Login or Register to Ask a Question and Join Our Community


Solaris

Solaris 10 on Enterprise 3500

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris Solaris 10 on Enterprise 3500
# 8  
Old 09-08-2008
here it is :

€Hardware Power ON

5-slot Sun Enterprise E3500, No Keyboard
OpenBoot 3.2.30, 8192 MB memory installed, Serial #10563790.
Copyright 2002 Sun Microsystems, Inc. All rights reserved
Ethernet address 8:0:20:a1:30:ce, Host ID: 80a130ce.



{a} ok
{a} ok
{a} ok bootcdrom -v
bootcdrom ?
{a} ok boot cdrom -v
Boot device: /sbus@3,0/SUNW,fas@3,8800000/sd@6,0:f File and args: -v
|Size: /-\|/-\|0x704c8+/-\|/-\|/-\|/-\0x1b8d2+|/-0x2e1ba Bytes
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/module /platform/sun4u/kernel/sparcv9/unix: text at [0x1000000, 0x10704c7] data at 0x1800000
module misc/sparcv9/krtld: text at [0x10704c8, 0x10889e7] data at 0x1849a90
module /platform/sun4u/kernel/sparcv9/genunix: text at [0x10889e8, 0x11cd177] data at 0x184eec0
module /platform/SUNW,Ultra-Enterprise/kernel/misc/sparcv9/platmod: text at [0x11cd178, 0x11cd7b7] data at 0x18a0050
module /platform/sun4u/kernel/cpu/sparcv9/SUNW,UltraSPARC-II: text at [0x11cd7c0, 0x11d982f] data at 0x18a0880

SunOS Release 5.10 Version Generic 64-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
-\|/-\|/-\|/-\|/-\|/-\|/-\|/Ethernet address = 8:0:20:a1:30:ce
Using default device instance data
-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ €
# 9  
Old 09-08-2008
€Hardware Power ON

5-slot Sun Enterprise E3500, No Keyboard
OpenBoot 3.2.30, 8192 MB memory installed, Serial #10563790.
Copyright 2002 Sun Microsystems, Inc. All rights reserved
Ethernet address 8:0:20:a1:30:ce, Host ID: 80a130ce.



{a} ok
{a} ok
{a} ok bootcdrom -v
bootcdrom ?
{a} ok boot cdrom -v
Boot device: /sbus@3,0/SUNW,fas@3,8800000/sd@6,0:f File and args: -v
|Size: /-\|/-\|0x704c8+/-\|/-\|/-\|/-\0x1b8d2+|/-0x2e1ba Bytes
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/module /platform/sun4u/kernel/sparcv9/unix: text at [0x1000000, 0x10704c7] data at 0x1800000
module misc/sparcv9/krtld: text at [0x10704c8, 0x10889e7] data at 0x1849a90
module /platform/sun4u/kernel/sparcv9/genunix: text at [0x10889e8, 0x11cd177] data at 0x184eec0
module /platform/SUNW,Ultra-Enterprise/kernel/misc/sparcv9/platmod: text at [0x11cd178, 0x11cd7b7] data at 0x18a0050
module /platform/sun4u/kernel/cpu/sparcv9/SUNW,UltraSPARC-II: text at [0x11cd7c0, 0x11d982f] data at 0x18a0880

SunOS Release 5.10 Version Generic 64-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
-\|/-\|/-\|/-\|/-\|/-\|/-\|/Ethernet address = 8:0:20:a1:30:ce
Using default device instance data
-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ €
# 10  
Old 09-08-2008
And here is theoutput with diag-switch?= true, diag-level = max:



Software Power ON

@(#) Ultra Enterprise 3.2 Version 30 created 2002/10/25 14:03

CPU = 0000.0000.0000.000a
Probing keyboard Done

5,0>

5,0>@(#) POST 3.9.30 2002/10/25 14:04

5,1>

5,0>Copyright 2002 Sun Microsystems, Inc. All rights reserved.

5,1>@(#) POST 3.9.30 2002/10/25 14:04

5,0>

SelfTest Initializing (Diag Level 10, ENV 00004001) IMPL 0011 MASK 20

5,1>Copyright 2002 Sun Microsystems, Inc. All rights reserved.

