fsadm_selinux(8)					       SELinux Policy fsadm						  fsadm_selinux(8)

NAME

       fsadm_selinux - Security Enhanced Linux Policy for the fsadm processes

DESCRIPTION

       Security-Enhanced Linux secures the fsadm processes via flexible mandatory access control.

       The  fsadm  processes  execute with the fsadm_t SELinux type. You can check if you have these processes running by executing the ps command
       with the -Z qualifier.

       For example:

       ps -eZ | grep fsadm_t

ENTRYPOINTS

       The fsadm_t SELinux  type  can  be  entered  via  the  unlabeled_t,  proc_type,	file_type,  mtrr_device_t,  filesystem_type,  sysctl_type,
       fsadm_exec_t file types.

       The default entrypoint paths for the fsadm_t domain are the following:

       all  files  on  the  system,  /dev/cpu/mtrr,  /sbin/fsck.*,  /sbin/jfs_.*, /sbin/mkfs.*, /sbin/swapon.*, /sbin/resize.*fs, /sbin/losetup.*,
       /usr/sbin/fsck.*, /usr/sbin/jfs_.*, /usr/sbin/mkfs.*,  /sbin/reiserfs(ck|tune),	/usr/sbin/swapon.*,  /usr/sbin/resize.*fs,  /usr/sbin/los-
       etup.*,	 /usr/sbin/reiserfs(ck|tune),	/sbin/dump,  /sbin/blkid,  /sbin/fdisk,  /sbin/partx,  /sbin/cfdisk,  /sbin/e2fsck,  /sbin/e4fsck,
       /sbin/findfs, /sbin/hdparm, /sbin/lsraid, /sbin/mke2fs, /sbin/mke4fs, /sbin/mkraid, /sbin/parted, /sbin/sfdisk,	/usr/bin/raw,  /sbin/dosf-
       sck,  /sbin/e2label,  /sbin/mkdosfs,  /sbin/tune2fs,  /sbin/blockdev,  /sbin/dumpe2fs,  /usr/sbin/dump,	/sbin/partprobe,  /sbin/raidstart,
       /sbin/scsi_info, /usr/sbin/blkid, /usr/sbin/fdisk, /usr/sbin/partx, /sbin/mkreiserfs, /sbin/xfs_growfs, /usr/sbin/cfdisk, /usr/sbin/e2fsck,
       /usr/sbin/e4fsck,    /usr/sbin/findfs,	 /usr/sbin/hdparm,   /usr/sbin/lsraid,	 /usr/sbin/mke2fs,   /usr/sbin/mke4fs,	 /usr/sbin/mkraid,
       /usr/sbin/parted,  /usr/sbin/sfdisk,  /sbin/install-mbr,  /sbin/raidautorun,   /usr/bin/syslinux,   /usr/sbin/dosfsck,	/usr/sbin/e2label,
       /usr/sbin/mkdosfs,  /usr/sbin/tune2fs, /sbin/make_reiser4, /usr/sbin/blockdev, /usr/sbin/dumpe2fs, /usr/sbin/smartctl, /usr/sbin/partprobe,
       /usr/sbin/raidstart,  /usr/sbin/scsi_info,  /usr/sbin/mkreiserfs,  /usr/sbin/clubufflush,   /usr/sbin/install-mbr,   /usr/sbin/raidautorun,
       /usr/sbin/make_reiser4, /usr/bin/partition_uuid, /usr/bin/scsi_unique_id, /usr/lib/systemd/systemd-fsck

PROCESS TYPES

       SELinux defines process types (domains) for each process running on the system

       You can see the context of a process using the -Z option to ps

       Policy governs the access confined processes have to files.  SELinux fsadm policy is very flexible allowing users to setup their fsadm pro-
       cesses in as secure a method as possible.

       The following process types are defined for fsadm:

       fsadm_t

       Note: semanage permissive -a fsadm_t can be used to make the process type fsadm_t permissive. SELinux does not deny  access  to	permissive
       process types, but the AVC (SELinux denials) messages are still generated.

BOOLEANS

       SELinux	policy is customizable based on least access required.	fsadm policy is extremely flexible and has several booleans that allow you
       to manipulate the policy and run fsadm with the tightest access possible.

