Login or Register to Ask a Question and Join Our Community


Software Releases - RSS News

Clonezilla 1.2.1-33 (Live testing branch)

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Special Forums News, Links, Events and Announcements Software Releases - RSS News Clonezilla 1.2.1-33 (Live testing branch)
# 1  
Old 01-16-2009
Clonezilla 1.2.1-33 (Live testing branch)
ImageClonezilla is a partition or disk cloning toolsimilar to Symantec Ghost. It saves and restoresonly blocks in use on the hard drive if the filesystem is supported. For unsupported file systems,dd is used instead. It has been used to clone a 5GB system to 40 clients in about 10 minutes.License: GNU General Public License (GPL)Changes:
Some features were added, and bugs were fixed. Thefeatures added are related to the new Spanishlanguage support and MS Windows clone. An optionwas added so that the CHS of an NTFS bootpartition can be fixed by ntfsreloc. The hiddendata between the MBR and the first partition willbe cloned. This is useful for some recovery toolson MS Windows. Some minor bugs were fixed.Image

Image

More...
Login or Register to Ask a Question

Previous Thread | Next Thread
Login or Register to Ask a Question

LEARN ABOUT SUSE

hd

HD(4)							     Linux Programmer's Manual							     HD(4)

NAME

       hd - MFM/IDE hard disk devices

DESCRIPTION

       The  hd*  devices  are block devices to access MFM/IDE hard disk drives in raw mode.  The master drive on the primary IDE controller (major
       device number 3) is hda; the slave drive is hdb.  The master drive of the second controller (major device number 22) is hdc and	the  slave
       hdd.

       General	IDE block device names have the form hdX, or hdXP, where X is a letter denoting the physical drive, and P is a number denoting the
       partition on that physical drive.  The first form, hdX, is used to address the whole drive.  Partition numbers are assigned  in	the  order
       the  partitions	are  discovered,  and only nonempty, nonextended partitions get a number.  However, partition numbers 1-4 are given to the
       four partitions described in the MBR (the "primary" partitions), regardless of whether they are unused or extended.  Thus, the first  logi-
       cal  partition  will be hdX5.  Both DOS-type partitioning and BSD-disklabel partitioning are supported.	You can have at most 63 partitions
       on an IDE disk.

       For example, /dev/hda refers to all of the first IDE drive in the system; and /dev/hdb3 refers to the third DOS "primary" partition on  the
       second one.

       They are typically created by:

	      mknod -m 660 /dev/hda b 3 0
	      mknod -m 660 /dev/hda1 b 3 1
	      mknod -m 660 /dev/hda2 b 3 2
	      ...
	      mknod -m 660 /dev/hda8 b 3 8
	      mknod -m 660 /dev/hdb b 3 64
	      mknod -m 660 /dev/hdb1 b 3 65
	      mknod -m 660 /dev/hdb2 b 3 66
	      ...
	      mknod -m 660 /dev/hdb8 b 3 72
	      chown root:disk /dev/hd*

FILES

       /dev/hd*

SEE ALSO

       chown(1), mknod(1), sd(4), mount(8)

COLOPHON

       This  page is part of release 3.25 of the Linux man-pages project.  A description of the project, and information about reporting bugs, can
       be found at http://www.kernel.org/doc/man-pages/.

Linux								    1992-12-17								     HD(4)