df -k output in Solaris 10 Post: 302154823

9 More Discussions You Might Find Interesting

1. Programming

fixed-width printf() output on an XmList on Solaris

This one is a bit of bugger and I'm not sure if it's entirely relevant to this board but here goes... I'm trying to produce some fixed width output to a List widget (X11/Motif GUI) So, I use something similar to: sprintf(Buffer, "%*d%*f", 20, some_integer, 20, some_float); This gives me a...

2. Solaris

gcc output size differs on same version of solaris

Hello everybody, I am having two machines. I am using g++v2.95 When I do the build,the size of output file on both machines differ. I am not able to find what can be the problem. Both the machines are solaris 5.6 The command is : g++ -c -g -I./ -I../../../include -I/usr/local/include/g++-3...

3. Solaris

Solaris 'format' output without args...?

Can't remember for the life of me, but how does one get the Solaris 'format' command output (in its entirety) without having to hit <enter> or <space> for subsequent disk listings? I recall a ksh script that got me by a few years ago, but it's long gone from my memroy now...

4. Solaris

how to view explorer output in solaris

Hi, I want to run pkg something called SUNWexplorer and find the output. Where i can find the pkg?

5. Solaris

solaris 10 strange df output

hi, in solaris 10 SUN SPARC V245 server the following df -h output is showing . can i reuse the following disk space by deleting them /platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap1.so.1 20G 5.2G 14G 27% /platform/sun4u-us3/lib/libc_psr.so.1...

6. Solaris

How can I output all previous Unix commands in Solaris to a file??

Hello friends: I login to solaris with a username/Password and I can see quite a lot of previous I use dbefore, it accumulates a lot, I hope to output them into a Command.txt file as reference, not copy/paste 1 by 1, is there any way I can collect all commands in batch then put into a file, ...

7. Solaris

Strange df output on solaris 9

Hi all, After deleting some large log files on solaris 9 machine I can see strange df output shows below /dev/vx/dsk/rootvol 45G 16384E 50G 39879076698694% / I thought it will back to normal once I restart it but did not. I have seen in sunsolve article 6362734 that "Solaris 8...

8. Solaris

Solaris Crontab & TOP output

Hello Guru's I'm trying to take the output of solaris top command and output to a txt file every few minutes. The issue that I'm experiencing is that I can run the following: #!/bin/bash # logfile="/usr/mvf/morris/top.log" # echo...

9. Solaris

Different VMSTAT output on Linux and Solaris machines

Hi, I am porting a piece of code from Solaris to Linux. Code uses VMSTAT command. On Solaris machine VMSTAT output is following: uname -a: SunOS rgsm01 5.9 Generic_118558-03 sun4u sparc SUNW,Sun-Fire-V440 vmstat: kthr memory page disk faults cpu r b w swap free re mf pi po fr de sr m1 m2...

LEARN ABOUT NETBSD

urlphy

URL(4)							   BSD Kernel Interfaces Manual 						    URL(4)

NAME

     url -- Realtek RTL8150L USB Ethernet driver

SYNOPSIS

     url*    at uhub?
     urlphy* at mii?

DESCRIPTION

     The url driver provides support for USB Ethernet adapters based on the Realtek RTL8150L USB-ether bridge chip.

     The url driver supports the following adapters:

	   CompUSA USBKR100
	   GreenHouse GH-USB100B
	   Melco Inc. LUA-KTX
	   Sitecom LN013

     For more information on configuring this device, see ifconfig(8).

DIAGNOSTICS

     url%d: watchdog timeout  A packet was queued for transmission and a transmit command was issued, however the device failed to acknowledge the
     transmission before a timeout expired.

     url%d: no memory for rx list  The driver failed to allocate an mbuf for the receiver ring.

SEE ALSO

     arp(4), mii(4), netintro(4), usb(4), ifconfig(8)

HISTORY

     The url device driver first appeared in NetBSD 1.6.

AUTHORS

     The url driver was written by Shingo WATANABE <nabe@nabechan.org>.

BSD
								September 18, 2006							       BSD