Ubuntu 9.04 Serial application to telnet to serial device Post: 302360617

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

serial port device path

hi. Im trying to install a switch. And the manual says i should type a command including a SerialPortDevicePath. which is the filepath to serial port used for connection. However.. nothing about how to find this info. Could anyone help me where to find this path? thx mr.T

2. AIX

cant telnet to aix 5.2 and not even access through serial console

I have installed aix 5.2 on aix box through serial console connected to COM 1 . I even get a login prompt after the fresh installation . But as soon as i give a root & enter i again get a login prompt.i..e I am not able to logon after a fresh installation. and even i configured IP configuration...

3. Programming

Accessing device with Prolific USB-serial controller.

I am trying to access DG-100 gps logger on Mac OS X with POSIX API. The device uses a Prolific usb-serial controller, and connect to the usb port on my mac. After I install the Prolific driver, it shows up as /dev/tty.usbserial and /dev/cu.usbserial. The vendor has published the data format. So...

4. Linux

Device serial number

Hey! I'm trying to figure out a sollution for a problem I have at my company with an Iomega MiniMax 500 GB USB disk. If i run cat /proc/bus/usb/devices I get this information: T: Bus=01 Lev=02 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00...

5. Solaris

Redirect an application with a Serial connection

Hi community, I've currently working on SUN Server V490 and I'm connecting with a Serial port (I DON'T HAVE ANY IP CONNECTIVITY)...I need to redirect the graphic interface of Oracle with the dbca command; I know a way with an IP Connectivity ( use a X-Server and then setenv DISPLAY...

6. Programming

Problem with read data from serial device

I have problem with C programming. I want to send & receive data through serial communication. I send data(command) to device to get data from device but when receive data, it can't get altogether of data. It get only some data. What should I do to get altogether of data? If all of...

7. Windows & DOS: Issues & Discussions

Telnet to a serial port

Hello all. I have an old computer with M$-DOS 7. I want to use it like a dumb terminal, with telnet. I need to connect it to my desktop These are my questions: How can i configure the serial port on dos? How can i telnet form dos to the serial port? How can i set up a telnet server on the...

8. SCO

Modifying serial printers device

I am trying to change one of my serial printers from /dev/ttyr002 to /dev/ttyr014: lpstat -s device for check3: /dev/ttyr002 device for check4: /dev/ttyr002 I changed the tty setting for check3 in: /etc/printcap /var/spool/lp/admins/lp/printers/check3 to /dev/ttyr014 Then I get:...

9. Shell Programming and Scripting

Read line from serial device with BASH

I'm new to Linux (Ubuntu 16.04), and very new to BASH scripting. I have a Numato 8-channel USB GPIO device, which is a DAQ that appears in the system as a serial port. In Linux it appears as ttyACM0. I can easily manipulate a GPO with, for example: echo "gpio set 7" > /dev/ttyACM0 ...followed...

LEARN ABOUT NETBSD

urlphy

URL(4)							   BSD Kernel Interfaces Manual 						    URL(4)

NAME

     url -- Realtek RTL8150L USB Ethernet driver

SYNOPSIS

     url*    at uhub?
     urlphy* at mii?

DESCRIPTION

     The url driver provides support for USB Ethernet adapters based on the Realtek RTL8150L USB-ether bridge chip.

     The url driver supports the following adapters:

	   CompUSA USBKR100
	   GreenHouse GH-USB100B
	   Melco Inc. LUA-KTX
	   Sitecom LN013

     For more information on configuring this device, see ifconfig(8).

DIAGNOSTICS

     url%d: watchdog timeout  A packet was queued for transmission and a transmit command was issued, however the device failed to acknowledge the
     transmission before a timeout expired.

     url%d: no memory for rx list  The driver failed to allocate an mbuf for the receiver ring.

SEE ALSO

     arp(4), mii(4), netintro(4), usb(4), ifconfig(8)

HISTORY

     The url device driver first appeared in NetBSD 1.6.

AUTHORS

     The url driver was written by Shingo WATANABE <nabe@nabechan.org>.

BSD
								September 18, 2006							       BSD