And even in non mission critical ones. Abruptly killing a process without even trying to understand what this process is and why it uses some directory is ... overkill.
mount -f nfs 1234:/export/ert /der/fr/ert
mount : /der/fr/ert: device busy
normally I will then do an
fuser filesystem
and kill the pids, which I did.
now if I do an fuser /der/fr/ert
I get the mount point and no pid
> fuser /der/fr/ert
/der/fr/ert:
but it... (1 Reply)
Hi,
Unable to make tape backup, please help.
/opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00
* Creating local directories for configuration files and archive.
======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery.
(Mon... (4 Replies)
The green cdrom light is blinking on our Sun Solaris server. I tried the eject command to eject cdrom:
eject cdrom
cdrom: No such file or directory
bash-2.05# eject
No default media available
bash-2.05# eject cdrom0
cdrom0: No such file or directory
The message log file shows:
Oct 19... (6 Replies)
Hey everyone, I currently have a sparcstation 5, and am trying to run some scripts on it without booting off the hard drive.
Currently I am using a Solaris 8 install cd to boot into single user mode. However, the scripts I have are on a different CD.
What I would like to do is to use the... (6 Replies)
Hi,
I'm trying to do a sharity mount to mount a terastation network drive.
I'm getting a Device or resource busy message after my mount command. Please see output below...
# /usr/local/sharity3/bin/sharity mount smb://labbackup01/bakup_data /mnt/labbackup01
Device or resource busy.... (2 Replies)
Hi,
When I insert a cd to CDROM drive in SF V210 Solaris 10 it took seconds then eject it auto!
How can I solve this issue?
Thanks
Regards :) (8 Replies)
Anyone have any idea why I cannot umount a directory even though fuser shows no process attached to it?
fuser -cu /data/oracle/GMPSHRDM/export
/data/oracle/GMPSHRDM/export:
umount /data/oracle/GMPSHRDM/export
umount: cannot unmount /data/oracle/GMPSHRDM/export : Device busy
umount:... (2 Replies)
Now i have a prolem!
I double click on my zip file from cdrom.
System can not read my zip file and i can not eject my cdrom.
How can i manage process and can i end a process
or how can i eject my cdrom?
please have me! thanks (4 Replies)
Hi I have placed a CD into the rom and now I can not eject it.
when i type in
eject cdrom i get the follwing error
root@ssdb0009 # eject cdrom
/vol/dev/rdsk/c0t6d0/dp_a0500_solaris_7_and_8_cd: Device busy
Therefore i try and eject it with the -f option (eject -f cdrom) I still get the... (4 Replies)
I'm trying to unmount a file system, but umount says the device is busy. A fuser -c /myfs tells me that nothing on this fs is in use. Any idea?
Oh, and btw, why isn't my signature beeing displayed? Show user's signature is enabled and I have entered one :/ (10 Replies)
eject(1) User Commands eject(1)NAME
eject - eject media such as CD-ROM and floppy from drive
SYNOPSIS
eject [-dfnpq] [device | nickname]
DESCRIPTION
The eject utility is used for those removable media devices that do not have a manual eject button, or for those that do, but are managed
by Volume Management (see vold(1M)). The device may be specified by its name or by a nickname; if Volume Management is running and no
device is specified, the default device is used.
Only devices that support eject under program control respond to this command. eject responds differently, depending on whether or not Vol-
ume Management is running.
With Volume Management
When eject is used on media that can only be ejected manually, it will do everything except remove the media, including unmounting the file
system if it is mounted. In this case, eject displays a message that the media can now be manually ejected. If a window system is running,
the message is displayed as a pop-up window, unless the -p option is supplied. If no window system is running or the -p option is supplied,
a message is displayed both to stderr and to the system console that the media can now be physically removed.
Volume Management has the concept of a default device, which eject uses if no pathname or nickname is specified. Use the -d option to check
what default device will be used.
Without Volume Management
When Volume Management is not running and a pathname is specified, eject sends the eject command to that pathname. If a nickname is sup-
plied instead of a pathname, eject will recognize the following list:
+-----------------------------+-----------------------------+
| Nickname | Path |
|fd |/dev/rdiskette |
|fd0 |/dev/rdiskette |
|fd1 |/dev/rdiskette1 |
|diskette |/dev/rdiskette |
|diskette0 |/dev/rdiskette0 |
|diskette1 |/dev/rdiskette1 |
|rdiskette |/dev/rdiskette |
|rdiskette0 |/dev/rdiskette0 |
|rdiskette1 |/dev/rdiskette1 |
|floppy |/dev/rdiskette |
|floppy0 |/dev/rdiskette0 |
|floppy1 |/dev/rdiskette1 |
+-----------------------------+-----------------------------+
The list above can be reproduced with the -n option.
Do not physically eject media from a device which contains mounted file systems. eject automatically searches for any mounted file systems
which reside on the device and attempts to umount them prior to ejecting the media (see mount(1M)). If the unmount operation fails, eject
prints a warning message and exits. The -f option may be used to specify an eject even if the device contains mounted partitions; this
option works only if Volume Management is not running.
eject can also display its default device and a list of nicknames.
If you have inserted a floppy diskette, you must use volcheck(1) before ejecting the media to inform Volume Management of the floppy's
presence.
OPTIONS
The following options are supported:
-d Displays the name of the default device to be ejected.
-f Forces the device to eject even if it is busy, if Volume Management is not running.
-n Displays the nickname to device name translation table.
-p Does not try to call the eject_popup program.
-q Queries to see if the media is present.
OPERANDS
The following operands are supported:
device Specifies which device to eject, by the name it appears in the directory /dev.
nickname Specifies which device to eject, by its nickname as known to this command.
EXAMPLES
Example 1: Ejecting a CD while Volume Management is running
To eject a CD from its drive, while Volume Management is running (assuming only one CD-ROM drive):
example> eject cdrom0
Example 2: Ejecting a CD-ROM without running Volume Management
To eject a CD-ROM drive with pathname /dev/dsk/c0t3d0s2, without Volume Management running:
example> eject /dev/dsk/c0t3d0s2
Example 3: Ejecting a floppy disk
To eject a floppy disk (whether or not Volume Management is running):
example> eject floppy0
EXIT STATUS
The following exit codes are returned:
0 The operation was successful or, with the -q option, the media is in the drive.
1 The operation was unsuccessful or, with the -q option, the media is not in the drive.
2 Invalid options were specified.
3 An ioctl() request failed.
4 Manually ejectable media is now okay to remove.
FILES
/dev/diskette0 default diskette file
/dev/sr0 default CD-ROM file (deprecated)
/dev/dsk/c0t6d0s2 default CD-ROM file
/usr/lib/vold/eject_popup popup used for manually ejected media
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO volcancel(1), volcheck(1), volmissing(1), mount(1M), rmmount(1M), vold(1M), ioctl(2), rmmount.conf(4), vold.conf(4), attributes(5),
volfs(7FS)DIAGNOSTICS
A short help message is printed if an unknown option is specified. A diagnostic is printed if the device name cannot be opened or does not
support eject.
Device Busy An attempt was made to eject a device that has a mounted file system. A warning message is printed when doing a forced
eject of a mounted device.
BUGS
There should be a way to change the default on a per-user basis.
If Volume Management is not running, it is possible to eject a volume that is currently mounted (see mount(1M)). For example, if you have a
CD-ROM drive at /dev/dsk/c0t3d0s2 mounted on /mnt, the following command (without Volume Management running) will work:
example> eject /dev/dsk/c0t3d0s0
since both slices s0 and s2 reference the whole CD-ROM drive.
SunOS 5.10 20 Sep 1996 eject(1)