5,0>Board 5 CPU FPROM Test

5,1>

SelfTest Initializing (Diag Level 10, ENV 00000000) IMPL 0011 MASK 20

5,0>Board 5 Basic CPU Test

5,0> Set CPU UPA Config and Init SDB Data

5,0> SRAM Mode = 22, Clock Mode = 4:1, PCON = 6b3, MCAP = 0

5,0>Board 5 MMU Enable Test

5,0> DMMU Init

5,0> IMMU Init

5,0> Mapping Selftest Enabling MMUs

5,0>Board 5 Ecache Test

5,0> Ecache Probe

5,0> Ecache Tags

5,1>Board 5 CPU FPROM Test

5,1>Board 5 Basic CPU Test

5,1> Set CPU UPA Config and Init SDB Data

5,1> SRAM Mode = 22, Clock Mode = 4:1, PCON = 6b3, MCAP = 0

5,1>Board 5 MMU Enable Test

5,1> DMMU Init

5,1> IMMU Init

5,1> Mapping Selftest Enabling MMUs

5,1>Board 5 Ecache Test

5,1> Ecache Probe

5,1> Ecache Tags

5,0> Ecache Quick Verify

5,1> Ecache Quick Verify

5,0> Ecache Init

5,1> Ecache Init

5,0> Ecache RAM

5,1> Ecache RAM

5,0> Ecache Address Line

5,0> Configure Ecache Limit

5,0>Ecache Size = 00400000, Limited to 00400000

5,0>Board 5 FPU Functional Test

5,0> FPU Enable

5,0>Board 5 Board Master Select Test

5,0> Selecting a Board Master

5,0>Board 5 FireHose Devices Test

5,1> Ecache Address Line

5,1> Configure Ecache Limit

5,1>Ecache Size = 00400000, Limited to 00400000

5,1>Board 5 FPU Functional Test

5,1> FPU Enable

5,1>Board 5 Board Master Select Test

5,1> Selecting a Board Master

5,0>Board 5 Address Controller Test

5,0> AC Initialization

5,0> AC DTAG Init

5,0>Board 5 Dual Tags Test

5,0> AC DTAG Init

5,0>Board 5 FireHose Controller Test

5,0> FHC Initialization

5,0>Board 5 JTAG Test

5,0> Verify System Board Scan Ring

5,0>Board 5 Centerplane Test

5,0> Centerplane Join

5,0>Setting JTAG Master

5,0>Clear JTAG Master

5,0>Board 5 Setup Cache Size Test

5,0> Setting Up Cache Size

5,0>Board 5 System Master Select Test

5,0> Setting System Master

5,0>POST Master Selected (JTAG,CENTRAL)

5,0>Board 16 Clock Board Test

5,0> Clock Board Initialization

5,0> Clock Board Temperature Check

5,0>Board 16 Clock Board Serial Ports Test

5,0>Board 16 NVRAM Devices Test

5,0> M48T59 (TOD) Init

5,0>Board 5 System Board Probe Test

5,0> Probing all CPU/Memory BDA

5,0> Probing System Boards

5,0> Probing CPU Module JTAG Rings

5,0>Setting System Clock Frequency

5,0> CPU Module mid 10 Checked in OK (speed code = 7)

5,0> CPU mid 11 Version=00170011.20000507

5,0> CPU Module mid 11 Checked in OK (speed code = 7)

5,0> CPU mid 18 Version=00170011.20000507

5,0> CPU Module mid 18 Checked in OK (speed code = 7)

5,0> CPU mid 19 Version=00170011.20000507

5,0> CPU Module mid 19 Checked in OK (speed code = 7)

