I'm running a Ultra 60 and having problems booting from the cdrom. This is the error I get,
Boot device: /pci@1f,4000/scsi@3/disk@6,0:f File and args:
The file just loaded does not appear to be executable.
Any know what could be the problem here? I've even tried connecting a 2nd cdrom... (3 Replies)
Hi Everyone,
I have a problem. I'm trying too reinstall sun solaris 8.0 on may Sunfire 280r but solaris 9.0 is all ready installed. I tried to boot from cd rom it keeps telling me that File does not seem executable. I need to get Solaris 8.0 on this system. I have boot all ready in single mode... (4 Replies)
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
I want to install Solaris 9 on SUN ULTRA 10. The cdrom is attached to an ide controller. The server is currently running Solaris 2.6
I insert Solaris cd 1 of 2 and at the ok prompt I type boot cdrom i get the error below
Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f file and args:... (11 Replies)
Hi all am trying to boot the system from cdrom in single user mode , however when i am giving command boot cdrom -s i am getting below error
Boot Device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0: f file and args:
Can't read disk label
Can't open disk label package
can,t open boot device
... (17 Replies)
iam traying to install o/s in spark machine it showing error
ok >boot cdrom
is showing error
short disk read
failed to read superblock
the file just loaded does not appear to excutable
how to solve this can u help me (6 Replies)
I have a server with a scsi raid controller (for hard drives) and a scsi controller (for tape drive and cd-rom). I am trying to boot from the cd-rom but can't. During boot up, bootable media is detected in the cd-rom but the system will not boot from it. BIOS for the raid controller installs but... (1 Reply)
Good Afternoon,
I'm trying to boot from cdrom so I:
bash-2.05# init 0
{1} ok boot cdrom -s and I get:
Rebooting with command: boot cdrom -s
Boot Device: /pci@1e,600000/ide@d/cdrom@2,0:f File and args: -s
Can't read disk label.
Can't open disk label package
Evaluating:
Can't open boot... (13 Replies)
Discussion started by: Stellaman1977
13 Replies
LEARN ABOUT MINIX
reboot
REBOOT(2) System Calls Manual REBOOT(2)NAME
reboot - close down the system or reboot
SYNTAX
#define _MINIX_SOURCE 1
#include <unistd.h>
int reboot(int how, ...)
DESCRIPTION
Reboot() is used to close down the system. It allows several ways of shutting down depending on how:
reboot(RBT_HALT)
Halt the system and return to the monitor prompt.
reboot(RBT_REBOOT)
Reboot the system by letting the monitor execute the "boot" command.
reboot(RBT_PANIC)
Cause a system panic. This is not normally done from user mode, but by servers using the sys_abort() kernel call.
reboot(RBT_MONITOR, code, length)
Halt the system and let the monitor execute the given code of the given length. (code is of type char * and length of type size_t.)
reboot(RBT_RESET)
Reboot the system with a hardware reset.
Reboot() may only be executed by the super-user.
DIAGNOSTICS
If the call succeeds, it never returns. If something went wrong, the return value is -1 and an error is indicated by errno.
SEE ALSO shutdown(8), reboot(8), halt(8), sync(1).
NOTES
Minix can not return to the monitor if running in real mode, or if started from MS-DOS. This means that most of the reboot functions will
change to a reset.
AUTHOR
Edvard Tuinder (v892231@si.hhs.NL)
REBOOT(2)