9 More Discussions You Might Find Interesting
1. UNIX for Beginners Questions & Answers
Hello Everyone
I am a software developer and private OS X user. I was enthusiastic with what I learned about Linux (on my OS X) during the operating system module at school and I am using some of it.
But I may not want to go the Apple way till the end. And OS X is a little too big to run on a... (5 Replies)
Discussion started by: JacobPhelps
5 Replies
2. Solaris
Hi all...I have an old Sun Ultra 2 running SunOS 5.7 (I know old). These machines have 2 hard drives and one of my drives fried. I bought some replacement drives and wanted to a simple "dd" command from my one good drive to copy all to the new replacement drive. The new drives however give me a... (11 Replies)
Discussion started by: psantinello
11 Replies
3. Solaris
I have a removable usb flash drive which is visible below as no. 2
# rmformat
Looking for devices...
1. Volmgt Node: /vol/dev/aliases/cdrom0
Logical Node: /dev/rdsk/c0t0d0s2
Physical Node: /pci@0,0/pci-ide@1f,1/ide@0/sd@0,0
Connected Device: HL-DT-ST DVD+-RW... (4 Replies)
Discussion started by: seyiisq
4 Replies
4. Ubuntu
Hello,
I have a 2 GB RealTek flash drive that has worked well in the past. It's about 1 year old but lately when I plug it into my Ubuntu Intrepid system it only shows 50 MB available even though there are no files on it:
$ df -k /media/disk-1
Filesystem 1K-blocks Used... (1 Reply)
Discussion started by: mgb
1 Replies
5. Red Hat
Hi all,
I need some help with a RHEL 4 on a Sun Fire v65x machine.
Some of the disks is damaged or has a hardware issue. This disk is connected to a hardware raid.
The problem is that I don't know what is the brand, model and capacity of the disk.
I've read the raid manual, but says... (3 Replies)
Discussion started by: adelgadom
3 Replies
6. SCO
Can anybody help me out to mount USB flash /floppy drive in sco openserver 6.0 . (5 Replies)
Discussion started by: sureshdrajan
5 Replies
7. Solaris
Hello all..
I have a Verbatim 2 GB flash drive. I also have Solaris 10 running on my workstation. If I am in the Windows environment, it detects the flash drive. But when I plug it while I am in solaris, nothing happens. How will solaris 10 detect my flash drive? What do I have to do?
any... (4 Replies)
Discussion started by: vr76413
4 Replies
8. Filesystems, Disks and Memory
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies
9. UNIX for Dummies Questions & Answers
:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows......
dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/????????
Where I have the question marks is the problem.
How do I find out what the... (4 Replies)
Discussion started by: shorty
4 Replies
FLASH(9) BSD Kernel Developer's Manual FLASH(9)
NAME
flash -- subsystem for flash-like memory devices
SYNOPSIS
#include <dev/flash/flash.h>
device_t
flash_attach_mi(const struct flash_interface *fl, device_t dev);
DESCRIPTION
Flash-like devices can register themselves to the flash layer with the flash_hw_if structure. This structure has function pointers and other
fields.
The attachment can be done by calling flash_attach_mi() with this structure and the device's device_t as an argument. Return value is the
flash layer device. The flash_interface structure is shown below.
struct flash_interface {
int (*erase) (device_t, struct flash_erase_instruction *);
int (*read) (device_t, off_t, size_t, size_t *, uint8_t *);
int (*write) (device_t, off_t, size_t, size_t *, const uint8_t *);
int (*block_markbad)(device_t, uint64_t);
int (*block_isbad)(device_t, uint64_t);
int (*sync) (device_t);
int (*submit)(device_t, struct buf *);
/* storage for partition info */
struct flash_partition partition;
/* total size of mtd */
flash_addr_t size;
uint32_t page_size;
uint32_t erasesize;
uint32_t writesize;
uint32_t minor;
uint8_t type;
};
SEE ALSO
flash(4), nand(9)
AUTHORS
Adam Hoka <ahoka@NetBSD.org>
BSD
March 31, 2011 BSD