03-09-2009
Unable to mount/find new drives
Hi, I work offshore and we have a system that records excessive amounts of data (Terabytes), therefore we changed the 16 x 400GB drives to 16 x 1TB drives. However, since doing this, upon bootup, the system does not recognize the new drives. These drives are external drives in a chassis which is connected to the computer via SCSI lead. See quote below email to IT assistant:
Quote:
Yesterday we switched the drive chassis off and changed the hard drives from 400 GB to 1 TB. We then switched the chassis back on and it initialized itself which took 6 hours. We did not switch off the computer at all.
We then tried to reboot the computer and the following message keeps coming up
Quote:
No such file or directory while trying to open / dev/vol1/raid1
/dev/vol1/raid1:
The superblock could not be read or does not describe a correct ext2 file system. If the device is valid and it really contains an ext2 file system (and not swop or ufs or something else), then the superblock is corrupt and you might try running e2fsck with an alternate superblock
e2fsck -b 8193 <device> [ failed ]
it then come up with alt d for maintenance menu or enter to re-boot
Any help would be appreciated,
Kind regards
Russ
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Hi, I'm stuck in an awkward situation please help :)
I have two identical Seagate 80GB harddrives.
My objective is a bit strange.
1.I want to have a cloned disk as bootable backup
2.When booting using the master drive, I also want to mount the cloned backup disk so I can do incremental... (6 Replies)
Discussion started by: onthetopo
6 Replies
2. Solaris
Hi All,
I need help on this issue and it is a production server.
/usr is unable to mount and make system can't even type any commands.
Only this show and no changes makes to the system.
ERROR: svc:/system/filesystem/root:default failed to mount /usr (see 'svcs -x'
for details) ... (3 Replies)
Discussion started by: mailbox80
3 Replies
3. Solaris
Hi,
I am running Solaris 8 on a V880 which has recently crashed. It has got a fibre connection to a StorageTrek array containing my database info. Since the crash I have been unable to mount the 2 metadevices which correspond to /spool & /apps - these FS's contain my db info and theredore I... (20 Replies)
Discussion started by: Duffs
20 Replies
4. Fedora
Hi,
I'm new for unix. I tried to mount windows NTFS partition in Fedora unix, but it is saying ntfs not found. The command i used is
mount /dev/sdb1 -t ntfs /mnt/drive1
and how to find the available filesystem type?. (1 Reply)
Discussion started by: gwgreen1
1 Replies
5. Shell Programming and Scripting
Hi there
i need a way ( some sort of script maybe) to check if a mont point exist when but the physical drive does not
for example if i look in / and see that user_data2 directory exist but there is no user_data2 drive.
another hurdle would be that some of the machines have raided drives... (3 Replies)
Discussion started by: ab52
3 Replies
6. Solaris
had a D1000 connected to this Solaris10 server, for a while, everything worked good ..until today..
it can't find the other half of D1000 disks at all..all LEDs on the D1000 are in green..kept getting the below:
Dec 19 17:10:34 tocbs103 glm: WARNING: ID
Dec 19 17:10:34 tocbs103 scsi: ... (2 Replies)
Discussion started by: ppchu99
2 Replies
7. UNIX for Dummies Questions & Answers
Hi
I have created a RHEL6 machine that is hosted on VMWare player that in turn runs off my Windows 7 PC.
When I try and mount the CDROM on the RHEL6 box I get the following output:
$ mount /dev/cdrom/media
mount: can't find /dev/cdrom/media in /etc/fstab or /etc/mtab
$
Here is the... (3 Replies)
Discussion started by: accipiter1
3 Replies
8. UNIX for Dummies Questions & Answers
hi
Am trying to mount a cdrom which has a blank cd into it, using the command:
mount -v cdrfs -o ro /dev/cd0 /mnt
Am getting this error:
# df -Ig
Filesystem GB blocks Used Free %Used Mounted on
/dev/hd4 0.50 0.19 0.31 38% /
/dev/hd2 ... (1 Reply)
Discussion started by: kamaldev
1 Replies
9. Red Hat
Hi,
I am unable to mount the AIX share on Red Hat Linux 5.5
getting below error on linux server while mounting.
reason given by server: unknown nfs status return value: -1
I have checked on AIX side.
lssrc -g nfs showing below output.
bash-3.00# lssrc -g nfs
Subsystem ... (2 Replies)
Discussion started by: manoj.solaris
2 Replies
10. UNIX for Dummies Questions & Answers
Hello,
While mounting NFS below error is coming:
# mount -t nfs 10.65.150.69:/lvsnap /lvsnap
mount: mount to NFS server '10.65.150.69' failed: RPC Error: Program not registered.
Please advise.
Best regards,
Vishal (2 Replies)
Discussion started by: admin_db
2 Replies
LEARN ABOUT REDHAT
tapeinfo
TAPEINFO(1) General Commands Manual TAPEINFO(1)
NAME
tapeinfo - report SCSI tape device info
SYNOPSIS
tapeinfo -f <scsi-generic-device>
DESCRIPTION
The tapeinfo command reads various information from SCSI tape drives that is not generally available via most vendors' tape drivers. It
issues raw commands directly to the tape drive, using either the operating system's SCSI generic device ( e.g. /dev/sg0 on Linux,
/dev/pass0 on FreeBSD) or the raw SCSI I/O ioctl on a tape device on some operating systems.
One good time to use 'tapeinfo' is immediately after a tape i/o operation has failed. On tape drives that support HP's 'tapealert' API,
'tapeinfo' will report a more exact description of what went wrong.
Do be aware that 'tapeinfo' is not a substitute for your operating system's own 'mt' or similar tape driver control program. It is intended
to supplement, not replace, programs like 'mt' that access your operating system's tape driver in order to report or set information.
OPTIONS
The first argument, given following -f , is the SCSI generic device corresponding to your tape drive. Consult your operating system's doc-
umentation for more information (for example, under Linux these are generally start at /dev/sg0 under FreeBSD these start at /dev/pass0).
Under FreeBSD, 'camcontrol devlist' will tell you what SCSI devices you have, along with which 'pass' device controls them. Under Linux,
"cat /proc/scsi/scsi" will tell you what SCSI devices you have.
BUGS AND LIMITATIONS
This program has only been tested on Linux with a limited number of tape drives (HP DDS4, Seagate AIT).
AVAILABILITY
tapeinfo is currently being maintained by Eric Lee Green <eric@badtux.org> formerly of Enhanced Software Technologies Inc. The 'mtx' home
page is http://mtx.sourceforge.net and the actual code is currently available there and via CVS from http://sourceforge.net/projects/mtx/ .
SEE ALSO
mt(1),mtx(1),scsitape(1)
TAPEINFO1.0 TAPEINFO(1)