09-02-2009
If it can't read from it well enough to boot from it, it probably won't work bootstrapping to CD from a boot floppy either. Unless 'wakepup' downloads from the internet instead, which you didn't mention, and would be a bad idea with only 32 megs of RAM.
Last edited by Corona688; 09-02-2009 at 12:16 PM..
10 More Discussions You Might Find Interesting
1. Programming
Hi All
Following is the lines of code which simply makes a structure of 1 bit member and 7 bit is unused.Then the structure is initialised with char pointer.The output on HPUX(BIG Endian) and Compaq(Little Endian) are different.On HPUX it gives zero and Compaq it gives 1. I never thought that the... (7 Replies)
Discussion started by: Shobhit
7 Replies
2. Filesystems, Disks and Memory
Howto make Debian GNU/Linux install boot on a Compaq DeskPro XL 590 with Compaq SCSI diskdrive?
The problem is that Compaq's Scsi controller sems to be odd.
help please :) (0 Replies)
Discussion started by: Esaia
0 Replies
3. SCO
Trying to install Sco openserver on HP Proliant with this scsi controller but no scsi devices detected.
Boot controller is set as the smart array 532 but SCSI diags do not detect any SCSI boot devices during boot sequence
Any help appreciated (2 Replies)
Discussion started by: farmacy
2 Replies
4. UNIX for Dummies Questions & Answers
Hi,
I am new to UNIX. I need help in working with Compaq-UX TRU64 OS.
How It work FTP Server?
ANd MAil Server?
and I have apach pprogram project and it work as HTTP Server.
Also I need how can setup a new version of progrm on UNix like mozilla and adobe reader etc...........
Thank... (3 Replies)
Discussion started by: svuad
3 Replies
5. UNIX for Dummies Questions & Answers
I am trying to re-install this netwrok adapter on a server which has just had the motherboard replaced - so much for fault tolerant. I am running SCO Opensercer 5.0.7
Can anyone tell me the Bus no , device number etc that I need to configure this card?
Thanks in advance
Richard (3 Replies)
Discussion started by: farmacy
3 Replies
6. SCO
i want to install sco unix 5.0.5 on compaq presario laptop c773tu dual boot with windos xp.
the HDD is 160 GB
RAM 2046 MB ddr2.
I have created partitions and loaded Win XP
While installing SCO Unix 5.0.5 i get the following problem
1)memory excessively fragmented. I get around it by sepcifying... (0 Replies)
Discussion started by: vikramviky
0 Replies
7. SuSE
Any one try this. I am getting errors or it just hangs up. I have tried redhat, suse,ubuntu etc but nothing will load.
When i try to boot the live cd they boot up OK but then just hang after a while and the cd rom stop spinning etc.
Just wondering if anyone has use this hdw and what linux... (2 Replies)
Discussion started by: admaix
2 Replies
8. Windows & DOS: Issues & Discussions
Hi all,
Laptop compaq presario v3000 is not booting! It just gives 3 beeps and there is no display. All the green LEDs are glowing!
I have "performed a hard reset" as per HP site
Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot Compaq Presario V3115AU... (7 Replies)
Discussion started by: ./hari.sh
7 Replies
9. HP-UX
Hello all,
I hope someone can help me.
We have Compaq Tru64 UNIX V5.1B (Rev. 2650).
By latest Belarus government act Europe/Minsk timezone was changed to
GMT+3 without DST (was GMT+2 with DST).
Please advice how to do changes on our machine.
Thank You in advance,
md1982 (15 Replies)
Discussion started by: md1982
15 Replies
10. Hardware
Hi gurus, I am experiencing strange networks problems. I am trying to teather internet from HTC Desire S with Android. Basicly I followed those instructions: https://wiki.archlinux.org/index.php/Android_Tethering#Procedure
1.) Enable USB Debugging - Phone: Settings --> Applications -->... (0 Replies)
Discussion started by: wakatana
0 Replies
TL(4) BSD Kernel Interfaces Manual TL(4)
NAME
tl -- Ethernet driver for Texas Instruments ThunderLAN based board
SYNOPSIS
tl* at pci? dev ? function ?
Configuration of PHYs is necessary. See mii(4).
DESCRIPTION
The tl device driver supports network adapters based on the Texas Instruments ThunderLAN chip.
HARDWARE
Supported cards include:
Compaq Netelligent
in baseboard and PCI variants (10BASE-T-only variant untested).
Compaq NetFlex 3/P
in baseboard variant only (the PCI variant doesn't use the same chip!).
It Baseboard Compaq Deskpro 4000 5233MMX Ethernet
(This has been tested on the Deskpro 4000M only).
TI TravelMate 5000 series laptop docking station's Ethernet board.
MEDIA SELECTION
The different models of the supported boards come with some subset of RJ-45, BNC and AUI connectors. Media selection is done using
ifconfig(8) using the standard ifmedia(4) mechanism. Refer to those manual pages for more information.
The tl driver doesn't have full automatic media selection. By default it will do an Nway (IEEE 802.3u) negotiation on the 10BASE-T port for
the speed and duplex mode with the link partner. If the AUI or BNC port is used, an explicit media type must be specified to ifconfig(8).
SEE ALSO
ifmedia(4), mii(4), netintro(4), pci(4), ifconfig(8)
BUGS
The board marked as untested will always claim having an AUI connector, where it may be a BNC one.
BSD
May 16, 2009 BSD