03-03-2009
Try "cfgmgr -v - i /dev/cd0" with the installation media located in the cdrom device. It will force AIX to look for the appropriate drivers in the installation media.
10 More Discussions You Might Find Interesting
1. Solaris
Hi,
I have a problem with a server disconnecting from the network.
This is a SUN box with dual NIC's running Solaris 8.
We have a Nokia router that routes traffic but it's virtual address doesn't respond to pings. When the SUN box sends out a ping, if nothing comes back it will shut down... (5 Replies)
Discussion started by: m_smith
5 Replies
2. IP Networking
I have one 4GB, dual port HBA. Is each port rated for 4GB, or is it the whole HBA rated for 4GB?
Also, how do I determine which is port0 / port1 with "lscfg -vl fcs0" command. Thanks. (0 Replies)
Discussion started by: jwholey
0 Replies
3. Solaris
Greetings Forumers!
I am running into an issue with multiple zones on an M5000 with 2 NICs. The NICs are on separate VLANs. These zones are using the 2 NICs to communicate with other systems but when they need to communicate with a zone on the same system, but different NIC, the application... (9 Replies)
Discussion started by: bluescreen
9 Replies
4. AIX
All
I am at a loss with a VIO server running ios 2.2.0.10-FP-24 SP-01. The VIO server is fitted with two 8Gb PCI Express Dual Port FC Adapters. However when I run the lsnports command only two of the adapter ports show as capable:
$ lsnports
name physloc ... (4 Replies)
Discussion started by: johnf
4 Replies
5. Solaris
I couldn't install my nic in solaris 10. I compiled and added
the driver but failed to attach the driver and ifconfig output
shows only loopback dev. Please see the following output and tell
me whether my nic has been detected and why the driver failed to
attach?
My nic is detected in linux... (0 Replies)
Discussion started by: vectrum
0 Replies
6. Red Hat
Dear All
I want tune my NIC's rps, rfs and xps value.
In my system I have two NIC (eth0, eth1) and I have a bond0 ( eth0, eth1).
Here is the question? Which device should I modify ?
eth0 and eth1? or just modify bond0 or modify all device (eth0, eth1, bond0)
Any advice is welcome.... (0 Replies)
Discussion started by: nnnnnnine
0 Replies
7. AIX
Hi,
From the man page, cfgmgr configures devices and optionally installs device software by running the programs specified in the Configuration Rules object class and it is not dependent on platform .
Are there any fundamental differences impacting the speed of cfgmgr on a stand-alone and... (5 Replies)
Discussion started by: Sachin1987
5 Replies
8. AIX
NIC port is down on IBM Frame. From the back its slot C7/C8. The network switch is the problem, and a new switch will be coming into play. There's one VIO and one LPAR.
How do i tell the port is down in the OS on the VIO? And how can i verify it's backup without pulling cables? We have a... (1 Reply)
Discussion started by: gps1976
1 Replies
9. Solaris
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
10. Linux
Hello Admins,
My ask is how can I add two different subnet IPs to same box with two different gateways?
The issue is I can connect to the box when I am on ethernet LAN, but I am not able to connect to the same IP when I am on wifi. The server is RHEL 7 VM on vmware.
How can I get connected... (4 Replies)
Discussion started by: snchaudhari2
4 Replies
LEARN ABOUT OPENSOLARIS
patchmedia
patchmedia(1M) System Administration Commands patchmedia(1M)
NAME
patchmedia - modify Solaris media with patches and packages
SYNOPSIS
/usr/bin/patchmedia -d media-root [-v] [-o iso] [-l label]
pkg_or_patch [pkg_or_patch ...]
DESCRIPTION
The patchmedia utility takes a list of patches and packages as input and updates the install miniroot in media-root (the root directory of
an on-disk image of a Solaris installation media) to include the specified patches and packages. These patches and packages are also placed
in a subdirectory called DU under the Solaris install image. For example:
media-root/Solaris_10/DU
When booting a system from the updated media, the patches and packages will be part of the booted Solaris image. They will also be applied
to the target system being installed at the end of the installation process.
If -o is specified, a bootable ISO image is created in the file media.iso that contains the Solaris install media. The ISO image can then
be burned onto a CD/DVD with utilities such as cdrw(1) or cdrecord(1). (The latter is not a SunOS man page.)
OPTIONS
The following options are supported:
-d media-root
Top-level directory of on-disk image of Solaris installation media. This is option must be specified.
-o iso
Create a Solaris ISO image of media-root.
-l label
Label/volume name of the ISO image (if -o option is specified). If -o is not specified, the name of Solaris directory under media-root,
for example, Solaris_10, will be used.
-v
Verbose. Multiple -v options increase verbosity.
OPERANDS
The following operands are supported:
pkg_or_patch [pkg_or_patch ...]
One or more patches or packages (you can have both patches and packages in a single command) with which the Solaris installation media
media-root will be updated.
EXAMPLES
Example 1 Updating a Solaris Install Image with Patch and Package
The following command updates the Solaris install image in s10u1 by adding patch 123456-07 and package SUNWfoo.
# /usr/bin/patchmedia -d s10u1 SUNWfoo 123456-07
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Committed |
+-----------------------------+-----------------------------+
SEE ALSO
cdrw(1), mkcd(1M), attributes(5)
mkisofs(8), (/usr/share/man/man8/mkisofs.8), in the SUNWfsman package (not a SunOS man page)
SunOS 5.11 29 Jul 2008 patchmedia(1M)