5,0>System Frequency (MHz),fcpu=336, fmod=168, fsys=84, fgen=336

5,0>TESTING BOARD 1

5,0>Board 1 JTAG Test

5,0> Verify System Board Scan Ring

5,0>Board 1 Centerplane Test

5,0> Centerplane Check

5,0>Board 1 Address Controller Test

5,0> AC Initialization

5,0>Setting Freq to 25MHZ

5,0> AC DTAG Init

5,0>Board 1 FireHose Controller Test

5,0> FHC Initialization

5,0>Board 1 NVRAM Devices Test

5,0> M48T59 (TOD) Init

5,0>TESTING BOARD 3

5,0>Board 3 JTAG Test

5,0> Verify System Board Scan Ring

5,0>Board 3 Centerplane Test

5,0> Centerplane Check

5,0>Board 3 Address Controller Test

5,0> AC Initialization

5,0>Setting Freq to 33MHZ

5,0> AC DTAG Init

5,0>Board 3 FireHose Controller Test

5,0> FHC Initialization

5,0>Board 3 NVRAM Devices Test

5,0> M48T59 (TOD) Init

5,0>TESTING BOARD 7

5,0>Board 7 JTAG Test

5,0> Verify System Board Scan Ring

5,0>Board 7 Centerplane Test

5,0> Centerplane Check

5,0>Board 7 Address Controller Test

5,0> AC Initialization

5,0>Setting Freq to 33MHZ

5,0> AC DTAG Init

5,0>Board 7 FireHose Controller Test

5,0> FHC Initialization

5,0>Board 7 NVRAM Devices Test

5,0> M48T59 (TOD) Init

5,0>Re-mapping to Local Device Space

5,0>Begin Central Space Serial Port access

5,0>Enable AC Control Parity

5,0>Hotplug Trigger Test

5,0>Init Counters for Hotplug

5,0>Board 5 Cross Calls Test

5,0>Board 5 Environmental Probe Test

5,0> Environmental Probe

5,0>Checking Power Supply Configuration

5,0>Power is adequate, load 5 ps 3

5,0>Use existing memory configuraton

5,0>TESTING IO BOARD 1

5,0>Board 1 I/O FPROM Test

5,0>@(#) iPOST 3.4.30 2002/10/25 14:03

5,0> TESTING IO BOARD 1 ASICs

5,0> TESTING SysIO Port 0

5,0>Board 1 SysIO Registers Test

5,0> SysIO Register Initialization

5,0> SysIO RAM Initialization

5,0>Board 1 SysIO Functional Test

5,0> Clear Interrupt Map and State Registers

5,0>Board 1 OnBoard IO Chipset (SOC) Test

5,0> TESTING SysIO Port 1

5,0>Board 1 SysIO Registers Test

5,0> SysIO Register Initialization

5,0> SysIO RAM Initialization

5,0>Board 1 SysIO Functional Test

5,0> Clear Interrupt Map and State Registers

5,0>Board 1 OnBoard IO Chipset (FEPS) Test

5,0>IO BOARD 1 TESTED

5,0>TESTING IO BOARD 3

5,0>Board 3 I/O FPROM Test

5,0>@(#) iPOST 3.0.30 2002/10/25 14:03

5,0> TESTING IO BOARD 3 ASICs

5,0> TESTING Psycho Port 0

5,0>Board 3 Psycho Basic Test

5,0>Board 3 Psycho Functional Test

5,0> Init Psycho

5,0>Board 3 Psycho Error Test

5,0> Init Psycho

5,0>Board 3 OnBoard IO Chipset (Cheerio) Test

5,0> Init Cheerio

5,0> TESTING PSYCHO Port 1

5,0>Board 3 Psycho Basic Test

5,0>Board 3 Psycho Functional Test

5,0> Init Psycho

5,0>Board 3 Psycho Error Test

5,0> Init Psycho

5,0>Board 3 OnBoard IO Chipset (ISP1040) Test

5,0> ISP PCI Configuration Space Validation

5,0>IO BOARD 3 TESTED

5,0>TESTING IO BOARD 7

5,0>Board 7 I/O FPROM Test

5,0>@(#) iPOST 3.0.30 2002/10/25 14:03

5,0> TESTING IO BOARD 7 ASICs

5,0> TESTING Psycho Port 0

5,0>Board 7 Psycho Basic Test

5,0>Board 7 Psycho Functional Test

5,0> Init Psycho

5,0>Board 7 Psycho Error Test

5,0> Init Psycho

5,0>Board 7 OnBoard IO Chipset (Cheerio) Test

5,0> Init Cheerio

5,0> TESTING PSYCHO Port 1

5,0>Board 7 Psycho Basic Test

5,0>Board 7 Psycho Functional Test

5,0> Init Psycho

5,0>Board 7 Psycho Error Test

5,0> Init Psycho

5,0>Board 7 OnBoard IO Chipset (ISP1040) Test

5,0> ISP PCI Configuration Space Validation

5,0>IO BOARD 7 TESTED

5,0>Probing for Disk System boards

5,0>Board 5 System Interrupts Test

5,0>

5,0> System Board Status

5,0>-----------------------------------------------------------------

5,0> Slot Board Status Board Type Failures

5,0>-----------------------------------------------------------------

5,0> 0 | Not installed | |