       If you want to allow all daemons the ability to read/write terminals, you must turn on the daemons_use_tty boolean. Disabled by default.

       setsebool -P daemons_use_tty 1

       If you want to deny user domains applications to map a memory region as both executable and writable, this is dangerous and the	executable
       should be reported in bugzilla, you must turn on the deny_execmem boolean. Enabled by default.

       setsebool -P deny_execmem 1

       If  you	want  to  deny	any  process  from ptracing or debugging any other processes, you must turn on the deny_ptrace boolean. Enabled by
       default.

       setsebool -P deny_ptrace 1

       If you want to allow all domains to use other domains file descriptors, you must turn on the domain_fd_use boolean. Enabled by default.

       setsebool -P domain_fd_use 1

       If you want to allow all domains to have the kernel load modules, you must turn on  the	domain_kernel_load_modules  boolean.  Disabled	by
       default.

       setsebool -P domain_kernel_load_modules 1

       If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default.

       setsebool -P fips_mode 1

       If you want to enable reading of urandom for all domains, you must turn on the global_ssp boolean. Disabled by default.

       setsebool -P global_ssp 1

       If  you want to control the ability to mmap a low area of the address space, as configured by /proc/sys/kernel/mmap_min_addr, you must turn
       on the mmap_low_allowed boolean. Disabled by default.

       setsebool -P mmap_low_allowed 1

       If you want to allow system to run with NIS, you must turn on the nis_enabled boolean. Disabled by default.

       setsebool -P nis_enabled 1

       If you want to disable kernel module loading, you must turn on the secure_mode_insmod boolean. Enabled by default.

       setsebool -P secure_mode_insmod 1

       If you want to boolean to determine whether the system permits loading policy, setting enforcing mode, and changing  boolean  values.   Set
       this to true and you have to reboot to set it back, you must turn on the secure_mode_policyload boolean. Enabled by default.

       setsebool -P secure_mode_policyload 1

       If  you	want  to allow unconfined executables to make their heap memory executable.  Doing this is a really bad idea. Probably indicates a
       badly coded executable, but could indicate an attack. This executable should  be  reported  in  bugzilla,  you  must  turn  on  the  selin-
       uxuser_execheap boolean. Disabled by default.

       setsebool -P selinuxuser_execheap 1

       If  you	want to allow all unconfined executables to use libraries requiring text relocation that are not labeled textrel_shlib_t, you must
       turn on the selinuxuser_execmod boolean. Enabled by default.

       setsebool -P selinuxuser_execmod 1

       If you want to allow unconfined executables to make their stack executable.  This should never, ever be	necessary.  Probably  indicates  a
       badly  coded  executable,  but  could  indicate	an  attack.  This  executable  should be reported in bugzilla, you must turn on the selin-
       uxuser_execstack boolean. Enabled by default.

       setsebool -P selinuxuser_execstack 1

       If you want to support X userspace object manager, you must turn on the xserver_object_manager boolean. Enabled by default.

       setsebool -P xserver_object_manager 1

       If you want to allow ZoneMinder to run su/sudo, you must turn on the zoneminder_run_sudo boolean. Disabled by default.

       setsebool -P zoneminder_run_sudo 1

MANAGED FILES

       The SELinux process type fsadm_t can manage files labeled with the following file types.  The paths listed are the default paths for  these
       file types.  Note the processes UID still need to have DAC permissions.

       file_type

	    all files on the system

FILE CONTEXTS

       SELinux requires files to have an extended attribute to define the file type.

       You can see the context of a file using the -Z option to ls

       Policy  governs	the  access  confined  processes have to these files.  SELinux fsadm policy is very flexible allowing users to setup their
       fsadm processes in as secure a method as possible.

       STANDARD FILE CONTEXT

       SELinux defines the file context types for the fsadm, if you wanted to store files with these types in a diffent paths, you need to execute
       the semanage command to sepecify alternate labeling and then use restorecon to put the labels on disk.

       semanage fcontext -a -t fsadm_exec_t '/srv/fsadm/content(/.*)?'
       restorecon -R -v /srv/myfsadm_content

       Note: SELinux often uses regular expressions to specify labels that match multiple files.

