05-27-2009
all guidance you'll need, should be found at docs.sun.com or you can also start at sunsolve.sun.com for more infos about your hardware.
10 More Discussions You Might Find Interesting
1. Solaris
Hi all
A couple of new M5000 servers will be arriving soon and I need to work out how to configure the underlying domains.
It will come with 4 x CPUS, 32 Gb of memory, 4 x HD, 2 x IOtrays.
Reading the XSCF manual, I can configure the item into 2 domains, something about uni / quad xsb.... (9 Replies)
Discussion started by: sbk1972
9 Replies
2. Solaris
Hi i 've a M5000 running 2 domains in my Lab with following hardconf
SPARC Enterprise M5000; Memory_Size:128 GB;
+-----------------------------------+------------+
| FRU | Quantity |
+-----------------------------------+------------+
| MBU_B... (3 Replies)
Discussion started by: fugitive
3 Replies
3. Solaris
Please advise. Thank you
bash-3.00# cd /usr/sunvts/bin/
bash-3.00# ls
bios.bin iobushangscript.sh stopsunvts vtsprobe
cmos.bin javabridge.jar sunlink vtsreportgenerate
dispatcher loadVtsServer svmVolDiskList vtstalk
env6test... (6 Replies)
Discussion started by: incredible
6 Replies
4. Hardware
I have an M5K with disk issues I'm trying to troubleshoot, and it's causing me some confusion. I know the host has four on-board HDDs, but the format command's output shows c0t0d0, c0t1d0, c3t0d0, and c3t1d0. cfgadm -al shows c0t3d0 as the DVD-ROM drive, and c1 and c2 as SAN disks. Confused yet?
... (2 Replies)
Discussion started by: desertdenizen
2 Replies
5. Solaris
Hi
We have an M5000 with one domain running Sun Cluster on it. We would like to split the domain into two domains. One with the existing Sun Cluster and one with a fresh install. We have 2 CPU Boards (8 CPU) / 4 Mem Boards (64 gb memory) and 2 IOU as well as 4 disks
Is it possible to have... (9 Replies)
Discussion started by: sanc
9 Replies
6. Solaris
Trying to update my M5000 firmware. trying to mount my USB to upload firmware and getting the following message.
XSCF> getflashimage -v file:///media/usb_msd/FFXCP1115.tar.gz
Free space: 97MB
Making sure mount point is clear
umount: /media/usb_msd is not mounted (according to mtab)
Trying... (2 Replies)
Discussion started by: soupbone38
2 Replies
7. Solaris
Hi Forum
please help me to fix M5000 Server which we were not using. now i logged to serve and foung that everything is showing as Deconfigured.
XSCF> showhardconf
SPARC Enterprise M5000;
+ Serial:BDF1051F30; Operator_Panel_Switch:Locked;
+ Power_Supply_System:Single;... (4 Replies)
Discussion started by: bentech4u
4 Replies
8. IP Networking
I took over an M5000 and have a jumper server with a nic to connect to the console IP of an M5000. access via ssh user@ip.
it was working fine, another person can connect remotely on the subnet, but when I ssh,it just hangs and then times out.
so my question is,
any ideas of what I might... (4 Replies)
Discussion started by: rrodgers
4 Replies
9. Solaris
I have an m5000 that Is down.
I have access to XSCF>
and was able to get to the ok prompt.
However, on
>ok boot
it failed to boot.
erred with :
svc.startd: svc:/system/device/fc-fabric:default: Method "/lib/svc/method/fc-fabric" failed due to signal KILL.
Nov 29... (3 Replies)
Discussion started by: goya
3 Replies
10. Hardware
on an m5000 , I can not power it up, system failure.
XSCF> poweron -a
DomainIDs to power on:00,01
Continue? :y
00 :Not powering on :Poweron canceled due to missing component.
01 :Not powering on :Poweron canceled due to missing component.
the only fault that I can see is:
... (4 Replies)
Discussion started by: goya
4 Replies
LEARN ABOUT DEBIAN
dtc_setup_vps_disk
dtc_setup_vps_disks(8) System Manager's Manual dtc_setup_vps_disks(8)
NAME
dtc_setup_disk - setup LVM disks for using it as a VM
SYNOPSIS
dtc_setup_vps_disk.sh VPS_NUMBER HDD_SIZE SWAP_SIZE [ lvm|loopback ]
DESCRIPTION
dtc_setup_vps_disk.sh This shell script is a part of the dtc-xen package that is to be used by the dtc panel to manage a Xen VPS server.
This script is used to create partitions to be used by a VPS later on. It will create a normal partition that will be used as a root disk,
and a swap partition.
dtc_setup_disk is to be used by the dtc-xen SOAP server, but can also be used as a standalone userland tool.
If the partition(s) exists, then this script will delete it/them first.
OPTIONS
VPS_NUMBER has to be a number between 01 and 19. Let's say the number is 16, and that dtc-xen is configured to use the volume group called
lvm1, then this script will create /dev/lvm1/xen16 and /dev/lvm1/xen16swap.
HDD_SIZE Size in MB of the VPS partition to create.
SWAP_SIZE Size in MB of the VPS swap partition to create. If the dtc-xen SOAP server is used to create the VPS, then it will create a swap
partition of the exact same size as the memory.
IMAGE_TYPE This parameter can have 2 values: either lvm or loopback. If ommited, then lvm is used. If lvm is used, then this script will
create a partition using lvmcreate, otherwise it will create an image file. Both will later be used for the VPS.
EXAMPLE
dtc_setup_vps_disk 04 15360 256 lvm
This will create 2 LVM partition to be used by the VPS named xen04, the first one being a root partition of 15 GB, and the second one being
a swap partition of 256 MB.
VERSION
This documentation describes dtc_setup_vps_disk version 0.3.15. See http://www.gplhost.com/software-dtc-xen.html for updates.
SEE ALSO
dtc_reinstall_os(8), dtc_kill_vps_disk(8)
dtc_setup_vps_disks(8)