Sponsored Content
Full Discussion: Can't open boot device
Operating Systems Solaris Can't open boot device Post 302094986 by mayewil on Thursday 2nd of November 2006 11:02:55 AM
Old 11-02-2006
Can't open boot device

I have a real emergency. I have a Sun Fire V240 UltraSparc server and am connected via the Serial Mgmnt Port with a Laptop. I have been building an Oracle database on it for the past couple months, not getting very far along with it , when suddenly, the system had a fatal crash. I've lost the shadow file, the passwd file, and cannot even boot up the system now.. I have resorted to attempting to boot from the Operating System CD labeled: 1/06 Solaris 10 Oprerating System for x64/x86 DVD. Packaged with the server were also other DVD's, one labeled: 1/06 Solaris 10 Operating System for Sparc DVD. I don't know which one is correct, but neither one will allow me to get ahold of the op sys. I cannot get passed the password prompting except for the sc mode for ALOM, then from there, to the ok prompt, then I'm back where I started-->> having to reboot. That doesn't help me at all. Very little functionality available there. Here are a few error messages when booting up:
ok boot cdrom s
Boot device: /pci@1e,600000/ide@d/cdrom@0,0:f File and args: s
Bad magic number in disk label
Can't open disk label package

Can't open boot device

ok <prompt>
Please --->>somebody help me!!!!!!!!!!!!!!!!!!!!!
 

10 More Discussions You Might Find Interesting

1. Solaris

cannot find boot device and won't boot off cdrom

I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
Discussion started by: kymberm
3 Replies

2. Solaris

ERROR: Can't open boot-device

Hi i need help pls ... Server type sun fire 3800 I need to install solaris 9 . When i boot the system i recieve the following : System Controller 'sunfire3800': Type 0 for Platform Shell Type 1 for domain A console Type 2 for domain B console Type 3 for... (5 Replies)
Discussion started by: tt155
5 Replies

3. Solaris

question about opb boot device

hi all: I have a sun blade-1000 for labs only, with 73G hd loaded, which boot block installed on slice 0. I'm confused by setting "boot-device" value in obp, which my question as follow: in ok mode, I got device alias like this: disk0: /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@2,0 as I know the... (4 Replies)
Discussion started by: netshu
4 Replies

4. Boot Loaders

Reboot and Select Proper Boot device or insert Boot media in select Boot device and press a key

Hello, I have kubuntu on my laptop and now I decided to switch to Windows 7. I made the bios settings properly (first choice is boot from cd\vd) but I see the error " reboot and select proper Boot device or insert Boot media in select Boot device and press a key " I have tried CD and... (0 Replies)
Discussion started by: rpf
0 Replies

5. Solaris

"Can't open boot device" error !!

I've a Sun V440 machine, and it's running solaris 10 .. for some reason i need to install a fresh copy of solaris 10. for that i've prepared solaris 10 dvd but surprisingly i found there is no any dvd rom on this machine, so i've took a dvd rom from a V240 machine and inserted on V440. after... (3 Replies)
Discussion started by: Anti_Evil
3 Replies

6. Solaris

How to know what is the boot device?

Hello, I am wondering which commend /file to check to find out what is the boot device? regards Ahmed Egypt (1 Reply)
Discussion started by: ahmedamer12
1 Replies

7. Solaris

Can't open boot device

I installed a new hard drive completely blank. sun blade 150 openboot 4.10.6 message: Boot device: disk:a File and args: Bad magic number in disk label Can't open label package Evaluating: Can't open boot device (15 Replies)
Discussion started by: janiper
15 Replies

8. Solaris

Can't open boot device..

Hello Forum, I'm really in a fix now, I'm getting this error message now, seems like the boot block is damaged? When I do probe-all the system freezes... Can any one guide me as what to do next? System is Solaris 8 running Open Boot PROM 4 System also does not have a cd/dvd rom drive... ... (17 Replies)
Discussion started by: br1an
17 Replies

9. HP-UX

Failed to open tape device /dev/rmt/0mn:Device busy (errno = 16)

Hi, Unable to make tape backup, please help. /opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00 * Creating local directories for configuration files and archive. ======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery. (Mon... (4 Replies)
Discussion started by: anuragr
4 Replies

10. AIX

Is my XIV device open?

Hi there, I am trying to determine if a specific XIV LUN on AIX is in OPEN or CLOSED state. I would like tthe same info as I can get from pcmpath command on v7000 LUN-s. I would need this info to find out if I can safely delete a LUN or not. I tried fuser command, but no luck. It did not... (6 Replies)
Discussion started by: trifo75
6 Replies
mkcd(1M)						  System Administration Commands						  mkcd(1M)

NAME
mkcd - create bootable Solaris ISO image SYNOPSIS
/usr/bin/mkcd -v [-l label] media-root iso DESCRIPTION
The mkcd utility takes media-root (the root of an on-disk Solaris install media) as input and creates a bootable Solaris ISO image in the file iso, using mkisofs(8). The file can then be burned onto a CD/DVD with utilities such as cdrw(1) or cdrecord(1). (Neither mkisofs(8) nor cdrecord(1) are SunOS man pages.) Caution - The directory tree media-root must contain the file boot/grub/stage2_eltorito, which will be written to the media boot sectors. This file will be modified with some boot information, thus it must be writable. If necessary, first save a copy prior to running this utility. OPTIONS
The following options are supported: -l label Sets label as the label/volume name of the ISO image. -v Verbose. Multiple -v options increase verbosity. OPERANDS
The following operands are supported: media-root Top-level directory of an on-disk Solaris install media. iso Name of the output file which will contain the resulting ISO image. EXAMPLES
Example 1 Creating an ISO Image and Burning a CD/DVD The following commands create an ISO image from the content of s10u1 and burn the image to a CD/DVD. # /usr/bin/mkcd s10u1 s10u1.iso # /usr/bin/cdrw -i s10u1.iso ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ |Interface Stability |Committed | +-----------------------------+-----------------------------+ SEE ALSO
cdrw(1), attributes(5) mkisofs(8), (/usr/share/man/man8/mkisofs.8), in the SUNWfsman package (not a SunOS man page) SunOS 5.11 25 Jul 2008 mkcd(1M)
All times are GMT -4. The time now is 09:51 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy