T-023: Multiple Vulnerabilities in Cisco PIX and Cisco ASA
Multiple vulnerabilities exist in the Cisco ASA 5500 Series Adaptive Security Appliances and Cisco PIX Security Appliances: 1) Windows NT domain authentication bypass; 2) IPv6 Denial of Service; and 3) Crypto Accelerator memory leak. NOTE: These vulnerabilities are independent of each other. A device may be affected by one vulnerability and not affected by another. The risk is MEDIUM. A remote intruder could make a VPN connection to a network without needing to authenticate.
Hi all,
I need this as soon as possible to solve it or at least to find out what is the problem.
I have configured IPSec tunnels with Openswan and Cisco ASA, i have established a connection and the ping was fine, but after some time there is request time out from both sites. I don't have ASA... (0 Replies)
Hi,I want connect my ASA 5510 firewall to a 3750 switch with RIP routing. Unfortunately,I am having issues passing the VPN subnet through rip to the 3750.I don't understand how the routing table is populated on the ASA. Any suggestions? (0 Replies)
Hi,
I am trying to establish vpn between my linux server and cisco asa at client side.
I installed openswan on my cent os.
Linux Server
eth0 - 182.2.29.10
Gateway - 182.2.29.1
eth1 - 192.9.200.75
I have simple IPtables Like
WAN="eth0"
LAN="eth1" (0 Replies)
I having problem connecting to a Cisco PIX
Log from IKE
# /usr/lib/inet/in.iked -f /etc/inet/ike/config -d
Jan 16 00:40:57: 2012 (+0800) *** in.iked started ***
Jan 16 00:40:57: Loading configuration...
Jan 16 00:40:57: Checking lifetimes in "nullrule"
Jan 16 00:40:57: Using default value... (0 Replies)
RAPOLICY(1) General Commands Manual RAPOLICY(1)NAME
rapolicy - compare a argus(8) data file/stream against a Cisco Access Control List.
COPYRIGHT
Copyright (c) 2000-2003 QoSient. All rights reserved.
SYNOPSIS
rapolicy -r argus-file [ra options]
DESCRIPTION
Rapolicy reads argus data from an argus-file list, and tests the argus data stream against a Cisco access control list configuration file,
printing out records that represent activity that would violate the policy. Rapolicy can be used to indicate access control violations, as
well as test new access control definitions prior to installing them in a router.
OPTIONS
Rapolicy, like all ra based clients, supports a large number of options. Options that have specific meaning to rapolicy are:
-f <Cisco ACL file> Print records that violate the policy.
-D 0 (default) Print records that violate the policy.
-D 1 Print records and the violated ruleset.
-D 2 Print all records and the ruleset that matched.
See ra(1) for a complete description of ra options.
EXAMPLE INVOCATION
rapolicy -r argus.file
CISCO ACL SYNTAX
There does not seem to be authoritative Cisco-ACL-Documentation, nor ACL syntax standardization. Because Cisco has been know to improve
its ACL rules syntax, rapolicy is known to work with Cisco ACL router defintions up to July, 2002.
A Cisco ACL configuration file consists of a collection of any number of ACL statements, each on a separte line. The syntax of an ACL
statement is:
ACL = "access-list" ID ACTION PROTOCOL SRC DST NOTIFICATION
ID = Number
ACTION = permit | deny
PROTO = protocol name | protocol number
SRC | DST = ADDRESS [PORTMATCH]
ADDRESS = any | host HOSTADDR | HOSTADDR HOSTMASK
HOSTADDR = ipV4 address
HOSTMASK = matching-mask
PORTMATCH = PORTOP PORTNUM | range PORTRANGE
PORTOP = eq | lt | gt | neq | established
PORTRANGE = PORTNUM PORTNUM
PORTNUM = TCP or UDP port value (unsigned decimal from 0 to 65535)
EXAMPLE CONFIGURATION
This example Cisco Access Control List configuration is provided as an example only. No effort has been made to verify that this example
Access Control List enforces a useful access control policy of any kind.
#allow www-traffic to webserver
access-list 102 permit tcp any 193.174.13.99 0.0.0.0 eq 80
#allow ftp control connection to server
access-list 102 permit tcp any 193.174.13.99 0.0.0.0 eq 21
#allow normal ftp
access-list 102 permit tcp any 193.174.13.99 0.0.0.0 eq 20
#allow ftp passive conncetions in portrange 10000 to 10500
access-list 102 permit tcp any host 193.174.13.99 range 10000 10500
#dummy example
access-list 102 permit tcp host 193.174.13.1 eq 12345 host 193.174.13.2 range 12345 23456
#deny the rest
access-list 102 deny tcp any any
#same thing in other words:
access-list 102 deny tcp 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255
AUTHORS
Carter Bullard (carter@qosient.com).
Olaf Gellert (gellert@pca.dfn.de).
SEE ALSO ra(1), rarc(5), argus(8)
22 July 2002 RAPOLICY(1)