03-09-2009
Unable to mount/find new drives
Hi, I work offshore and we have a system that records excessive amounts of data (Terabytes), therefore we changed the 16 x 400GB drives to 16 x 1TB drives. However, since doing this, upon bootup, the system does not recognize the new drives. These drives are external drives in a chassis which is connected to the computer via SCSI lead. See quote below email to IT assistant:
Quote:
Yesterday we switched the drive chassis off and changed the hard drives from 400 GB to 1 TB. We then switched the chassis back on and it initialized itself which took 6 hours. We did not switch off the computer at all.
We then tried to reboot the computer and the following message keeps coming up
Quote:
No such file or directory while trying to open / dev/vol1/raid1
/dev/vol1/raid1:
The superblock could not be read or does not describe a correct ext2 file system. If the device is valid and it really contains an ext2 file system (and not swop or ufs or something else), then the superblock is corrupt and you might try running e2fsck with an alternate superblock
e2fsck -b 8193 <device> [ failed ]
it then come up with alt d for maintenance menu or enter to re-boot
Any help would be appreciated,
Kind regards
Russ
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Hi, I'm stuck in an awkward situation please help :)
I have two identical Seagate 80GB harddrives.
My objective is a bit strange.
1.I want to have a cloned disk as bootable backup
2.When booting using the master drive, I also want to mount the cloned backup disk so I can do incremental... (6 Replies)
Discussion started by: onthetopo
6 Replies
2. Solaris
Hi All,
I need help on this issue and it is a production server.
/usr is unable to mount and make system can't even type any commands.
Only this show and no changes makes to the system.
ERROR: svc:/system/filesystem/root:default failed to mount /usr (see 'svcs -x'
for details) ... (3 Replies)
Discussion started by: mailbox80
3 Replies
3. Solaris
Hi,
I am running Solaris 8 on a V880 which has recently crashed. It has got a fibre connection to a StorageTrek array containing my database info. Since the crash I have been unable to mount the 2 metadevices which correspond to /spool & /apps - these FS's contain my db info and theredore I... (20 Replies)
Discussion started by: Duffs
20 Replies
4. Fedora
Hi,
I'm new for unix. I tried to mount windows NTFS partition in Fedora unix, but it is saying ntfs not found. The command i used is
mount /dev/sdb1 -t ntfs /mnt/drive1
and how to find the available filesystem type?. (1 Reply)
Discussion started by: gwgreen1
1 Replies
5. Shell Programming and Scripting
Hi there
i need a way ( some sort of script maybe) to check if a mont point exist when but the physical drive does not
for example if i look in / and see that user_data2 directory exist but there is no user_data2 drive.
another hurdle would be that some of the machines have raided drives... (3 Replies)
Discussion started by: ab52
3 Replies
6. Solaris
had a D1000 connected to this Solaris10 server, for a while, everything worked good ..until today..
it can't find the other half of D1000 disks at all..all LEDs on the D1000 are in green..kept getting the below:
Dec 19 17:10:34 tocbs103 glm: WARNING: ID
Dec 19 17:10:34 tocbs103 scsi: ... (2 Replies)
Discussion started by: ppchu99
2 Replies
7. UNIX for Dummies Questions & Answers
Hi
I have created a RHEL6 machine that is hosted on VMWare player that in turn runs off my Windows 7 PC.
When I try and mount the CDROM on the RHEL6 box I get the following output:
$ mount /dev/cdrom/media
mount: can't find /dev/cdrom/media in /etc/fstab or /etc/mtab
$
Here is the... (3 Replies)
Discussion started by: accipiter1
3 Replies
8. UNIX for Dummies Questions & Answers
hi
Am trying to mount a cdrom which has a blank cd into it, using the command:
mount -v cdrfs -o ro /dev/cd0 /mnt
Am getting this error:
# df -Ig
Filesystem GB blocks Used Free %Used Mounted on
/dev/hd4 0.50 0.19 0.31 38% /
/dev/hd2 ... (1 Reply)
Discussion started by: kamaldev
1 Replies
9. Red Hat
Hi,
I am unable to mount the AIX share on Red Hat Linux 5.5
getting below error on linux server while mounting.
reason given by server: unknown nfs status return value: -1
I have checked on AIX side.
lssrc -g nfs showing below output.
bash-3.00# lssrc -g nfs
Subsystem ... (2 Replies)
Discussion started by: manoj.solaris
2 Replies
10. UNIX for Dummies Questions & Answers
Hello,
While mounting NFS below error is coming:
# mount -t nfs 10.65.150.69:/lvsnap /lvsnap
mount: mount to NFS server '10.65.150.69' failed: RPC Error: Program not registered.
Please advise.
Best regards,
Vishal (2 Replies)
Discussion started by: admin_db
2 Replies
LEARN ABOUT NETBSD
mlxctl
MLXCTL(8) BSD System Manager's Manual MLXCTL(8)
NAME
mlxctl -- Mylex DAC960 family management utility
SYNOPSIS
mlxctl [-f dev] [-v] [-a] status [drive] [...]
mlxctl [-f dev] [-a] detach [drive] [...]
mlxctl [-f dev] [-a] check [drive] [...]
mlxctl [-f dev] rebuild channel:target
mlxctl [-f dev] cstatus
mlxctl [-f dev] rescan
mlxctl [-f dev] config
DESCRIPTION
The mlxctl utility performs status monitoring and management functions for Mylex DAC960 RAID controllers and attached devices.
The following options are available:
-a Apply the action to all drives attached to the controller.
-f dev Specify the control device to use. The default is /dev/mlx0.
-v Increased verbosity.
The following commands are available:
cstatus Display the controller's current status.
status Display the status of the specified drives. This command returns 0 if all drives tested are online, 1 if one or more drives are
critical and 2 if one or more are offline.
rescan Re-scan the logical drive table, and attach or detach devices from the system as necessary.
detach Detach the specified drives. Drives must be unmounted and unopened for this command to succeed.
check Initiate a consistency check and repair pass on a drive that provides redundancy (e.g., RAID1 or RAID5). This command returns imme-
diately. The status command can be used to monitor the progress of the check.
rebuild Rebuild onto the specified physical drive. Note that there can be only one running rebuild operation per controller at any given
time. This command returns immediately. The cstatus command can be used to monitor the progress of the rebuild.
config Write the current system drive configuration to stdout.
EXAMPLES
Display the status of drive ld3 attached to the controller mlx1:
mlxctl -f /dev/mlx1 -v status ld3
SEE ALSO
ld(4), mlx(4)
HISTORY
The mlxctl command first appeared in NetBSD 1.5.3, and was based on the mlxcontrol utility found in FreeBSD.
BUGS
Modifying drive configuration is not yet supported.
Some commands do not work with older firmware revisions.
Error log extraction is not yet supported.
BSD
April 10, 2000 BSD