5,0> 1 | Normal | IO Type 1 |

5,0> 2 | Not installed | |

5,0> 3 | Normal |+IO Type 3 |

5,0> 4 | Not installed | |

5,0> 5 | Normal |+CPU/Memory |

5,0> 6 | Not installed | |

5,0> 7 | Normal |+IO Type 3 |

5,0> 8 | Not installed | |

5,0> 9 | Normal |+CPU/Memory |

5,0> 16 | Normal | Clock Board |

5,0>-----------------------------------------------------------------

5,0>

5,0> CPU Module Status

5,0>-----------------------------------------------------------------

5,0> MID OK Cache Speed Version

5,0>-----------------------------------------------------------------

5,0> 10 | y | 4096 | 336 | 00170011.20000507

5,0> 11 | y | 4096 | 336 | 00170011.20000507

5,0> 18 | y | 4096 | 336 | 00170011.20000507

5,0> 19 | y | 4096 | 336 | 00170011.20000507

5,0>-----------------------------------------------------------------

5,0>System Frequency (MHz),fcpu=336, fmod=168, fsys=84, fgen=336

5,0> Populated Memory Bank Status

5,0> bd # Size Address Way Status

5,0> 5 2048 0 4 Normal

5,0> 5 2048 2 4 Normal

5,0> 9 2048 1 4 Normal

5,0> 9 2048 3 4 Normal

5,0>

5,0>

POST COMPLETE

5,0>Entering OBP


Switching to high addresses

Setting up TLBs Done
MMU ON
PC = 0000.01ff.f000.1cb8
PC = 0000.0000.0000.1d24
Decompressing into Memory Done
Size = 0000.0000.0006.d8c0
ttya initialized
Using POST's System Configuration
Setting up memory
Starting CPU ID 11
Starting CPU ID 18
Starting CPU ID 19
fhc ac simm-status environment sram flashprom SUNW,UltraSPARC-II SUNW,UltraSPARC-II
fhc ac simm-status environment sram flashprom SUNW,UltraSPARC-II SUNW,UltraSPARC-II
Probing UPA Slot at 2,0 sbus fhc ac environment flashprom eeprom sbus-speed counter-timer
Probing UPA Slot at 3,0 sbus counter-timer
Probing UPA Slot at 6,0 pci pci fhc ac environment flashprom eeprom sbus-speed counter-timer
Probing UPA Slot at 7,0 pci pci counter-timer
Probing UPA Slot at e,0 pci pci fhc ac environment flashprom eeprom sbus-speed counter-timer
Probing UPA Slot at f,0 pci pci counter-timer
Probing /sbus@2,0 at d,0 SUNW,soc
Probing /sbus@2,0 at 1,0 cgsix
Probing /sbus@2,0 at 2,0 Nothing there
Probing /sbus@3,0 at 3,0 SUNW,hme SUNW,fas sd st
Probing /sbus@3,0 at 0,0 SUNW,socal sf ssd sf ssd
Probing /pci@6,4000 at 1 pci108e,1000 SUNW,hme
Probing /pci@7,4000 at 3 SUNW,isptwo sd st
Probing /pci@6,2000 at 2 Nothing there
Probing /pci@7,2000 at 2 Nothing there
Probing /pci@e,4000 at 1 pci108e,1000 SUNW,hme
Probing /pci@f,4000 at 3 SUNW,isptwo sd st
Probing /pci@e,2000 at 2 Nothing there
Probing /pci@f,2000 at 2 Nothing there
Using POST's System Configuration
Setting up memory
Starting CPU ID 11
Starting CPU ID 18
Starting CPU ID 19
fhc ac simm-status environment sram flashprom SUNW,UltraSPARC-II SUNW,UltraSPARC-II
fhc ac simm-status environment sram flashprom SUNW,UltraSPARC-II SUNW,UltraSPARC-II
Probing UPA Slot at 2,0 sbus fhc ac environment flashprom eeprom sbus-speed counter-timer
Probing UPA Slot at 3,0 sbus counter-timer
Probing UPA Slot at 6,0 pci pci fhc ac environment flashprom eeprom sbus-speed counter-timer
Probing UPA Slot at 7,0 pci pci counter-timer
Probing UPA Slot at e,0 pci pci fhc ac environment flashprom eeprom sbus-speed counter-timer
Probing UPA Slot at f,0 pci pci counter-timer
Probing /sbus@2,0 at d,0 SUNW,soc
Probing /sbus@2,0 at 1,0 cgsix
Probing /sbus@2,0 at 2,0 Nothing there
Probing /sbus@3,0 at 3,0 SUNW,hme SUNW,fas sd st
Probing /sbus@3,0 at 0,0 SUNW,socal sf ssd sf ssd
Probing /pci@6,4000 at 1 pci108e,1000 SUNW,hme
Probing /pci@7,4000 at 3 SUNW,isptwo sd st
Probing /pci@6,2000 at 2 Nothing there
Probing /pci@7,2000 at 2 Nothing there
Probing /pci@e,4000 at 1 pci108e,1000 SUNW,hme
Probing /pci@f,4000 at 3 SUNW,isptwo sd st
Probing /pci@e,2000 at 2 Nothing there
Probing /pci@f,2000 at 2 Nothing there

