Installing a modem on a serial accelerator ports

Thread Tools Search this Thread
Top Forums UNIX for Dummies Questions & Answers Installing a modem on a serial accelerator ports
# 1  
Old 02-16-2001

I had been using a modem installed on a Digi accelerator port to dial in to an SCO open server r5 server. On monday it quit working and I realy don't know how it was installed and configured. I have tested the modem on a PC and it works. The port the modem is connected to is ttyB06 and I have verified the setting in the mpi utility. I have also tried to go through the steps outlined in the system admin guid. I can't get it to work, can U help?
# 2  
Old 02-20-2001
Installing a modem on a PC is very diffent than UNIX-like systems. Suggest you dive into topics such as getty and uugetty. This is one good place to start.
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Solaris 11.2 does not assign serial port to 3g usb modem?

In ubuntu etopic i create this udev rules for prolink 3g usb modem: SUBSYSTEM=="block", SUBSYSTEM=="scsi", ATTRS{idVendor}=="1e0e", ATTRS{idProduct}=="f000", ACTION=="add", RUN+="/sbin/modprobe usbserial Vendor=0X1e0e Product=0Xf000" After plugging the usb modem, ubuntu assigns the ports... (4 Replies)
Discussion started by: shamsat
4 Replies

2. OS X (Apple)

Renaming serial ports in unix

Hello everyone, this is my first post and I am by no means a unix expert, so I hope I explain my issue well. I'm on a mac (mac mini), 10.7. My question is about serial port names. I have an arduino microcontroller plugged in via usb, and every time the computer is shut down it gives the... (0 Replies)
Discussion started by: superliminal
0 Replies

3. HP-UX

Help with serial ports.

Hi, This is my first post here. I would like to ask: how to connect the barcode scanner to the serial port? What are the names in the system (in / dev) and serialport1 serialport0? Please help with this. Regards. (2 Replies)
Discussion started by: ftwojtek
2 Replies

4. Hardware

Serial connection CAT5 instead of RS232 and Null Modem or Straight cable.

Hello, I want to connect a VT520 terminal to p3 linux box. I have two questions regarding the connection. First, is it possible to use RJ45 instead of RS232 cable. (with DB9 pin to RJ45 and DB25 to RJ45 converter). Second point is that; do i need null modem cable or straight cable... (5 Replies)
Discussion started by: vectrum
5 Replies

5. AIX

serial modem connection

I configured the serial modem in my P6-550 AIX 5.3 box But i dont have telephone line. when I run the command # cu -l /dev/tty1 the output is as follows does it mean that my modem is responding to the command? can i say my serial port is working and communicating fine? Connected ... (3 Replies)
Discussion started by: pchangba
3 Replies

6. UNIX for Dummies Questions & Answers

Freeing up a serial port with a modem connected

I currently access a remote Unix server which has an external modem connected to one of it's serial ports (/dev/cua/b). At times, this server undergoes a hard reset and for some reason this disallows us from making use of the modem any longer. A hard reset of the modem always seems to fix the... (0 Replies)
Discussion started by: ebender1
0 Replies

7. Solaris

Communicate Serial Modem using non-Root user

Hi, I'm having a issue on communicating the serial GSM modem in Sun Solaris 5.9 To implement such connectiom, i'm using the "tip -115200 /dev/term/a" command and i successfully get the "connected" status And then i send a "AT" message and receive "OK" response from the modem :D Anyhow,... (0 Replies)
Discussion started by: darontan
0 Replies

8. Linux

modem - usb to serial configuration

I have a serial modem connected to a usb port using an adapter cable. The system is a HP DL360. RedHat ES3.0 I am using the device /dev/ttyUSB0 When I issue the command "mgetty ttyUSB0" I get the following output in the log file. How do I get the system to see the modem. 12/02 14:17:55... (2 Replies)
Discussion started by: jshoovie
2 Replies

9. Solaris

null modem serial cable for server testing

HI all, i still have a problem when using null modem to see the output from my server(sun ultra en 3000). i followed the instruction from the internet, but it is not working. 1. i am using db9(5 4, 2 rows,put in laptop serial port) and db25(13 12, 2 rows,put in (A) server serial port). 2.... (3 Replies)
Discussion started by: waterbear
3 Replies

10. Shell Programming and Scripting

PERL:controlling serial ports ?

Is it possible to write a perl program to controll the serial port? e.g. What iam trying to do, for a challenge is create a box with two lights. red and green, connect to a serial port and have a perl program to give me the options to turn on the red light or green light. Is this possilbe, can... (1 Reply)
Discussion started by: perleo
1 Replies
Login or Register to Ask a Question