10 More Discussions You Might Find Interesting
1. Red Hat
I am trying to change the setting of serial port baud rate in Red Hat Linux 5.9 by the following command.
>> stty 9600 cs8 -parenb -ixon -cstopb -echo -F /dev/ttyS0
The serial port will be used by our custom application in 2 separate servers which are the replica of one another.
The port setting... (2 Replies)
Discussion started by: Anjan Ganguly
2 Replies
2. Red Hat
I have 1 serial port (9 Pin) attached with my Linux server.If I give
$dmesg | grep tty , it provides me the following.
ttyS0 and ttyS1.
I have 1 COM port with my server mother board. I have 1 customized application
that requires this COM port to be used.
The parameter to be set for COM port... (4 Replies)
Discussion started by: Anjan Ganguly
4 Replies
3. Solaris
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
4. AIX
Hello, I need to test whether our product will work with GPFS filesystems and I have some questions regarding the setup:
1. Do I need to dedicate an entire hard disk if I want to have GPFS on it? Or can I somehow split a disk into 2 virtual disks, and only use 1 for gpfs?
2. If lspv returns... (4 Replies)
Discussion started by: bstring
4 Replies
5. Homework & Coursework Questions
1.) I am to write scripts that will be phasetest folder in the home directory.
2.) The folder should have a set-up,phase and display files
I have written a small script which i used to check for the existing users and their password.
What I need help with:
I have a set of questions in a... (19 Replies)
Discussion started by: moraks007
19 Replies
6. IP Networking
Hello,
I want to add a port in the firewall exception list so that my application can be accessed over network even if firewall is disabled. I am using iptables command to add exception.
The problem is, after setting the rule if I change the firewall setting i.e. on/off then it is overwriting... (1 Reply)
Discussion started by: senrooy
1 Replies
7. UNIX for Advanced & Expert Users
Hi,
Someone told me how to check the remote switch port's speed setting on the other end of the cable, from linux. I forgot it.
Anyone knows? I checked dmesg, ethtool (haven't checked this out thoroughly) , no luck.
thanks,
Marc (1 Reply)
Discussion started by: marcpascual
1 Replies
8. IP Networking
Hello everyone.
I am supposed to configure port mirroring on Linux (the LAN traffic needs to be routed to the other interface and passed a copy to network monitoring software):
eth0 - connected to local traffic
eth1 - connected to the Internet
The machine is running CentOS v4.4 (Server... (1 Reply)
Discussion started by: reminiscent
1 Replies
9. IP Networking
Hi all, one of my Sun Box facing the problem.
The network port i had set to Auto-Negotiated and i had edited the /etc/system/ file in the Sun box as below:
set hme:hme_adv_autoneg_cap=1
set hme:hme_adv_100fdx_cap=0
set hme:hme_adv_100hdx_cap=0
But when i checked the /var/adm/messages/, it... (0 Replies)
Discussion started by: AirWalker83
0 Replies
10. UNIX for Dummies Questions & Answers
How can I switch the port which SSH listens on? (1 Reply)
Discussion started by: Spetnik
1 Replies