5-slot Sun Enterprise E3500, No Keyboard
OpenBoot 3.2.30, 8192 MB memory installed, Serial #10563790.
Copyright 2002 Sun Microsystems, Inc. All rights reserved
Ethernet address 8:0:20:a1:30:ce, Host ID: 80a130ce.



Rebooting with command: boot cdrom -v
Boot device: /sbus@3,0/SUNW,fas@3,8800000/sd@6,0:f File and args: -v
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
Redirected to slice: 1
Loading: /platform/SUNW,Ultra-Enterprise/ufsboot
Loading: /platform/sun4u/ufsboot
|Size: /-\|/-\|0x704c8+/-\|/-\|/-\|/-\0x1b8d2+|/-0x2e1ba Bytes
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/module /platform/sun4u/kernel/sparcv9/unix: text at [0x1000000, 0x10704c7] data at 0x1800000
module misc/sparcv9/krtld: text at [0x10704c8, 0x10889e7] data at 0x1849a90
module /platform/sun4u/kernel/sparcv9/genunix: text at [0x10889e8, 0x11cd177] data at 0x184eec0
module /platform/SUNW,Ultra-Enterprise/kernel/misc/sparcv9/platmod: text at [0x11cd178, 0x11cd7b7] data at 0x18a0050
module /platform/sun4u/kernel/cpu/sparcv9/SUNW,Ultra
# 11  
Old 09-08-2008
Obvious thelast part didnt get copied, so here it is :

module /platform/sun4u/kernel/cpu/sparcv9/SUNW,UltraSPARC-II: text at [0x11cd7c0
, 0x11d982f] data at 0x18a0880
SunOS Release 5.10 Version Generic 64-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Ethernet address = 8:0:20:a1:30:ce
Using default device instance data
/

and here the machine stops again.
# 12  
Old 09-08-2008
Then I turned the machine off for about 20 minutes, turned it back on again, connected screen and keyboard and told it to boot cdrom, and now I got this message afterthe license-message:
WARNING: status `fail`for`/fhc@2/f8800000/eeprom@0,300000` on board 1.
But it continues with the install.... Tell me what this meant if you know, is that a failing memorystrip, or is it something I can fix ? I will go on installing Solaris 10 now( if itworks), thanks for all your patience with me, so far.Smilie
# 13  
Old 09-09-2008
I don't know if you had set-defaults at the ok prompt..
Anyway, I guess, it could be the NVRAM chip mulfunctioned.
But if you do have a system board onthe other slots, move any of it to this particular one and try (both methods, using its own NVRAM chip and with the one we're talking abt). From here we can isolate if the problem is with the board , firmware or not
Last edited by incredible; 09-09-2008 at 07:40 AM..
# 14  
Old 09-09-2008
Yes I had set-defaults, this chip that is malfunctioning , do you know how to fix it or do you know if it is serious? You said something about Veritas?Smilie
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Need help -- netra 5 Solaris enterprise 2

