i got a message Sync file system than restart
some times showing ok... (2 Replies)
Hello
I have an old sun fire v250 server that I am trying to revive.
I am trying to boot it from cdrom to install the OS (Solaris 10). The original data in the disk is corrupt and I am trying to do a new clean install. However I encounter the following errors.
Does it look like the disk itself... (1 Reply)
Discussion started by: br1an
1 Replies
LEARN ABOUT MOJAVE
installboot
installboot(1M)installboot(1M)NAME
installboot - install bootblocks in a disk partition
SYNOPSIS
installboot bootblk raw-disk-device
The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.
The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
found using the -i option of uname(1).
The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead.
bootblk The name of the bootblock code.
raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read-
able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.
Example 1: Installing UFS Boot Block
To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:
example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk
/dev/rdsk/c1t0d0s0
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
/platform/platform-name/ufsboot
second level program to boot from a disk or CD
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.
11 Apr 2005 installboot(1M)