       The following file types are defined for fsadm:

       fsadm_exec_t

       - Set files with the fsadm_exec_t type, if you want to transition an executable to the fsadm_t domain.

       Paths:
	    /sbin/fsck.*,  /sbin/jfs_.*,  /sbin/mkfs.*,  /sbin/swapon.*,  /sbin/resize.*fs,  /sbin/losetup.*,  /usr/sbin/fsck.*, /usr/sbin/jfs_.*,
	    /usr/sbin/mkfs.*, /sbin/reiserfs(ck|tune), /usr/sbin/swapon.*, /usr/sbin/resize.*fs, /usr/sbin/losetup.*, /usr/sbin/reiserfs(ck|tune),
	    /sbin/dump, /sbin/blkid, /sbin/fdisk, /sbin/partx, /sbin/cfdisk, /sbin/e2fsck, /sbin/e4fsck, /sbin/findfs, /sbin/hdparm, /sbin/lsraid,
	    /sbin/mke2fs, /sbin/mke4fs, /sbin/mkraid,  /sbin/parted,  /sbin/sfdisk,  /usr/bin/raw,  /sbin/dosfsck,  /sbin/e2label,  /sbin/mkdosfs,
	    /sbin/tune2fs,  /sbin/blockdev,  /sbin/dumpe2fs,  /usr/sbin/dump,  /sbin/partprobe, /sbin/raidstart, /sbin/scsi_info, /usr/sbin/blkid,
	    /usr/sbin/fdisk,  /usr/sbin/partx,	 /sbin/mkreiserfs,   /sbin/xfs_growfs,	 /usr/sbin/cfdisk,   /usr/sbin/e2fsck,	 /usr/sbin/e4fsck,
	    /usr/sbin/findfs,	/usr/sbin/hdparm,   /usr/sbin/lsraid,	/usr/sbin/mke2fs,  /usr/sbin/mke4fs,  /usr/sbin/mkraid,  /usr/sbin/parted,
	    /usr/sbin/sfdisk, /sbin/install-mbr, /sbin/raidautorun, /usr/bin/syslinux,	/usr/sbin/dosfsck,  /usr/sbin/e2label,	/usr/sbin/mkdosfs,
	    /usr/sbin/tune2fs,	  /sbin/make_reiser4,	 /usr/sbin/blockdev,	/usr/sbin/dumpe2fs,    /usr/sbin/smartctl,    /usr/sbin/partprobe,
	    /usr/sbin/raidstart, /usr/sbin/scsi_info, /usr/sbin/mkreiserfs, /usr/sbin/clubufflush,  /usr/sbin/install-mbr,  /usr/sbin/raidautorun,
	    /usr/sbin/make_reiser4, /usr/bin/partition_uuid, /usr/bin/scsi_unique_id, /usr/lib/systemd/systemd-fsck

       fsadm_log_t

       - Set files with the fsadm_log_t type, if you want to treat the data as fsadm log data, usually stored under the /var/log directory.

       fsadm_tmp_t

       - Set files with the fsadm_tmp_t type, if you want to store fsadm temporary files in the /tmp directories.

       fsadm_var_run_t

       - Set files with the fsadm_var_run_t type, if you want to store the fsadm files under the /run or /var/run directory.

       Note:  File context can be temporarily modified with the chcon command.	If you want to permanently change the file context you need to use
       the semanage fcontext command.  This will modify the SELinux labeling database.	You will need to use restorecon to apply the labels.

COMMANDS

       semanage fcontext can also be used to manipulate default file context mappings.

       semanage permissive can also be used to manipulate whether or not a process type is permissive.

       semanage module can also be used to enable/disable/install/remove policy modules.

       semanage boolean can also be used to manipulate the booleans

       system-config-selinux is a GUI tool available to customize SELinux policy settings.

AUTHOR

       This manual page was auto-generated using sepolicy manpage .

SEE ALSO

       selinux(8), fsadm(8), semanage(8), restorecon(8), chcon(1), sepolicy(8) , setsebool(8)

fsadm								     14-06-10							  fsadm_selinux(8)