08-18-2009
It's very very strange. I have not found any kind of information about.
Could you post the next?:
lsmod | grep ^dm
uname -a
cat /etc/*release
cat /etc/multipath.conf
10 More Discussions You Might Find Interesting
1. HP-UX
# ioscan -f | grep disk
Class I H/W Path Driver S/W State H/W Type Description
disk 3 0/0/2/0.0.0.0 sdisk CLAIMED DEVICE TEAC DV-28E-N
disk 1 0/1/1/0.0.0 sdisk CLAIMED DEVICE HP 146 GST3146707LC ... (1 Reply)
Discussion started by: bluepluto
1 Replies
2. UNIX for Dummies Questions & Answers
how to undef a readonly parameter? (2 Replies)
Discussion started by: tukuna82
2 Replies
3. Red Hat
Hi,
I had a doubt regarding device mapper notations and their corresponding LVM volumes.
I have configured a volume group with two logical volumes in it as root and swap.
The entries in the /etc/fstab file show the dm notations namely,
/dev/mapper/VolGroup00-LogVol01... (2 Replies)
Discussion started by: kanna_geekworkz
2 Replies
4. Linux
hello
my centOS newly installed system loading dmraid modules on startup
I did remove all LVM/raid things from system installation menus and after installation too but dmraid is still there
and he says: no raid disks found
also I did modprobe -r dm_raid45 and it do remove it but only until... (7 Replies)
Discussion started by: tip78
7 Replies
5. Red Hat
Hi,
I have a server program that reads data coming in on USB ports. Device paths are in the format: /dev/ttyUSB0
Now, I would like to log data from another device coming in over Ethernet. My first step is trying to track down what the correct device path is which I am unsure of.
Anyone... (9 Replies)
Discussion started by: fedora18
9 Replies
6. Red Hat
Good morning
Recently we needed to change the password from a redhat 6.5 system that no one knew the root password.
Starting the system with the init=/bin/bash method took us to the following scenario:
system_vg active with only root_lv and tmpfs mounted.
our entries at fstab are like... (1 Reply)
Discussion started by: Ikaro0
1 Replies
7. Red Hat
Hi,
How to find the raw device/multipath details of the LUN used by the diskgroups of the database.
file system type -- ASM
Oracle -- 11.2.0.3.0
OS -- Linux
This is RAC database.
Regards,
Maddy (2 Replies)
Discussion started by: Maddy123
2 Replies
8. Red Hat
Hi,
I am testing on iSCSI + multipath, where i have one iSCSI lun assigned to one server.
mpatha (1IET 00010001) dm-2 IET,VIRTUAL-DISK
size=100M features='0' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=1 status=active
| `- 2:0:0:1 sda 8:0 active ready running
`-+-... (6 Replies)
Discussion started by: linux.amrit
6 Replies
9. UNIX for Advanced & Expert Users
Currently I am using this laborious command
lvdisplay | awk '/LV Path/ {p=$3} /LV Name/ {n=$3} /VG Name/ {v=$3} /Block device/ {d=$3; sub(".*:", "/dev/dm-", d); printf "%s\t%s\t%s\n", p, "/dev/mapper/"v"-"n, d}'
Would like to know if there is any shorter method to get this mapping of... (2 Replies)
Discussion started by: royalibrahim
2 Replies
10. Solaris
Hello,
I am trying to setup a storage server with salvaged equipments:
QSSC-S4R server, with QLogic 2562 FC HBA's
Clariion KTN-STL4 4GB FC Enclosures
Disks Salvaged from EMC Vmax
Disks are 520B sector size so i converted to 512B in linux environment and create multipath successfully. But... (4 Replies)
Discussion started by: amd103
4 Replies
BZEXE(1) General Commands Manual BZEXE(1)
NAME
bzexe - compress executable files in place
SYNOPSIS
bzexe [ name ... ]
DESCRIPTION
The bzexe utility allows you to compress executables in place and have them automatically uncompress and execute when you run them (at a
penalty in performance). For example if you execute ``bzexe /bin/cat'' it will create the following two files:
-r-xr-xr-x 1 root bin 9644 Feb 11 11:16 /bin/cat
-r-xr-xr-x 1 bin bin 24576 Nov 23 13:21 /bin/cat~
/bin/cat~ is the original file and /bin/cat is the self-uncompressing executable file. You can remove /bin/cat~ once you are sure that
/bin/cat works properly.
This utility is most useful on systems with very small disks.
OPTIONS
-d Decompress the given executables instead of compressing them.
SEE ALSO
bzip2(1), znew(1), zmore(1), zcmp(1), zforce(1)
CAVEATS
The compressed executable is a shell script. This may create some security holes. In particular, the compressed executable relies on the
PATH environment variable to find gzip and some other utilities (tail, chmod, ln, sleep).
BUGS
bzexe attempts to retain the original file attributes on the compressed executable, but you may have to fix them manually in some cases,
using chmod or chown.
BZEXE(1)