The raidctl utility isn't going to do anything to help configure LUNs presented from any fiber channel array, assuming that's how the P2000 is connected in this case.
Post the output from this:
If the array is properly connected to the HBA ports, that should show SOMETHING even if it doesn't show the actual LUNs. You should probably get a copy of the P2000 documentation and make sure you have the array connected properly.
If this HBA can see the LUNs, the OS will be able to access them.
The raidctl utility isn't going to do anything to help configure LUNs presented from any fiber channel array, assuming that's how the P2000 is connected in this case.
Post the output from this:
If the array is properly connected to the HBA ports, that should show SOMETHING even if it doesn't show the actual LUNs. You should probably get a copy of the P2000 documentation and make sure you have the array connected properly.
If this HBA can see the LUNs, the OS will be able to access them.
Hey everyone. First, let me start by saying I'm primarily focused on linux boxes, and just happened to get pulled into building two T5220's. I'm not super educated on sun boxes.
Both T5220's have 8 146GB 15k SAS drives. Inside the service processor, I can run SHOW /SYS/HDD{0-7} and they all come... (2 Replies)
We have hardware RAID configured on Sun-Blade-T6320 and one of the disk got failed. Hence we replaced the failed disk. But the hot swapped disk not recognized by RAID. Kindly help on fixing this issue.
We have 2 LDOM configured on this server and this server running on single disk.
#... (8 Replies)
Hello folks;
I'm trying to install Solaris 10 x86 on SUN X4150 box with 6 disks in it, the question is how can i create a Virtual disk like RAID 0 before i install Solaris.
When i boot up i don't see any option to go and create my raid before the installation begin.
Thanks in advance for any... (2 Replies)
I've just installed Sol 10 Update 9 on a Sun 4140 server and have a RAID 1 configuration (2 136 Gb drives) for the OS and have created a RAID 5 array (6 136 GB) drives. When i log into the system I am unable to see the RAID 5 disks at all. I've tried using the devfsadm command but no luck and... (9 Replies)
hi all, will command metastats tell whether there is hardware layered raid ?
i intend to do patching and plug out one of the disks in case the one inside encountered issues. (1 Reply)
Hi,
I tried to setup a Riad 0+1 but I found no step by step manual to follow so I tried on my own ;)
I'd already configured a mirror for the OS on my Solaris machines so I had an idea where to start. I have 9 drives in the server.
1. I configured the first two as a mirror for the OS.
2. I... (1 Reply)
Hi there,
I was wondering if it is possible to include a RAID configuration in my Solaris 10 Jumpstart files, so that I don't have to manually set up RAID on all my machines.
Thanks
P.S. I started messing around with Solaris only a week back, so if I sound like a complete idiot, you know... (1 Reply)
if i want to create a raid 5 device on 3 disks I have, can I make multiple metadevices? all the example i see on the internet make use of the slice 2 placing the entire disk into the raid5 device.
what if i make 3 identical slices on each disk, and make 3 raid 5 metadevices? will that work? (1 Reply)
All,
Is there a way to RAID the disks in Solaris 9? Solaris 8 provided DiskSuite for mirroring disk drives. Is there a GUI for DiskSuite in Solaris 9?
Thanks,
Mike (2 Replies)