I need help to resurrect very old netra machines. two of them are netra enterprise 2 and they do not boot with the message Cant open boot device The IDPROM contents are invalid Boot device: net File and args the host is not connected to any LAN I brought up another Netra 5 connected to... (3 Replies)
Discussion started by: rk2153
3 Replies

2. Solaris

Booting problem on Sun 3500

Booting problem on Sun 3500 Hi, I have a Sun 3500 server on which i installed solaris 5.2 installed . i dont know why from the time i have built this server whenever i try to boot it, the server doesnot come back smooth.i got a message Sync file system than restart some times showing ok... (2 Replies)
Discussion started by: najeer
2 Replies

3. Solaris

Sun Solaris Enterprise E250 x64 Help

Hi everybody, my name is Giulia and for me is the fist time in this forum, i hope write in the correct section for my problem. I have a sun solaris server e250 enterprise with sun 5 versionof O.S. Now i wont format all and install new version of solaris, but i don't know the actual corrent... (7 Replies)
Discussion started by: giulia79
7 Replies

4. Solaris

Solaris 10 on Enterprise 4500 install problem

Good day, I am dummie on solaris and trying learning about Solaris, so no much experience, this is my problem, I got enterprise 4500 SUN Sparc hardware, has 2 internal SCSI HD, when I try to install Solaris 10 says that "no disk found" at middle of installation, I already change the HD and the... (3 Replies)
Discussion started by: edgargarcia_y2k
3 Replies

5. IP Networking

More then 3500 sockets in FIN_WAIT1

Hello, My config: SLES 10 sp1 Apache / drupal / mysql I have a saturation of TCP ports on this hosts. Hosting about 60 websites. The event tonight was ~200 hits minutes. With "netstat-n" I see ~5500 connections. Including approximately 3800 in FIN_WAIT1. As a first step I would... (3 Replies)
Discussion started by: lilech
3 Replies

6. Solaris

Install solaris 2.6 on Enterprise 420R

I am needing to install solaris 2.6 on a Enterprise 420R with 4X450mHz. Documentation says you need Operating Enviroment Installation CD February 2000(704-7076-10). Does anyone know where I can get this? (4 Replies)
Discussion started by: jenyart
4 Replies

7. Solaris

Solaris 10 on Enterprise 250

Hi experts, I have bought a used SUN Enterprise 250 server that currently runs solaris 8. Ive downloaded solaris 10 (sparc edition) from sun.com, and have burned the iso files to cd roms. So far so good. I can log into the system via the serial interface (port A). I want to sweep the discs,... (21 Replies)
Discussion started by: congo
21 Replies

8. Solaris

Booting problem on Sun 3500

Hi, I have a Sun 3500 server on which i installed solaris 8 and have also installed veritas 4.0 on it. i dont know why from the time i have built this server whenever i try to boot it, the server doesnot come back smooth.... i have got to connect a laptop to the serial port of the server and... (3 Replies)
Discussion started by: ishila
3 Replies

9. UNIX for Advanced & Expert Users

Enterprise 450 Solaris 9 Problems

I am just getting started loading an Enterprise 450 Dell with Solaris 9 however I cannot get out of a loop that is not letting me get started. My basic question is what are the key strokes to get you out of a boot sequence so that you can at least clear the hard drive or start an install ... (9 Replies)
Discussion started by: Joe7778
9 Replies

10. UNIX for Advanced & Expert Users

Solaris 8 crash on Enterprise 3500

Hi Should anyone be able to help, one of my colleagues was doing a truss this morning and I am not sure if it has offset the system crash, but we have had these type of errors coming up???? # ls ls: Cannot read /usr/lib/ld.so.1 Killed # ps -ef ps: Cannot read /usr/lib/ld.so.1 Killed #... (1 Reply)
Discussion started by: NAV4869
1 Replies
Login or Register to Ask a Question