USB serial help needed Post: 302238891

10 More Discussions You Might Find Interesting

1. Linux

Linux serial port connectivity help needed

Hai I am newbie to linux and I like know how can we connect linux with unix dump terminal. another thing is that whether I can get graphics in serial port connection using hyperterminal from windows. rgds sunil

2. Linux

modem - usb to serial configuration

I have a serial modem connected to a usb port using an adapter cable. The system is a HP DL360. RedHat ES3.0 I am using the device /dev/ttyUSB0 When I issue the command "mgetty ttyUSB0" I get the following output in the log file. How do I get the system to see the modem. 12/02 14:17:55...

3. Programming

Accessing device with Prolific USB-serial controller.

I am trying to access DG-100 gps logger on Mac OS X with POSIX API. The device uses a Prolific usb-serial controller, and connect to the usb port on my mac. After I install the Prolific driver, it shows up as /dev/tty.usbserial and /dev/cu.usbserial. The vendor has published the data format. So...

4. SCO

Usb To Serial (sco6)

According to sco6 usb supplement, once you install it, you can install a bafo industries (BF-810) in the computer. I have done all that and followed the intructions completely and it shows up using usbprobe and l /dev/usb_ser* Problem is that when I go to mkdev serial, it is not there. Anyone...

5. Solaris

Usb to serial connection to Sun Enterprice 450

Hi all, I must connect my PC (Windows 2000) to Sun Enterprise 450 (4 X UltraSPARC-II 400Mhz) for Solaris 10 Installation. My PC doesn't have a serial port therefore I must use USB port. How can I connect USB port of my PC to the serial port (DB 25) of Sun 450? Will be there any problems with...

6. Solaris

Forcing OpenBoot: H/W Solution to no <BREAK> function on USB Serial

Please note: This solution does require some soldering ability. If, like me today, you really really need to get into OpenBoot on a non booting Solaris machine (in my case an Ultra 5) but your USB dongle won't send <BREAK> then here is a -really- simple hardware hack that works a treat: ...

7. Solaris

USB to Serial Adapter connection

Hi Community, I'm working on Sun Server V490 with my PC (with OS Vista). I'm using a USB to Serial Adapter to connect to Server directly. I've this problem, I'm connecting to Server with Putty client with this settings: boud rate 9600, 8 bit, 0 parity, 0 flow control, but after to have typed...

8. Hardware

How to install a driver of my USB-A to Serial Cable

Hi Gurus of Unix Recently I install a OpenSolaris in My HP 530 In this moment want to install a USB-A to Serial Cable. Any guru can send a Link where I can use how reference. I want to configure a Router and my PC don't have any serial Port. My LapTOP only has USB ports. In this case I buy a...

9. Solaris

Solaris 11.2 does not assign serial port to 3g usb modem?

In ubuntu etopic i create this udev rules for prolink 3g usb modem: SUBSYSTEM=="block", SUBSYSTEM=="scsi", ATTRS{idVendor}=="1e0e", ATTRS{idProduct}=="f000", ACTION=="add", RUN+="/sbin/modprobe usbserial Vendor=0X1e0e Product=0Xf000" After plugging the usb modem, ubuntu assigns the ports...

10. Linux

Connect from USB to serial port of switch

I have someone wanting to connect to the serial management port of a switch from a PC running CentOS6. The management port on the switch is apparently baud 9600, 8 data bits, 1 stop bit & no parity They have plugged in a cable to connect and the output from lsusb is:-Bus 001 Device 001: ID...

LEARN ABOUT NETBSD

url

URL(4)							   BSD Kernel Interfaces Manual 						    URL(4)

NAME

     url -- Realtek RTL8150L USB Ethernet driver

SYNOPSIS

     url*    at uhub?
     urlphy* at mii?

DESCRIPTION

     The url driver provides support for USB Ethernet adapters based on the Realtek RTL8150L USB-ether bridge chip.

     The url driver supports the following adapters:

	   CompUSA USBKR100
	   GreenHouse GH-USB100B
	   Melco Inc. LUA-KTX
	   Sitecom LN013

     For more information on configuring this device, see ifconfig(8).

DIAGNOSTICS

     url%d: watchdog timeout  A packet was queued for transmission and a transmit command was issued, however the device failed to acknowledge the
     transmission before a timeout expired.

     url%d: no memory for rx list  The driver failed to allocate an mbuf for the receiver ring.

SEE ALSO

     arp(4), mii(4), netintro(4), usb(4), ifconfig(8)

HISTORY

     The url device driver first appeared in NetBSD 1.6.

AUTHORS

     The url driver was written by Shingo WATANABE <nabe@nabechan.org>.

BSD
								September 18, 2006							       BSD