Partitioning hard disk. Want 8 slices...have 9

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Which is a recommended method of partitioning Disk?

I m not sure if this is a right question to ask . During the installation of the OS, installation sw does partitioning for you. I m not quit sure if they have used parted or fdisk to partition the disk. (If they are using fdisk then you can't make partition > 2Tb )correct me if i m wrong.Also...

2. Red Hat

Partitioning newly added disk to Redhat

Hi Everyone, I have added new Virtual disk to OS. The main point is I need to bring this whole Disk into LVM control, is it necessary to partition the disk using fdisk command and assign partition type as '8e', or can I directly add that disk into LVM, by running pvcreate command with out...

3. Linux

C++ Code to Access Linux Hard Disk Sectors (with a LoopBack Virtual Hard Disk)

Hi all, I'm kind of new to programming in Linux & c/c++. I'm currently writing a FileManager using Ubuntu Linux(10.10) for Learning Purposes. I've got started on this project by creating a loopback device to be used as my virtual hard disk. After creating the loop back hard disk and mounting it...

4. Red Hat

Disk partitioning commands for RHEL5

I'm new to Linux 5, going through initial phases of installation and setting up devices, etc,, and much to my surprise discovered also an existence of a 2nd hard drive to try to initialize and partition perhaps using any built-in command i.e. "fdisk" or similar, but I couldn't get the command to...

5. Solaris

mirroring root disk using svm - but no free slices for metadb's

Hi all, we have an existing system that was configured using just one of the (two) internal disks. I want to mirror the disk using SVM, but have realised there is no free slice for creating the metadb's. Is there a workaround I can use for this? In the past we have always kept slice 7 free -...

6. Solaris

disk partitioning

Total disk size is 38912 cylinders Cylinder size is 32130 (512 byte) blocks Cylinders Partition Status Type Start End Length % ========= ====== ============ ===== === ====== === ...

7. UNIX for Dummies Questions & Answers

Resize root disk slices

I have a Sun box running Solaris 9. My root disk was slices too small when it was installed and I am now at 99% capacity for my root partition. Is it possible, and if so how?, to increase the size of slice 0 and decrease the size of slice 7?? Thanks! Current partition table...

8. Filesystems, Disks and Memory

The best partitioning schem for a 250GB Sata hard drive & a 75GB SCSI hard drive

Hi I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /...

9. UNIX for Dummies Questions & Answers

Hard Disk partitioning to use UNIX

Hello, To run UNIX, can the hard disk be partitioned so I could use that part for UNIX and the other for my existing Windows '98? At the moment there are hard drives C: & D:. Also, where can I obtain the UNIX software?.....Your response is appreciated.

10. UNIX for Dummies Questions & Answers

new disk slices

How do I create new disk slices taking space from an existing slice? Right now I have slice 6 (/usr) with 16G. I'd like to create slices 5 (/opt) and 7 (/export/home) and steal space from slice 6. Thanks

LEARN ABOUT XFREE86

gludisk

GLUDISK(3G)															       GLUDISK(3G)

NAME

       gluDisk - draw a disk

C SPECIFICATION

       void gluDisk( GLUquadric* quad,
		     GLdouble inner,
		     GLdouble outer,
		     GLint slices,
		     GLint loops )

PARAMETERS

       quad    Specifies the quadrics object (created with gluNewQuadric).

       inner   Specifies the inner radius of the disk (may be 0).

       outer   Specifies the outer radius of the disk.

       slices  Specifies the number of subdivisions around the z axis.

       loops   Specifies the number of concentric rings about the origin into which the disk is subdivided.

DESCRIPTION

       gluDisk	renders a disk on the z = 0 plane. The disk has a radius of outer, and contains a concentric circular hole with a radius of inner.
       If inner is 0, then no hole is generated. The disk is subdivided around the z axis into slices (like pizza slices), and also  about  the  z
       axis into rings (as specified by slices and loops, respectively).

       With  respect  to  orientation,	the +z side of the disk is considered to be "outside" (see gluQuadricOrientation).  This means that if the
       orientation is set to GLU_OUTSIDE, then any normals generated point along the +z axis. Otherwise, they point along the -z axis.

       If texturing has been turned on (with gluQuadricTexture), texture coordinates are generated linearly such that where r=outer, the value	at
       (r, 0, 0) is (1, 0.5), at (0, r, 0) it is (0.5, 1), at (-r, 0, 0) it is (0, 0.5), and at (0, -r, 0) it is (0.5, 0).

SEE ALSO

       gluCylinder(3G), gluNewQuadric(3G), gluPartialDisk(3G), gluQuadricOrientation(3G), gluQuadricTexture(3G), gluSphere(3G)

																       GLUDISK(3G)

Solaris