Anyone have tips on configuring the 2.6.10 kernel to take full advantage of dual 2.4 Ghz Xeons?
I'm not getting expected benchmark results.... and seemingly was better off with a single 2600+ AMD processor. (1 Reply)
Hi All,
When ever am rying to connect to the database using isqlrf from the command prompt i get the following error
Error -350 is Index already exists on column.
What could be the possible reason and a solutin for this ?
AM using freeBSD
Thanks in advance (0 Replies)
Hi, I am experiencing troubles with dual monitors in fedora 16. During boot time both monitors are working, but when system starts one monitor automatically shut down. It happend out of the blue. Some time before when I updated system this happend but then I booted older kernel release and... (0 Replies)
Discussion started by: wakatana
0 Replies
LEARN ABOUT NETBSD
ciss
CISS(4) BSD Kernel Interfaces Manual CISS(4)NAME
ciss -- HP/Compaq Smart ARRAY 5/6 RAID controllers
SYNOPSIS
ciss* at pci? function ?
DESCRIPTION
The ciss driver provides support for the CISS interface implemented by fifth and later generations of the HP/Compaq Smart ARRAY family of
controllers.
The CISS interface is defined in the document entitled CISS Command Interface for SCSI-3 Support Open Specification, Version 1.04, Valence
Number 1, Compaq Computer Corporation, 2000/11/27.
This driver supports several Compaq and HP controllers implementing the CISS interface, including:
o Compaq Smart Array 5300 version 1
o Compaq Smart Array 5300 version 2
o Compaq Smart Array 5i version 1
o Compaq Smart Array 5i version 2
o HP Smart Array 5312
o HP Smart Array 6i
o HP Smart Array 641
o HP Smart Array 642
o HP Smart Array 6400
o HP Smart Array 6400 EM
o HP Smart Array E200
o HP Smart Array E200i
o HP Smart Array P400
o HP Smart Array P400i
o HP Smart Array P600
o HP Smart Array P800
o HP Smart Array V100
o HP Smart Array 1 through 13
These controllers support RAID 0, RAID 1, RAID 5, JBOD, and superpositions of those configurations.
Although the controllers are actual RAID controllers, the ciss driver makes them look just like SCSI controllers. All RAID configuration
must be done through the controllers' BIOSes.
Hardware from previous generations of this product family may be supported by the cac(4) driver.
SEE ALSO bio(4), cac(4), intro(4), pci(4), scsi(4), sd(4)HISTORY
The ciss driver first appeared in NetBSD 3.1.
AUTHORS
The ciss driver was written by Michael Shalayeff <mickey@openbsd.org>, and ported to NetBSD by Tonnerre Lombard <tonnerre@netbsd.org>.
BSD May 28, 2008 BSD