Ifconfig output - help understanding flags 'Smart, Simplex', etc Post: 302276730

9 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

flags to suppress column output, # of rows selected in db2 sql in UNIX

Hello, I am new to db2 SQL in unix so bear with me while I try to explain the situation. I have a text file that has the contents of the where condition that I am using for a db2 SQL in UNIX ksh. Here is the snippet. if ; then echo "Begin processing VALUEs" ...

2. IP Networking

arp output (flags)

I'm running an arp -an on a Solaris 10 box. We're using IPMP. One of the systems is not able to see a host on the same network. The only difference between the two systems (one is having a problem, the other isn't) at least so far is the output of arp: # arp -an | grep 224.55 e1000g5...

3. Shell Programming and Scripting

Understanding the output of TOP

ok, so I have a script im running on a linux box that uses "egrep" a lot. now, when i run this script, i check the TOP to see how much system resource it is using. the "top" command gives the following output: last pid: 25384; load avg: 1.06, 1.04, 0.76; up 351+06:30:24 ...

4. UNIX for Dummies Questions & Answers

Explain the difference between the commands cd ~smart and cd ~/smart

Is it possible for both commands to work?

5. UNIX for Dummies Questions & Answers

Understanding nm command output

After running nm command on any object file from out put can we get to know that wheather a symbol is a call to a function or definition of function ? I am searching a class and function definitions inside many .so files. I have 3 files which contain the symbol but I don't know wheather they...

6. Shell Programming and Scripting

parsing ifconfig output

I'm trying to gather information on the interfaces on a large number of servers. If I run ifconfig I will get: eth0 Link encap:Ethernet HWaddr 00:50:56:A2:27:C1 inet addr:10.145.xxx.xxx Bcast:10.152.45.255 Mask:255.255.254.0 ----- eth1 Link...

7. UNIX for Dummies Questions & Answers

Ifconfig Flags

Hi there, I need your help in understanding the below Solaris 10 ifconfig output; athnetspns02>ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 e1000g0:...

8. Shell Programming and Scripting

Grabbing IP and zonename from multiline 'ifconfig' output

Hi There, I have a Solaris server that has a bunch of zones configured and I am trying to write a script that will take all interfaces other than the loopback ones (e.g. lo0:3 etc) and present them so that I can easily determine the zone that owns the IP So in the case of the following...

9. Red Hat

Command understanding the output file destination in case of standard output!!!!!

I ran the following command. cat abc.c > abc.c I got message the following message from command cat: cat: abc.c : input file is same as the output file How the command came to know of the destination file name as the command is sending output to standard file.

LEARN ABOUT NETBSD

ciss

CISS(4) 						   BSD Kernel Interfaces Manual 						   CISS(4)

NAME

     ciss -- HP/Compaq Smart ARRAY 5/6 RAID controllers

SYNOPSIS

     ciss* at pci? function ?

DESCRIPTION

     The ciss driver provides support for the CISS interface implemented by fifth and later generations of the HP/Compaq Smart ARRAY family of
     controllers.

     The CISS interface is defined in the document entitled CISS Command Interface for SCSI-3 Support Open Specification, Version 1.04, Valence
     Number 1, Compaq Computer Corporation, 2000/11/27.

     This driver supports several Compaq and HP controllers implementing the CISS interface, including:

     o	 Compaq Smart Array 5300 version 1
     o	 Compaq Smart Array 5300 version 2
     o	 Compaq Smart Array 5i version 1
     o	 Compaq Smart Array 5i version 2
     o	 HP Smart Array 5312
     o	 HP Smart Array 6i
     o	 HP Smart Array 641
     o	 HP Smart Array 642
     o	 HP Smart Array 6400
     o	 HP Smart Array 6400 EM
     o	 HP Smart Array E200
     o	 HP Smart Array E200i
     o	 HP Smart Array P400
     o	 HP Smart Array P400i
     o	 HP Smart Array P600
     o	 HP Smart Array P800
     o	 HP Smart Array V100
     o	 HP Smart Array 1 through 13

     These controllers support RAID 0, RAID 1, RAID 5, JBOD, and superpositions of those configurations.

     Although the controllers are actual RAID controllers, the ciss driver makes them look just like SCSI controllers.	All RAID configuration
     must be done through the controllers' BIOSes.

     Hardware from previous generations of this product family may be supported by the cac(4) driver.

SEE ALSO

     bio(4), cac(4), intro(4), pci(4), scsi(4), sd(4)

HISTORY

     The ciss driver first appeared in NetBSD 3.1.

AUTHORS

     The ciss driver was written by Michael Shalayeff <mickey@openbsd.org>, and ported to NetBSD by Tonnerre Lombard <tonnerre@netbsd.org>.

BSD
								   May 28, 2008 							       BSD