Ubuntu 9.04 Serial application to telnet to serial device Post: 302361528

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

serial port device path

hi. Im trying to install a switch. And the manual says i should type a command including a SerialPortDevicePath. which is the filepath to serial port used for connection. However.. nothing about how to find this info. Could anyone help me where to find this path? thx mr.T

2. AIX

cant telnet to aix 5.2 and not even access through serial console

I have installed aix 5.2 on aix box through serial console connected to COM 1 . I even get a login prompt after the fresh installation . But as soon as i give a root & enter i again get a login prompt.i..e I am not able to logon after a fresh installation. and even i configured IP configuration...

3. Programming

Accessing device with Prolific USB-serial controller.

I am trying to access DG-100 gps logger on Mac OS X with POSIX API. The device uses a Prolific usb-serial controller, and connect to the usb port on my mac. After I install the Prolific driver, it shows up as /dev/tty.usbserial and /dev/cu.usbserial. The vendor has published the data format. So...

4. Linux

Device serial number

Hey! I'm trying to figure out a sollution for a problem I have at my company with an Iomega MiniMax 500 GB USB disk. If i run cat /proc/bus/usb/devices I get this information: T: Bus=01 Lev=02 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00...

5. Solaris

Redirect an application with a Serial connection

Hi community, I've currently working on SUN Server V490 and I'm connecting with a Serial port (I DON'T HAVE ANY IP CONNECTIVITY)...I need to redirect the graphic interface of Oracle with the dbca command; I know a way with an IP Connectivity ( use a X-Server and then setenv DISPLAY...

6. Programming

Problem with read data from serial device

I have problem with C programming. I want to send & receive data through serial communication. I send data(command) to device to get data from device but when receive data, it can't get altogether of data. It get only some data. What should I do to get altogether of data? If all of...

7. Windows & DOS: Issues & Discussions

Telnet to a serial port

Hello all. I have an old computer with M$-DOS 7. I want to use it like a dumb terminal, with telnet. I need to connect it to my desktop These are my questions: How can i configure the serial port on dos? How can i telnet form dos to the serial port? How can i set up a telnet server on the...

8. SCO

Modifying serial printers device

I am trying to change one of my serial printers from /dev/ttyr002 to /dev/ttyr014: lpstat -s device for check3: /dev/ttyr002 device for check4: /dev/ttyr002 I changed the tty setting for check3 in: /etc/printcap /var/spool/lp/admins/lp/printers/check3 to /dev/ttyr014 Then I get:...

9. Shell Programming and Scripting

Read line from serial device with BASH

I'm new to Linux (Ubuntu 16.04), and very new to BASH scripting. I have a Numato 8-channel USB GPIO device, which is a DAQ that appears in the system as a serial port. In Linux it appears as ttyACM0. I can easily manipulate a GPO with, for example: echo "gpio set 7" > /dev/ttyACM0 ...followed...

LEARN ABOUT DEBIAN

bt-serial

bt-serial(1)							    bluez-tools 						      bt-serial(1)

NAME

       bt-serial - a bluetooth serial manager

SYNOPSIS

       bt-serial [OPTION...]

       Help Options:
	 -h, --help

       Application Options:
	 -a, --adapter=<name|mac>
	 -c, --connect <name|mac> <pattern>
	 -d, --disconnect <name|mac> <tty_device>

DESCRIPTION

       This utility is used to manage serial service connections.

OPTIONS

       -h, --help
	   Show help

       -a, --adapter <name|mac>
	   Specify adapter to use by his Name or MAC address
	   (if this option does not defined - default adapter used)

       -c, --connect <name|mac> <pattern>
	   Connects to a specific RFCOMM based service on a
	   remote device and then creates a RFCOMM TTY
	   device for it; `pattern` is a profile short name (spp, dun),
	   RFCOMM channel (1-30)

       -d, --disconnect <name|mac> <tty_device>
	   Disconnect a RFCOMM TTY device that has been created

AUTHOR

       Alexander Orlenko <zxteam@gmail.com>.

SEE ALSO

       bt-adapter(1) bt-agent(1) bt-audio(1) bt-device(1) bt-input(1) bt-monitor(1) bt-network(1)

								    2010-08-12							      bt-serial(1)