Network

8 More Discussions You Might Find Interesting

1. IP Networking

I would like to monitor network traffic for a computer on my network

My son does homework on a school laptop. I was thinking about setting up a gateway on my home network, so that I can monitor web traffic and know if he is doing his homework without standing over his shoulder. Ideally I would like to use the Raspberry Pi Model b that I already have. However, I...

2. Red Hat

Network becomes slow and return fast only after restart network

Hi, I have 2 machines in production environment: 1. redhat machine for application 2. DB machine (oracle) The application doing a lot of small read&writes from and to the DB machine. The problem is that after some few hours the network from the application to the DB becomes very slow and...

3. Solaris

No network cable But Network interface is UP and Running

I've one Netra 240 After changing main board and system configuration card reader, Network is not accessible any more, Network interfaces are always UP and Running even when there is no cable connected to Network interfaces. I tried to restart and plumb/unplumb with no luck. ifconfig -a...

4. UNIX and Linux Applications

Access to network interface (Mac-network)

Hi, I'm a italian student. For my thesis I develop a gateway with protocol 6lowpan. For that I must access to network interface to develope my personal stack based on standard 802.15.4. Can you help me? I need an explanation for that.

5. Solaris

configure zones to have different network interface and network

i need to configure a zone to use different interface (bge2) than global and have connected to completely different network switch & to use its own defaultrouter and hosts file .. is it possible ..if so ..how ? Thanks

6. UNIX for Advanced & Expert Users

Network Shell Script & Blade Logic & Network Security

I am going to take up a position in Data & Network Security. I would need to write network shell scripts doing the following task: Going to around 2000 servers and findout which groups has access to each servers and which ids are there in each group that has access. I need to implement...

7. IP Networking

ssh server is attachable from local network not from another network

hello i have a ubuntu ssh server that i can acess from any of my comnputers but only if they are on the same wireless network as the server. i tested trhis my tehtehring my samsung blackjack to my windows partition and installing openssh to windows it works when windows is on the wireless but no...

8. Programming

Help in developing a Network Appliation to monitor pc in a network

I am developing a Network Appliation to monitor computers in a network. Specs are App monitors the current web page viewed in each system App also can shutdown the computer in the network App can show all process run by each computer in the network I am now confused how to start my...

LEARN ABOUT OPENSOLARIS

oplhpd

oplhpd(1M)						  System Administration Commands						oplhpd(1M)

NAME

       oplhpd - Hot plug daemon for SPARC Enterprise Server line

SYNOPSIS

       /usr/platform/SUNW,SPARC-Enterprise/lib/sparcv9/lib/oplhpd

DESCRIPTION

       The  hot  plug daemon for SPARC Enterprise Servers is a daemon process that runs on the SUNW,SPARC-Enterprise family of servers. The daemon
       is started by the service management facility (see smf(5)) and communicates with the service processor when hot plug PCI  cassettes  change
       their dynamic reconfiguration state.

       The service FMRI for oplhpd is:

	 svc:/platform/sun4u/oplhpd:default

       A domain supports only one running oplhpd process at a time.

ERRORS

       OPLHPD uses syslog(3C) to report status and error messages. All of the messages are logged with the LOG_DAEMON facility.

       Error  messages	are  logged with the LOG_ERR and LOG_NOTICE priorities, and informational messages are logged with the LOG_DEBUG priority.
       The default entries in the /etc/syslog.conf file log all of the OPLHPD error messages to the /var/adm/messages log.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWdcsu, SUNWdcsr	   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       svcs(1), inetadm(1M), svcadm(1M), syslog(3C), syslog.conf(4), attributes(5), smf(5)

SunOS 5.11							    23 May 2006 							oplhpd(1M)

Solaris